From 2aed7be7393851d277cd4b9577f50c4ef9b4182b Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Fri, 27 May 2011 22:08:39 -0400 Subject: Docs: Update gpio.rst. Add a section about GPIO ports, since that existed nowhere. Made a ref for 5V tolerance. Other clarifications and improvements. --- docs/source/gpio.rst | 106 +++++++++++++++++++++++++++++++-------------------- 1 file changed, 65 insertions(+), 41 deletions(-) diff --git a/docs/source/gpio.rst b/docs/source/gpio.rst index 64ad494..af1de20 100644 --- a/docs/source/gpio.rst +++ b/docs/source/gpio.rst @@ -7,18 +7,67 @@ Each LeafLabs board comes with ready-to-use General Purpose Input/Output (GPIO) pins, which are numbered starting from zero. These numbers are listed on your board's silkscreen, next to where the pin is broken out to a header. Many pins may additionally be used for -special features or peripheral functions. +special features or interfacing with other hardware. .. contents:: Contents :local: +.. _gpio-modes: + +GPIO Modes +---------- + +Each GPIO pin can be configured using :ref:`lang-pinmode` to behave in +a number of ways: as a digital output pin, as an analog input pin, +etc. + +A :ref:`WiringPinMode ` value specifies +the complete set of possible configurations; not every pin can have +all of these modes. For example, on the Maple, pin 15 may have mode +``INPUT_ANALOG``, but not ``PWM``. See your board's :ref:`pin maps +` and its silkscreen for more information on what +functionality is available on each pin. + +Function Reference +------------------ + +- :ref:`lang-pinmode` + +- :ref:`lang-digitalread` + +- :ref:`lang-digitalwrite` + +- :ref:`lang-analogread` + +- :ref:`lang-pwmwrite` (Maple's equivalent to ``analogWrite()``; see + :ref:`lang-analogwrite` for differences from the Arduino version). + +.. _gpio-ports: + +GPIO Ports +---------- + +Normally, you'll interact with pins using just their number (or a +constant like :ref:`BOARD_LED_PIN ` which +stands for a number). However, behind the scenes, the STM32 +microcontroller on your board separates the pins into groups called +*GPIO ports*. Each GPIO port is given a letter, so for example, +there's GPIO port A, port B, and so on\ [#fnumports]_. The pins on a +GPIO port are given *bit numbers*, which go from 0 to 15. In ST's +documentation, a pin is given by the letter "P", followed by its port +letter and bit number. For instance, "PA4" is GPIO port A, bit 4. + .. _gpio-pin-maps: Pin Maps -------- -The hardware documentation for your board lists each pin's -capabilities, by pin number: +Part of :ref:`Maple IDE's ` job is to convert normal pin numbers +into the corresponding GPIO port and bit when you call functions like +:ref:`lang-pinmode`. It does this using a *pin map*, which lists the +GPIO port and bit for each pin number. The GPIO documentation for +your board includes its pin map, which also lists the other +peripherals by pin number: .. TODO [0.0.12] Native link @@ -28,46 +77,15 @@ capabilities, by pin number: .. * :ref:`Maple Native ` +.. _gpio-5v-tolerant: + The current and voltage limitations were determined using the STM32 datasheets. In particular, only some GPIO pins are **5V tolerant**, which means that applying 5 volts to a pin and reading it as input or allowing it to drain to ground will not damage that pin. Connecting a -voltage higher than 3.3 V to a non-5 V tolerant pin may damage your +voltage higher than 3.3V to a non-5V tolerant pin may damage your board. -.. _gpio-modes: - -GPIO Modes ----------- - -Each of the GPIO pins on a Maple board may be configured using -pinMode() to behave in a number of ways: as a digital output pin, -or as an analog input pin, etc., depending on the particular pin. - -A ``WiringPinMode`` value specifies the complete set of possible -configurations; not every pin can have all of these modes. For -example, on the Maple, pin 15 may have mode ``INPUT_ANALOG``, but not -``PWM``. See your :ref:`board's pin maps ` and its -silkscreen for more information on what functionality is available on -each pin. - -.. doxygenenum:: WiringPinMode - -Function Reference ------------------- - -- :ref:`pinMode() ` - -- :ref:`digitalRead() ` - -- :ref:`digitalWrite() ` - -- :ref:`analogRead() ` - -- :ref:`pwmWrite() ` (Maple's equivalent to - ``analogWrite()``; see the :ref:`analogWrite() reference - ` for differences from the Arduino version). - .. _gpio-recommended-reading: Recommended Reading @@ -75,9 +93,15 @@ Recommended Reading * ST Documentation for the STM32F103 series of microcontrollers: - * `Reference Manual `_ (pdf) + * `Reference Manual RM0008 + `_ + (PDF); general, definitive resource for STM32F1 line. + * `Programming Manual PM0056 + `_ + (PDF); assembly language and register reference. - * `Programming Manual - `_ - (PDF; assembly language and register reference) +.. rubric:: Footnotes +.. [#fnumports] The total number of GPIO ports depends on what board + you have. For example, Maple Mini has three: ports A, B, and C. + Maple Native has seven: ports A through G. -- cgit v1.2.3