From dba64f7f00469da2cd5ee82f44c25fb8a069e6aa Mon Sep 17 00:00:00 2001 From: bnewbold Date: Sat, 28 Feb 2015 23:40:36 -0800 Subject: board support: nucleo -> st_nucleo_f103rb Also correct attribution in Wirish board.h --- support/make/board-includes/nucleo.mk | 10 -- support/make/board-includes/st_nucleo_f103rb.mk | 10 ++ wirish/boards/nucleo/board.cpp | 149 --------------------- wirish/boards/nucleo/include/board/board.h | 102 -------------- wirish/boards/st_nucleo_f103rb/board.cpp | 149 +++++++++++++++++++++ .../boards/st_nucleo_f103rb/include/board/board.h | 102 ++++++++++++++ 6 files changed, 261 insertions(+), 261 deletions(-) delete mode 100644 support/make/board-includes/nucleo.mk create mode 100644 support/make/board-includes/st_nucleo_f103rb.mk delete mode 100644 wirish/boards/nucleo/board.cpp delete mode 100644 wirish/boards/nucleo/include/board/board.h create mode 100644 wirish/boards/st_nucleo_f103rb/board.cpp create mode 100644 wirish/boards/st_nucleo_f103rb/include/board/board.h diff --git a/support/make/board-includes/nucleo.mk b/support/make/board-includes/nucleo.mk deleted file mode 100644 index a2943ce..0000000 --- a/support/make/board-includes/nucleo.mk +++ /dev/null @@ -1,10 +0,0 @@ -MCU := STM32F103RB -PRODUCT_ID := 0003 -ERROR_LED_PORT := GPIOA -ERROR_LED_PIN := 5 -MCU_SERIES := stm32f1 -MCU_F1_LINE := performance -# This crap is due to ld-script limitations. If you know of a better -# way to go about this (like some magic ld switches to specify MEMORY -# at the command line), please tell us! -LD_MEM_DIR := sram_20k_flash_128k diff --git a/support/make/board-includes/st_nucleo_f103rb.mk b/support/make/board-includes/st_nucleo_f103rb.mk new file mode 100644 index 0000000..a2943ce --- /dev/null +++ b/support/make/board-includes/st_nucleo_f103rb.mk @@ -0,0 +1,10 @@ +MCU := STM32F103RB +PRODUCT_ID := 0003 +ERROR_LED_PORT := GPIOA +ERROR_LED_PIN := 5 +MCU_SERIES := stm32f1 +MCU_F1_LINE := performance +# This crap is due to ld-script limitations. If you know of a better +# way to go about this (like some magic ld switches to specify MEMORY +# at the command line), please tell us! +LD_MEM_DIR := sram_20k_flash_128k diff --git a/wirish/boards/nucleo/board.cpp b/wirish/boards/nucleo/board.cpp deleted file mode 100644 index 641f542..0000000 --- a/wirish/boards/nucleo/board.cpp +++ /dev/null @@ -1,149 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2011 LeafLabs, LLC. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -/** - * @file wirish/boards/nucleo/board.cpp - * @author Grégoire Passault - * @brief Nucleo board file - * - * This mapping was done using the NUCLEO documentation and may be incomplete - * or contains error - * - * If you want to use the PWM outputs, consider understanding all the remapping - * process that can be involved. You may have to tweak this file regarding your goals. - */ - -#include // For this board's header file - -#include // For