From cb2f3071fcd49590499888c27c8f325699eafda9 Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Tue, 15 Nov 2011 16:05:12 -0500 Subject: Move wirish/comm/*.cpp into wirish. The wirish/comm/ directory is stupid. Signed-off-by: Marti Bolivar --- wirish/HardwareSPI.cpp | 319 +++++++++++++++++++++++++++++++++++++++++ wirish/HardwareSerial.cpp | 120 ++++++++++++++++ wirish/comm/HardwareSPI.cpp | 319 ----------------------------------------- wirish/comm/HardwareSerial.cpp | 120 ---------------- wirish/rules.mk | 5 +- 5 files changed, 441 insertions(+), 442 deletions(-) create mode 100644 wirish/HardwareSPI.cpp create mode 100644 wirish/HardwareSerial.cpp delete mode 100644 wirish/comm/HardwareSPI.cpp delete mode 100644 wirish/comm/HardwareSerial.cpp diff --git a/wirish/HardwareSPI.cpp b/wirish/HardwareSPI.cpp new file mode 100644 index 0000000..e1f186e --- /dev/null +++ b/wirish/HardwareSPI.cpp @@ -0,0 +1,319 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @author Marti Bolivar + * @brief Wirish SPI implementation. + */ + +#include + +#include +#include +#include + +#include +#include + +struct spi_pins { + uint8 nss; + uint8 sck; + uint8 miso; + uint8 mosi; +}; + +static const spi_pins* dev_to_spi_pins(spi_dev *dev); + +static void enable_device(spi_dev *dev, + bool as_master, + SPIFrequency frequency, + spi_cfg_flag endianness, + spi_mode mode); + +static const spi_pins board_spi_pins[] __FLASH__ = { + {BOARD_SPI1_NSS_PIN, + BOARD_SPI1_SCK_PIN, + BOARD_SPI1_MISO_PIN, + BOARD_SPI1_MOSI_PIN}, + {BOARD_SPI2_NSS_PIN, + BOARD_SPI2_SCK_PIN, + BOARD_SPI2_MISO_PIN, + BOARD_SPI2_MOSI_PIN}, +#ifdef STM32_HIGH_DENSITY + {BOARD_SPI3_NSS_PIN, + BOARD_SPI3_SCK_PIN, + BOARD_SPI3_MISO_PIN, + BOARD_SPI3_MOSI_PIN}, +#endif +}; + + +/* + * Constructor + */ + +HardwareSPI::HardwareSPI(uint32 spi_num) { + switch (spi_num) { + case 1: + this->spi_d = SPI1; + break; + case 2: + this->spi_d = SPI2; + break; +#ifdef STM32_HIGH_DENSITY + case 3: + this->spi_d = SPI3; + break; +#endif + default: + ASSERT(0); + } +} + +/* + * Set up/tear down + */ + +void HardwareSPI::begin(SPIFrequency frequency, uint32 bitOrder, uint32 mode) { + if (mode >= 4) { + ASSERT(0); + return; + } + spi_cfg_flag end = bitOrder == MSBFIRST ? SPI_FRAME_MSB : SPI_FRAME_LSB; + spi_mode m = (spi_mode)mode; + enable_device(this->spi_d, true, frequency, end, m); +} + +void HardwareSPI::begin(void) { + this->begin(SPI_1_125MHZ, MSBFIRST, 0); +} + +void HardwareSPI::beginSlave(uint32 bitOrder, uint32 mode) { + if (mode >= 4) { + ASSERT(0); + return; + } + spi_cfg_flag end = bitOrder == MSBFIRST ? SPI_FRAME_MSB : SPI_FRAME_LSB; + spi_mode m = (spi_mode)mode; + enable_device(this->spi_d, false, (SPIFrequency)0, end, m); +} + +void HardwareSPI::beginSlave(void) { + this->beginSlave(MSBFIRST, 0); +} + +void HardwareSPI::end(void) { + if (!spi_is_enabled(this->spi_d)) { + return; + } + + // Follows RM0008's sequence for disabling a SPI in master/slave + // full duplex mode. + while (spi_is_rx_nonempty(this->spi_d)) { + // FIXME [0.1.0] remove this once you have an interrupt based driver + volatile uint16 rx __attribute__((unused)) = spi_rx_reg(this->spi_d); + } + while (!spi_is_tx_empty(this->spi_d)) + ; + while (spi_is_busy(this->spi_d)) + ; + spi_peripheral_disable(this->spi_d); +} + +/* + * I/O + */ + +uint8 HardwareSPI::read(void) { + uint8 buf[1]; + this->read(buf, 1); + return buf[0]; +} + +void HardwareSPI::read(uint8 *buf, uint32 len) { + uint32 rxed = 0; + while (rxed < len) { + while (!spi_is_rx_nonempty(this->spi_d)) + ; + buf[rxed++] = (uint8)spi_rx_reg(this->spi_d); + } +} + +void HardwareSPI::write(uint8 byte) { + this->write(&byte, 1); +} + +void HardwareSPI::write(const uint8 *data, uint32 length) { + uint32 txed = 0; + while (txed < length) { + txed += spi_tx(this->spi_d, data + txed, length - txed); + } +} + +uint8 HardwareSPI::transfer(uint8 byte) { + this->write(byte); + return this->read(); +} + +/* + * Pin accessors + */ + +uint8 HardwareSPI::misoPin(void) { + return dev_to_spi_pins(this->spi_d)->miso; +} + +uint8 HardwareSPI::mosiPin(void) { + return dev_to_spi_pins(this->spi_d)->mosi; +} + +uint8 HardwareSPI::sckPin(void) { + return dev_to_spi_pins(this->spi_d)->sck; +} + +uint8 HardwareSPI::nssPin(void) { + return dev_to_spi_pins(this->spi_d)->nss; +} + +/* + * Deprecated functions + */ + +uint8 HardwareSPI::send(uint8 data) { + uint8 buf[] = {data}; + return this->send(buf, 1); +} + +uint8 HardwareSPI::send(uint8 *buf, uint32 len) { + uint32 txed = 0; + uint8 ret = 0; + while (txed < len) { + this->write(buf[txed++]); + ret = this->read(); + } + return ret; +} + +uint8 HardwareSPI::recv(void) { + return this->read(); +} + +/* + * Auxiliary functions + */ + +static void configure_gpios(spi_dev *dev, bool as_master); +static spi_baud_rate determine_baud_rate(spi_dev *dev, SPIFrequency freq); + +static const spi_pins* dev_to_spi_pins(spi_dev *dev) { + switch (dev->clk_id) { + case RCC_SPI1: return board_spi_pins; + case RCC_SPI2: return board_spi_pins + 1; +#ifdef STM32_HIGH_DENSITY + case RCC_SPI3: return board_spi_pins + 2; +#endif + default: return NULL; + } +} + +/* Enables the device in master or slave full duplex mode. If you + * change this code, you must ensure that appropriate changes are made + * to HardwareSPI::end(). */ +static void enable_device(spi_dev *dev, + bool as_master, + SPIFrequency freq, + spi_cfg_flag endianness, + spi_mode mode) { + spi_baud_rate baud = determine_baud_rate(dev, freq); + uint32 cfg_flags = (endianness | SPI_DFF_8_BIT | SPI_SW_SLAVE | + (as_master ? SPI_SOFT_SS : 0)); + + spi_init(dev); + configure_gpios(dev, as_master); + if (as_master) { + spi_master_enable(dev, baud, mode, cfg_flags); + } else { + spi_slave_enable(dev, mode, cfg_flags); + } +} + +static void disable_pwm(const stm32_pin_info *i) { + if (i->timer_device) { + timer_set_mode(i->timer_device, i->timer_channel, TIMER_DISABLED); + } +} + +static void configure_gpios(spi_dev *dev, bool as_master) { + const spi_pins *pins = dev_to_spi_pins(dev); + + if (!pins) { + return; + } + + const stm32_pin_info *nssi = &PIN_MAP[pins->nss]; + const stm32_pin_info *scki = &PIN_MAP[pins->sck]; + const stm32_pin_info *misoi = &PIN_MAP[pins->miso]; + const stm32_pin_info *mosii = &PIN_MAP[pins->mosi]; + + disable_pwm(nssi); + disable_pwm(scki); + disable_pwm(misoi); + disable_pwm(mosii); + + spi_gpio_cfg(as_master, + nssi->gpio_device, + nssi->gpio_bit, + scki->gpio_device, + scki->gpio_bit, + misoi->gpio_bit, + mosii->gpio_bit); +} + +static