From 38281ff738bc9a561085f39c427ce3f5b6f0d791 Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Fri, 20 May 2011 15:30:15 -0400 Subject: 0.0.10 docs RC --- docs/source/adc.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'docs/source/adc.rst') diff --git a/docs/source/adc.rst b/docs/source/adc.rst index af613cc..f3d5f55 100644 --- a/docs/source/adc.rst +++ b/docs/source/adc.rst @@ -20,7 +20,7 @@ number of techniques must be used to get good precision and accuracy. Noise and Bias -------------- -.. FIXME [0.0.10, Maple-specific] +.. FIXME [0.0.11, Maple form factor-specific] The biggest issues with analog-digital conversion are noise and bias. With the Maple, we have tried to isolate the ADC pins and traces from @@ -38,7 +38,7 @@ voltages that the sample is being compared against. In the case of the Maple, the high reference is |vcc| and the low reference is ground. This means that noise or fluctuations on either |vcc| or ground will affect the measurement. It also means that the voltage you are trying -to sample must be between ground and 3.3V. +to sample must be between ground and 3.3V. .. _adc-range: -- cgit v1.2.3