stm32_pin_info and its contents - // (these go into PIN_MAP). - -#include "boards_private.h" // For PMAP_ROW(), which makes - // PIN_MAP easier to read. - -// boardInit(): NUCLEO rely on some remapping -void boardInit(void) { - afio_remap(AFIO_REMAP_TIM2_FULL); - afio_remap(AFIO_REMAP_TIM3_PARTIAL); -} - -namespace wirish { -namespace priv { -static stm32f1_rcc_pll_data pll_data = {RCC_PLLMUL_9}; -rcc_clk w_board_pll_in_clk = RCC_CLK_HSI; -rcc_pll_cfg w_board_pll_cfg = {RCC_PLLSRC_HSI_DIV_2, &pll_data}; -} -} - -// Pin map: this lets the basic I/O functions (digitalWrite(), -// analogRead(), pwmWrite()) translate from pin numbers to STM32 -// peripherals. -// -// PMAP_ROW() lets us specify a row (really a struct stm32_pin_info) -// in the pin map. Its arguments are: -// -// - GPIO device for the pin (GPIOA, etc.) -// - GPIO bit for the pin (0 through 15) -// - Timer device, or NULL if none -// - Timer channel (1 to 4, for PWM), or 0 if none -// - ADC device, or NULL if none -// - ADC channel, or ADCx if none -extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = { - - /* Arduino-like header, right connectors */ - - PMAP_ROW(GPIOA, 3, NULL, 0, ADC1, 3), /* D0/PA3 */ - PMAP_ROW(GPIOA, 2, NULL, 0, ADC1, 2), /* D1/PA2 */ - PMAP_ROW(GPIOA, 10, NULL, 0, NULL, ADCx), /* D2/PA10 */ - PMAP_ROW(GPIOB, 3, TIMER2, 2, NULL, ADCx), /* D3/PB3 REMAPPED */ - PMAP_ROW(GPIOB, 5, NULL, 0, NULL, ADCx), /* D4/PB5 */ - PMAP_ROW(GPIOB, 4, TIMER3, 1, NULL, ADCx), /* D5/PB4 REMAPPED */ - PMAP_ROW(GPIOB, 10, TIMER2, 3, NULL, ADCx), /* D6/PB10 REMAPPED */ - PMAP_ROW(GPIOA, 8, NULL, 0, NULL, ADCx), /* D7/PA8 */ - - PMAP_ROW(GPIOA, 9, NULL, 0, NULL, ADCx), /* D8/PA9 */ - PMAP_ROW(GPIOC, 7, NULL, 0, NULL, ADCx), /* D9/PC7 */ - PMAP_ROW(GPIOB, 6, TIMER4, 1, NULL, ADCx), /* D10/PB6 */ - PMAP_ROW(GPIOA, 7, TIMER3, 2, ADC1, 7), /* D11/PA7 */ - PMAP_ROW(GPIOA, 6, NULL, 0, ADC1, 6), /* D12/PA6 */ - PMAP_ROW(GPIOA, 5, NULL, 0, ADC1, 5), /* D13/PA5 LED*/ - PMAP_ROW(GPIOB, 9, NULL, 0, NULL, ADCx), /* D14/PB9 */ - PMAP_ROW(GPIOB, 8, NULL, 0, NULL, ADCx), /* D15/PB8 */ - - /* Arduino-like header, left connectors */ - - PMAP_ROW(GPIOA, 0, TIMER2, 1, ADC1, 0), /* D16/A0/PA0 */ - PMAP_ROW(GPIOA, 1, TIMER2, 2, ADC1, 1), /* D17/A1/PA1 */ - PMAP_ROW(GPIOA, 4, NULL, 0, ADC1, 4), /* D18/A2/PA4 */ - PMAP_ROW(GPIOB, 0, TIMER3, 3, ADC1, 8), /* D19/A3/PB0 */ - PMAP_ROW(GPIOC, 1, NULL, 0, ADC1, 11), /* D20/A4/PC1 */ - PMAP_ROW(GPIOC, 0, NULL, 0, ADC1, 10), /* D21/A5/PC0 */ - - /* Other pins */ - - PMAP_ROW(GPIOB, 7, NULL, 0, NULL, ADCx), /* D22/PB7 */ - PMAP_ROW(GPIOC, 2, NULL, 0, ADC1, 12), /* D23/PC2 */ - PMAP_ROW(GPIOC, 3, NULL, 0, ADC1, 13), /* D24/PC3 */ - PMAP_ROW(GPIOC, 4, NULL, 0, ADC1, 14), /* D25/PC4 */ - PMAP_ROW(GPIOC, 5, NULL, 0, ADC1, 15), /* D26/PC5 */ - - PMAP_ROW(GPIOC, 13, NULL, 0, NULL, ADCx), /* D27/PC13 USER BLUE BUTTON */ - PMAP_ROW(GPIOC, 14, NULL, 0, NULL, ADCx), /* D28/PC14 */ - PMAP_ROW(GPIOC, 