const spi_baud_rate baud_rates[MAX_SPI_FREQS] __FLASH__ = { + SPI_BAUD_PCLK_DIV_2, + SPI_BAUD_PCLK_DIV_4, + SPI_BAUD_PCLK_DIV_8, + SPI_BAUD_PCLK_DIV_16, + SPI_BAUD_PCLK_DIV_32, + SPI_BAUD_PCLK_DIV_64, + SPI_BAUD_PCLK_DIV_128, + SPI_BAUD_PCLK_DIV_256, +}; + +/* + * Note: This assumes you're on a LeafLabs-style board + * (CYCLES_PER_MICROSECOND == 72, APB2 at 72MHz, APB1 at 36MHz). + */ +static spi_baud_rate determine_baud_rate(spi_dev *dev, SPIFrequency freq) { + if (rcc_dev_clk(dev->clk_id) == RCC_APB2 && freq == SPI_140_625KHZ) { + /* APB2 peripherals are too fast for 140.625 KHz */ + ASSERT(0); + return (spi_baud_rate)~0; + } + return (rcc_dev_clk(dev->clk_id) == RCC_APB2 ? + baud_rates[freq + 1] : + baud_rates[freq]); +} diff --git a/wirish/HardwareSerial.cpp b/wirish/HardwareSerial.cpp new file mode 100644 index 0000000..a9eb763 --- /dev/null +++ b/wirish/HardwareSerial.cpp @@ -0,0 +1,120 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file HardwareSerial.cpp + * @brief Wirish serial port implementation. + */ + +#include + +#include +#include +#include + +#include + +#define TX1 BOARD_USART1_TX_PIN +#define RX1 BOARD_USART1_RX_PIN +#define TX2 BOARD_USART2_TX_PIN +#define RX2 BOARD_USART2_RX_PIN +#define TX3 BOARD_USART3_TX_PIN +#define RX3 BOARD_USART3_RX_PIN +#if defined STM32_HIGH_DENSITY && !defined(BOARD_maple_RET6) +#define TX4 BOARD_UART4_TX_PIN +#define RX4 BOARD_UART4_RX_PIN +#define TX5 BOARD_UART5_TX_PIN +#define RX5 BOARD_UART5_RX_PIN +#endif + +HardwareSerial Serial1(USART1, TX1, RX1, STM32_PCLK2); +HardwareSerial Serial2(USART2, TX2, RX2, STM32_PCLK1); +HardwareSerial Serial3(USART3, TX3, RX3, STM32_PCLK1); +#if defined(STM32_HIGH_DENSITY) && !defined(BOARD_maple_RET6) +HardwareSerial Serial4(UART4, TX4, RX4, STM32_PCLK1); +HardwareSerial Serial5(UART5, TX5, RX5, STM32_PCLK1); +#endif + +HardwareSerial::HardwareSerial(usart_dev *usart_device, + uint8 tx_pin, + uint8 rx_pin, + uint32 clock_speed) { + this->usart_device = usart_device; + this->clock_speed = clock_speed; + this->tx_pin = tx_pin; + this->rx_pin = rx_pin; +} + +/* + * Set up/tear down + */ + +void HardwareSerial::begin(uint32 baud) { + ASSERT(baud <= usart_device->max_baud); + + if (baud > usart_device->max_baud) { + return; + } + + const stm32_pin_info *txi = &PIN_MAP[tx_pin]; + const stm32_pin_info *rxi = &PIN_MAP[rx_pin]; + + gpio_set_mode(txi->gpio_device, txi->gpio_bit, GPIO_AF_OUTPUT_PP); + gpio_set_mode(rxi->gpio_device, rxi->gpio_bit, GPIO_INPUT_FLOATING); + + if (txi->timer_device != NULL) { + /* Turn off any PWM if there's a conflict on this GPIO bit. */ + timer_set_mode(txi->timer_device, txi->timer_channel, TIMER_DISABLED); + } + + usart_init(usart_device); + usart_set_baud_rate(usart_device, clock_speed, baud); + usart_enable(usart_device); +} + +void HardwareSerial::end(void) { + usart_disable(usart_device); +} + +/* + * I/O + */ + +uint8 HardwareSerial::read(void) { + return usart_getc(usart_device); +} + +uint32 HardwareSerial::available(void) { + return usart_data_available(usart_device); +} + +void HardwareSerial::write(unsigned char ch) { + usart_putc(usart_device, ch); +} + +void HardwareSerial::flush(void) { + usart_reset_rx(usart_device); +} diff --git a/wirish/comm/HardwareSPI.cpp b/wirish/comm/HardwareSPI.cpp deleted file mode 100644 index e1f186e..0000000 --- a/wirish/comm/HardwareSPI.cpp +++ /dev/null @@ -1,319 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2010 Perry Hung. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -/** - * @author Marti Bolivar - * @brief Wirish SPI implementation. - */ - -#include - -#include -#include -#include - -#include -#include - -struct spi_pins { - uint8 nss; - uint8 sck; - uint8 miso; - uint8 mosi; -}; - -static const spi_pins* dev_to_spi_pins(spi_dev *dev); - -static void enable_device(spi_dev *dev, - bool as_master, - SPIFrequency frequency, - spi_cfg_flag endianness, - spi_mode mode); - -static const spi_pins board_spi_pins[] __FLASH__ = { - {BOARD_SPI1_NSS_PIN, - BOARD_SPI1_SCK_PIN, - BOARD_SPI1_MISO_PIN, - BOARD_SPI1_MOSI_PIN}, - {BOARD_SPI2_NSS_PIN, - BOARD_SPI2_SCK_PIN, - BOARD_SPI2_MISO_PIN, - BOARD_SPI2_MOSI_PIN}, -#ifdef STM32_HIGH_DENSITY - {BOARD_SPI3_NSS_PIN, - BOARD_SPI3_SCK_PIN, - BOARD_SPI3_MISO_PIN, - BOARD_SPI3_MOSI_PIN}, -#endif -}; - - -/* - * Constructor - */ - -HardwareSPI::HardwareSPI(uint32 spi_num) { - switch (spi_num) { - case 1: - this->spi_d = SPI1; - break; - case 2: - this->spi_d = SPI2; - break; -#ifdef STM32_HIGH_DENSITY - case 3: - this->spi_d = SPI3; - break; -#endif - default: - ASSERT(0); - } -} - -/* - * Set up/tear down - */ - -void HardwareSPI::begin(SPIFrequency frequency, uint32 bitOrder, uint32 mode) { - if (mode >= 4) { - ASSERT(0); - return; - } - spi_cfg_flag end = bitOrder == MSBFIRST ? SPI_FRAME_MSB : SPI_FRAME_LSB; - spi_mode m = (spi_mode)mode; - enable_device(this->spi_d, true, frequency, end, m); -} - -void HardwareSPI::begin(void) { - this->begin(SPI_1_125MHZ, MSBFIRST, 0); -} - -void HardwareSPI::beginSlave(uint32 bitOrder, uint32 mode) { - if (mode >= 4) { - ASSERT(0); - return; - } - spi_cfg_flag end = bitOrder == MSBFIRST ? SPI_FRAME_MSB : SPI_FRAME_LSB; - spi_mode m = (spi_mode)mode; - enable_device(this->spi_d, false, (SPIFrequency)0, end, m); -} - -void HardwareSPI::beginSlave(void) { - this->beginSlave(MSBFIRST, 0); -} - -void HardwareSPI::end(void) { - if (!spi_is_enabled(this->spi_d)) { - return; - } - - // Follows RM0008's sequence for disabling a SPI in master/slave - // full duplex mode. - while (spi_is_rx_nonempty(this->spi_d)) { - // FIXME [0.1.0] remove this once you have an interrupt based driver - volatile uint16 rx __attribute__((unused)) = spi_rx_reg(this->spi_d); - } - while (!spi_is_tx_empty(this->spi_d)) - ; - while (spi_is_busy(this->spi_d)) - ; - spi_peripheral_disable(this->spi_d); -} - -/* - * I/O - */ - -uint8 HardwareSPI::read(void) { - uint8 buf[1]; - this->read(buf, 1); - return buf[0]; -} - -void HardwareSPI::read(uint8 *buf, uint32 len) { - uint32 rxed = 0; - while (rxed < len) { - while (!spi_is_rx_nonempty(this->spi_d)) - ; - buf[rxed++] = (uint8)spi_rx_reg(this->spi_d); - } -} - -void HardwareSPI::write(uint8 byte) { - this->write(&byte, 1); -} - -void HardwareSPI::write(const uint8 *data, uint32 length) { - uint32 txed = 0; - while (txed < length) { - txed += spi_tx(this->spi_d, data + txed, length - txed); - } -} - -uint8 HardwareSPI::transfer(uint8 byte) { - this->write(byte); - return this->read(); -} - -/* - * Pin