15, NULL, 0, NULL, ADCx), /* D29/PC15 */ - PMAP_ROW(GPIOD, 2, NULL, 0, NULL, ADCx), /* D30/PD2 */ - PMAP_ROW(GPIOC, 10, NULL, 0, NULL, ADCx), /* D31/PC10 */ - PMAP_ROW(GPIOB, 1, NULL, 0, ADC1, 9), /* D32/PB1 */ - PMAP_ROW(GPIOB, 11, NULL, 0, NULL, ADCx), /* D33/PB11 */ - PMAP_ROW(GPIOB, 12, NULL, 0, NULL, ADCx), /* D34/PB12 */ - PMAP_ROW(GPIOB, 13, NULL, 0, NULL, ADCx), /* D35/PB13 */ - PMAP_ROW(GPIOB, 14, NULL, 0, NULL, ADCx), /* D36/PB14 */ - PMAP_ROW(GPIOB, 15, NULL, 0, NULL, ADCx), /* D37/PB15 */ - PMAP_ROW(GPIOC, 6, NULL, 0, NULL, ADCx), /* D38/PC6 */ - PMAP_ROW(GPIOC, 8, NULL, 0, NULL, ADCx), /* D39/PC8 */ - PMAP_ROW(GPIOC, 9, NULL, 0, NULL, ADCx), /* D40/PC9 */ - - PMAP_ROW(GPIOA, 13, NULL, 0, NULL, ADCx), /* D41/PA13 */ - PMAP_ROW(GPIOA, 14, NULL, 0, NULL, ADCx), /* D42/PA14 */ - PMAP_ROW(GPIOA, 15, NULL, 0, NULL, ADCx), /* D43/PA15 */ -}; - -// Array of pins you can use for pwmWrite(). Keep it in Flash because -// it doesn't change, and so we don't waste RAM. -extern const uint8 boardPWMPins[] __FLASH__ = { - 3, 5, 6, 10, 11, 16, 17, 19 -}; - -// Array of pins you can use for analogRead(). -extern const uint8 boardADCPins[] __FLASH__ = { - 16, 17, 18, 19, 20, 21 -}; - -// Array of pins that the board uses for something special. Other than -// the button and the LED, it's usually best to leave these pins alone -// unless you know what you're doing. -extern const uint8 boardUsedPins[] __FLASH__ = { - BOARD_LED_PIN, BOARD_BUTTON_PIN -}; diff --git a/wirish/boards/nucleo/include/board/board.h b/wirish/boards/nucleo/include/board/board.h deleted file mode 100644 index f7e3a38..0000000 --- a/wirish/boards/nucleo/include/board/board.h +++ /dev/null @@ -1,102 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2011 LeafLabs, LLC. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -/** - * @file wirish/boards/maple/include/board/board.h - * @author Marti Bolivar - * @brief Maple board header. - */ - -#ifndef _BOARD_MAPLE_H_ -#define _BOARD_MAPLE_H_ - -/** - * If you solder an external oscillator, you may run the board at 72mhz, - * else, we keep it at 36mhz for simplicity and stability - */ -#define CYCLES_PER_MICROSECOND 36 - -/* Pin number for the built-in button. */ -#define BOARD_BUTTON_PIN 27 - -/* Pin number for the built-in LED. */ -#define BOARD_LED_PIN 13 - -/* Number of USARTs/UARTs whose pins are broken out to headers. */ -#define BOARD_NR_USARTS 3 - -/* USART pin numbers. */ -#define BOARD_USART1_TX_PIN 7 -#define BOARD_USART1_RX_PIN 8 -#define BOARD_USART2_TX_PIN 1 -#define BOARD_USART2_RX_PIN 0 -#define BOARD_USART3_TX_PIN 29 -#define BOARD_USART3_RX_PIN 30 - -/* Number of SPI ports broken out to headers. */ -#define BOARD_NR_SPI 2 - -/* SPI pin numbers. */ -#define BOARD_SPI1_NSS_PIN 10 -#define BOARD_SPI1_MOSI_PIN 11 -#define BOARD_SPI1_MISO_PIN 12 -#define BOARD_SPI1_SCK_PIN 13 -#define BOARD_SPI2_NSS_PIN 31 -#define BOARD_SPI2_MOSI_PIN 34 -#define BOARD_SPI2_MISO_PIN 33 -#define BOARD_SPI2_SCK_PIN 32 - -/* Total number of GPIO pins that are broken out to headers and - * intended for use. This includes pins like the LED, button, and - * debug port (JTAG/SWD) pins. */ -#define BOARD_NR_GPIO_PINS 44 - -/* Number of pins capable of PWM output. */ -#define BOARD_NR_PWM_PINS 8 - -/* Number of pins capable of ADC conversion. */ -#define BOARD_NR_ADC_PINS 6 - -/* Number of pins already connected to external hardware. For Maple, - * these are just BOARD_LED_PIN, BOARD_BUTTON_PIN, and the debug port - * pins (see below). */ -#define BOARD_NR_USED_PINS 2 - -/** - * Note: there is no USB in this board. - */ - -/* Pin aliases: these give the GPIO port/bit for each pin as an - * enum. These are optional, but recommended. They make it easier to - * write code using low-level GPIO functionality. */ -enum { - PA3, PA2, PA0, PA1, PB5, PB6, PA8, PA9, PA10, PB7, PA4, PA7, PA6, PA5, PB8, - PC0, PC1, PC2, PC3, PC4, PC5, PC13, PC14, PC15, PB9, PD2, PC10, PB0, PB1, - PB10, PB11, PB12, PB13, PB14, PB15, PC6, PC7, PC8, PC9, PA13, PA14, PA15, - PB3, PB4 -}; - -#endif diff --git a/wirish/boards/st_nucleo_f103rb/board.cpp b/wirish/boards/st_nucleo_f103rb/board.cpp new file mode 100644 index 0000000..ea2f5c6 --- /dev/null +++ b/wirish/boards/st_nucleo_f103rb/board.cpp @@ -0,0 +1,149 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file wirish/boards/st_nucleo_f103rb/board.cpp + * @author Grégoire Passault + * @brief st_nucleo_f103rb board file + * + * This mapping was done using the NUCLEO documentation and may be incomplete + * or contains error + * + * If you want to use the PWM outputs, consider understanding all the remapping + * process that can be involved. You may have to tweak this file regarding your goals. + */ + +#include // For this board's header file + +#include // For stm32_pin_info and its contents + // (these go into PIN_MAP). + +#include "boards_private.h" // For PMAP_ROW(), which makes + // PIN_MAP easier to read. + +// boardInit(): NUCLEO rely on some remapping +void boardInit(void) { + afio_remap(AFIO_REMAP_TIM2_FULL); + afio_remap(AFIO_REMAP_TIM3_PARTIAL); +} + +namespace wirish { +namespace priv { +static stm32f1_rcc_pll_data pll_data = {RCC_PLLMUL_9}; +rcc_clk w_board_pll_in_clk = RCC_CLK_HSI; +rcc_pll_cfg w_board_pll_cfg = {RCC_PLLSRC_HSI_DIV_2, &pll_data}; +} +} + +// Pin map: this lets the basic I/O functions (digitalWrite(), +// analogRead(), pwmWrite()) translate from pin numbers to STM32 +// peripherals. +// +// PMAP_ROW() lets us specify a row (really a struct stm32_pin_info) +// in the pin map. Its arguments are: +// +// - GPIO device for the pin (GPIOA, etc.) +// - GPIO bit for the pin (0 through 15) +// - Timer device, or NULL if none +// - Timer channel (1 to 4, for PWM), or 0 if none +// - ADC device, or NULL if none +// - ADC channel, or ADCx if none +extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = { + + /* Arduino-like