accessors - */ - -uint8 HardwareSPI::misoPin(void) { - return dev_to_spi_pins(this->spi_d)->miso; -} - -uint8 HardwareSPI::mosiPin(void) { - return dev_to_spi_pins(this->spi_d)->mosi; -} - -uint8 HardwareSPI::sckPin(void) { - return dev_to_spi_pins(this->spi_d)->sck; -} - -uint8 HardwareSPI::nssPin(void) { - return dev_to_spi_pins(this->spi_d)->nss; -} - -/* - * Deprecated functions - */ - -uint8 HardwareSPI::send(uint8 data) { - uint8 buf[] = {data}; - return this->send(buf, 1); -} - -uint8 HardwareSPI::send(uint8 *buf, uint32 len) { - uint32 txed = 0; - uint8 ret = 0; - while (txed < len) { - this->write(buf[txed++]); - ret = this->read(); - } - return ret; -} - -uint8 HardwareSPI::recv(void) { - return this->read(); -} - -/* - * Auxiliary functions - */ - -static void configure_gpios(spi_dev *dev, bool as_master); -static spi_baud_rate determine_baud_rate(spi_dev *dev, SPIFrequency freq); - -static const spi_pins* dev_to_spi_pins(spi_dev *dev) { - switch (dev->clk_id) { - case RCC_SPI1: return board_spi_pins; - case RCC_SPI2: return board_spi_pins + 1; -#ifdef STM32_HIGH_DENSITY - case RCC_SPI3: return board_spi_pins + 2; -#endif - default: return NULL; - } -} - -/* Enables the device in master or slave full duplex mode. If you - * change this code, you must ensure that appropriate changes are made - * to HardwareSPI::end(). */ -static void enable_device(spi_dev *dev, - bool as_master, - SPIFrequency freq, - spi_cfg_flag endianness, - spi_mode mode) { - spi_baud_rate baud = determine_baud_rate(dev, freq); - uint32 cfg_flags = (endianness | SPI_DFF_8_BIT | SPI_SW_SLAVE | - (as_master ? SPI_SOFT_SS : 0)); - - spi_init(dev); - configure_gpios(dev, as_master); - if (as_master) { - spi_master_enable(dev, baud, mode, cfg_flags); - } else { - spi_slave_enable(dev, mode, cfg_flags); - } -} - -static void disable_pwm(const stm32_pin_info *i) { - if (i->timer_device) { - timer_set_mode(i->timer_device, i->timer_channel, TIMER_DISABLED); - } -} - -static void configure_gpios(spi_dev *dev, bool as_master) { - const spi_pins *pins = dev_to_spi_pins(dev); - - if (!pins) { - return; - } - - const stm32_pin_info *nssi = &PIN_MAP[pins->nss]; - const stm32_pin_info *scki = &PIN_MAP[pins->sck]; - const stm32_pin_info *misoi = &PIN_MAP[pins->miso]; - const stm32_pin_info *mosii = &PIN_MAP[pins->mosi]; - - disable_pwm(nssi); - disable_pwm(scki); - disable_pwm(misoi); - disable_pwm(mosii); - - spi_gpio_cfg(as_master, - nssi->gpio_device, - nssi->gpio_bit, - scki->gpio_device, - scki->gpio_bit, - misoi->gpio_bit, - mosii->gpio_bit); -} - -static const spi_baud_rate baud_rates[MAX_SPI_FREQS] __FLASH__ = { - SPI_BAUD_PCLK_DIV_2, - SPI_BAUD_PCLK_DIV_4, - SPI_BAUD_PCLK_DIV_8, - SPI_BAUD_PCLK_DIV_16, - SPI_BAUD_PCLK_DIV_32, - SPI_BAUD_PCLK_DIV_64, - SPI_BAUD_PCLK_DIV_128, - SPI_BAUD_PCLK_DIV_256, -}; - -/* - * Note: This assumes you're on a LeafLabs-style board - * (CYCLES_PER_MICROSECOND == 72, APB2 at 72MHz, APB1 at 36MHz). - */ -static spi_baud_rate determine_baud_rate(spi_dev *dev, SPIFrequency freq) { - if (rcc_dev_clk(dev->clk_id) == RCC_APB2 && freq == SPI_140_625KHZ) { - /* APB2 peripherals are too fast for 140.625 KHz */ - ASSERT(0); - return (spi_baud_rate)~0; - } - return (rcc_dev_clk(dev->clk_id) == RCC_APB2 ? - baud_rates[freq + 1] : - baud_rates[freq]); -} diff --git a/wirish/comm/HardwareSerial.cpp b/wirish/comm/HardwareSerial.cpp deleted file mode 100644 index a9eb763..0000000 --- a/wirish/comm/HardwareSerial.cpp +++ /dev/null @@ -1,120 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2010 Perry Hung. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -/** - * @file HardwareSerial.cpp - * @brief Wirish serial port implementation. - */ - -#include - -#include -#include -#include - -#include - -#define TX1 BOARD_USART1_TX_PIN -#define RX1 BOARD_USART1_RX_PIN -#define TX2 BOARD_USART2_TX_PIN -#define RX2 BOARD_USART2_RX_PIN -#define TX3 BOARD_USART3_TX_PIN -#define RX3 BOARD_USART3_RX_PIN -#if defined STM32_HIGH_DENSITY && !defined(BOARD_maple_RET6) -#define TX4 BOARD_UART4_TX_PIN -#define RX4 BOARD_UART4_RX_PIN -#define TX5 BOARD_UART5_TX_PIN -#define RX5 BOARD_UART5_RX_PIN -#endif - -HardwareSerial Serial1(USART1, TX1, RX1, STM32_PCLK2); -HardwareSerial Serial2(USART2, TX2, RX2, STM32_PCLK1); -HardwareSerial Serial3(USART3, TX3, RX3, STM32_PCLK1); -#if defined(STM32_HIGH_DENSITY) && !defined(BOARD_maple_RET6) -HardwareSerial Serial4(UART4, TX4, RX4, STM32_PCLK1); -HardwareSerial Serial5(UART5, TX5, RX5, STM32_PCLK1); -#endif - -HardwareSerial::HardwareSerial(usart_dev *usart_device, - uint8 tx_pin, - uint8 rx_pin, - uint32 clock_speed) { - this->usart_device = usart_device; - this->clock_speed = clock_speed; - this->tx_pin = tx_pin; - this->rx_pin = rx_pin; -} - -/* - * Set up/tear down - */ - -void HardwareSerial::begin(uint32 baud) { - ASSERT(baud <= usart_device->max_baud); - - if (baud > usart_device->max_baud) { - return; - } - - const stm32_pin_info *txi = &PIN_MAP[tx_pin]; - const stm32_pin_info *rxi = &PIN_MAP[rx_pin]; - - gpio_set_mode(txi->gpio_device, txi->gpio_bit, GPIO_AF_OUTPUT_PP); - gpio_set_mode(rxi->gpio_device, rxi->gpio_bit, GPIO_INPUT_FLOATING); - - if (txi->timer_device != NULL) { - /* Turn off any PWM if there's a conflict on this GPIO bit. */ - timer_set_mode(txi->timer_device, txi->timer_channel, TIMER_DISABLED); - } - - usart_init(usart_device); - usart_set_baud_rate(usart_device, clock_speed, baud); - usart_enable(usart_device); -} - -void HardwareSerial::end(void) { - usart_disable(usart_device); -} - -/* - * I/O - */ - -uint8 HardwareSerial::read(void) { - return usart_getc(usart_device); -} - -uint32 HardwareSerial::available(void) { - return usart_data_available(usart_device); -} - -void HardwareSerial::write(unsigned char ch) { - usart_putc(usart_device, ch); -} - -void HardwareSerial::flush(void) { - usart_reset_rx(usart_device); -} diff --git a/wirish/rules.mk b/wirish/rules.mk index 923c17b..6fa3a28 100644 --- a/wirish/rules.mk +++ b/wirish/rules.mk @@ -3,7 +3,6 @@ sp := $(sp).x dirstack_$(sp) := $(d) d := $(dir) BUILDDIRS += $(BUILD_PATH)/$(d) -BUILDDIRS += $(BUILD_PATH)/$(d)/comm # Board config -- TODO allow user override WIRISH_BOARD_PATH := boards/$(BOARD) @@ -21,8 +20,8 @@ cSRCS_$(d) := start_c.c cppSRCS_$(d) := wirish_math.cpp \ Print.cpp \ boards.cpp \ - comm/HardwareSerial.cpp \ - comm/HardwareSPI.cpp \ + HardwareSerial.cpp \ + HardwareSPI.cpp \ HardwareTimer.cpp \ usb_serial.cpp \ cxxabi-compat.cpp \ -- cgit v1.2.3