header, right connectors */ + + PMAP_ROW(GPIOA, 3, NULL, 0, ADC1, 3), /* D0/PA3 */ + PMAP_ROW(GPIOA, 2, NULL, 0, ADC1, 2), /* D1/PA2 */ + PMAP_ROW(GPIOA, 10, NULL, 0, NULL, ADCx), /* D2/PA10 */ + PMAP_ROW(GPIOB, 3, TIMER2, 2, NULL, ADCx), /* D3/PB3 REMAPPED */ + PMAP_ROW(GPIOB, 5, NULL, 0, NULL, ADCx), /* D4/PB5 */ + PMAP_ROW(GPIOB, 4, TIMER3, 1, NULL, ADCx), /* D5/PB4 REMAPPED */ + PMAP_ROW(GPIOB, 10, TIMER2, 3, NULL, ADCx), /* D6/PB10 REMAPPED */ + PMAP_ROW(GPIOA, 8, NULL, 0, NULL, ADCx), /* D7/PA8 */ + + PMAP_ROW(GPIOA, 9, NULL, 0, NULL, ADCx), /* D8/PA9 */ + PMAP_ROW(GPIOC, 7, NULL, 0, NULL, ADCx), /* D9/PC7 */ + PMAP_ROW(GPIOB, 6, TIMER4, 1, NULL, ADCx), /* D10/PB6 */ + PMAP_ROW(GPIOA, 7, TIMER3, 2, ADC1, 7), /* D11/PA7 */ + PMAP_ROW(GPIOA, 6, NULL, 0, ADC1, 6), /* D12/PA6 */ + PMAP_ROW(GPIOA, 5, NULL, 0, ADC1, 5), /* D13/PA5 LED*/ + PMAP_ROW(GPIOB, 9, NULL, 0, NULL, ADCx), /* D14/PB9 */ + PMAP_ROW(GPIOB, 8, NULL, 0, NULL, ADCx), /* D15/PB8 */ + + /* Arduino-like header, left connectors */ + + PMAP_ROW(GPIOA, 0, TIMER2, 1, ADC1, 0), /* D16/A0/PA0 */ + PMAP_ROW(GPIOA, 1, TIMER2, 2, ADC1, 1), /* D17/A1/PA1 */ + PMAP_ROW(GPIOA, 4, NULL, 0, ADC1, 4), /* D18/A2/PA4 */ + PMAP_ROW(GPIOB, 0, TIMER3, 3, ADC1, 8), /* D19/A3/PB0 */ + PMAP_ROW(GPIOC, 1, NULL, 0, ADC1, 11), /* D20/A4/PC1 */ + PMAP_ROW(GPIOC, 0, NULL, 0, ADC1, 10), /* D21/A5/PC0 */ + + /* Other pins */ + + PMAP_ROW(GPIOB, 7, NULL, 0, NULL, ADCx), /* D22/PB7 */ + PMAP_ROW(GPIOC, 2, NULL, 0, ADC1, 12), /* D23/PC2 */ + PMAP_ROW(GPIOC, 3, NULL, 0, ADC1, 13), /* D24/PC3 */ + PMAP_ROW(GPIOC, 4, NULL, 0, ADC1, 14), /* D25/PC4 */ + PMAP_ROW(GPIOC, 5, NULL, 0, ADC1, 15), /* D26/PC5 */ + + PMAP_ROW(GPIOC, 13, NULL, 0, NULL, ADCx), /* D27/PC13 USER BLUE BUTTON */ + PMAP_ROW(GPIOC, 14, NULL, 0, NULL, ADCx), /* D28/PC14 */ + PMAP_ROW(GPIOC, 15, NULL, 0, NULL, ADCx), /* D29/PC15 */ + PMAP_ROW(GPIOD, 2, NULL, 0, NULL, ADCx), /* D30/PD2 */ + PMAP_ROW(GPIOC, 10, NULL, 0, NULL, ADCx), /* D31/PC10 */ + PMAP_ROW(GPIOB, 1, NULL, 0, ADC1, 9), /* D32/PB1 */ + PMAP_ROW(GPIOB, 11, NULL, 0, NULL, ADCx), /* D33/PB11 */ + PMAP_ROW(GPIOB, 12, NULL, 0, NULL, ADCx), /* D34/PB12 */ + PMAP_ROW(GPIOB, 13, NULL, 0, NULL, ADCx), /* D35/PB13 */ + PMAP_ROW(GPIOB, 14, NULL, 0, NULL, ADCx), /* D36/PB14 */ + PMAP_ROW(GPIOB, 15, NULL, 0, NULL, ADCx), /* D37/PB15 */ + PMAP_ROW(GPIOC, 6, NULL, 0, NULL, ADCx), /* D38/PC6 */ + PMAP_ROW(GPIOC, 8, NULL, 0, NULL, ADCx), /* D39/PC8 */ + PMAP_ROW(GPIOC, 9, NULL, 0, NULL, ADCx), /* D40/PC9 */ + + PMAP_ROW(GPIOA, 13, NULL, 0, NULL, ADCx), /* D41/PA13 */ + PMAP_ROW(GPIOA, 14, NULL, 0, NULL, ADCx), /* D42/PA14 */ + PMAP_ROW(GPIOA, 15, NULL, 0, NULL, ADCx), /* D43/PA15 */ +}; + +// Array of pins you can use for pwmWrite(). Keep it in Flash because +// it doesn't change, and so we don't waste RAM. +extern const uint8 boardPWMPins[] __FLASH__ = { + 3, 5, 6, 10, 11, 16, 17, 19 +}; + +// Array of pins you can use for analogRead(). +extern const uint8 boardADCPins[] __FLASH__ = { + 16, 17, 18, 19, 20, 21 +}; + +// Array of pins that the board uses for something special. Other than +// the button and the LED, it's usually best to leave these pins alone +// unless you know what you're doing. +extern const uint8 boardUsedPins[] __FLASH__ = { + BOARD_LED_PIN, BOARD_BUTTON_PIN +}; diff --git a/wirish/boards/st_nucleo_f103rb/include/board/board.h b/wirish/boards/st_nucleo_f103rb/include/board/board.h new file mode 100644 index 0000000..7788cd8 --- /dev/null +++ b/wirish/boards/st_nucleo_f103rb/include/board/board.h @@ -0,0 +1,102 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file wirish/boards/st_nucleo_f103rb/include/board/board.h + * @author Grégoire Passault + * @brief st_nucleo_f103rb board header. + */ + +#ifndef _BOARD_MAPLE_H_ +#define _BOARD_MAPLE_H_ + +/** + * If you solder an external oscillator, you may run the board at 72mhz, + * else, we keep it at 36mhz for simplicity and stability + */ +#define CYCLES_PER_MICROSECOND 36 + +/* Pin number for the built-in button. */ +#define BOARD_BUTTON_PIN 27 + +/* Pin number for the built-in LED. */ +#define BOARD_LED_PIN 13 + +/* Number of USARTs/UARTs whose pins are broken out to headers. */ +#define BOARD_NR_USARTS 3 + +/* USART pin numbers. */ +#define BOARD_USART1_TX_PIN 7 +#define BOARD_USART1_RX_PIN 8 +#define BOARD_USART2_TX_PIN 1 +#define BOARD_USART2_RX_PIN 0 +#define BOARD_USART3_TX_PIN 29 +#define BOARD_USART3_RX_PIN 30 + +/* Number of SPI ports broken out to headers. */ +#define BOARD_NR_SPI 2 + +/* SPI pin numbers. */ +#define BOARD_SPI1_NSS_PIN 10 +#define BOARD_SPI1_MOSI_PIN 11 +#define BOARD_SPI1_MISO_PIN 12 +#define BOARD_SPI1_SCK_PIN 13 +#define BOARD_SPI2_NSS_PIN 31 +#define BOARD_SPI2_MOSI_PIN 34 +#define BOARD_SPI2_MISO_PIN 33 +#define BOARD_SPI2_SCK_PIN 32 + +/* Total number of GPIO pins that are broken out to headers and + * intended for use. This includes pins like the LED, button, and + * debug port (JTAG/SWD) pins. */ +#define BOARD_NR_GPIO_PINS 44 + +/* Number of pins capable of PWM output. */ +#define BOARD_NR_PWM_PINS 8 + +/* Number of pins capable of ADC conversion. */ +#define BOARD_NR_ADC_PINS 6 + +/* Number of pins already connected to external hardware. For Maple, + * these are just BOARD_LED_PIN, BOARD_BUTTON_PIN, and the debug port + * pins (see below). */ +#define BOARD_NR_USED_PINS 2 + +/** + * Note: there is no USB in this board. + */ + +/* Pin aliases: these give the GPIO port/bit for each pin as an + * enum. These are optional, but recommended. They make it easier to + * write code using low-level GPIO functionality. */ +enum { + PA3, PA2, PA0, PA1, PB5, PB6, PA8, PA9, PA10, PB7, PA4, PA7, PA6, PA5, PB8, + PC0, PC1, PC2, PC3, PC4, PC5, PC13, PC14, PC15, PB9, PD2, PC10, PB0, PB1, + PB10, PB11, PB12, PB13, PB14, PB15, PC6, PC7, PC8, PC9, PA13, PA14, PA15, + PB3, PB4 +}; + +#endif -- cgit v1.2.3