| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| ... | |
| |
|
|
|
| |
Forgot openocd support script in
0e5eb75c80bd8036bf85bfe0cce09d1fce56f50a.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1) Reset, halt, and unprotect the the flash before writing to it.
This fixes a bug in which every other flash attempt would fail.
2) Maple R5 and below have NRST and JTNRST erroneously tied together,
resulting in a full TAP and system reset when a reset is asserted.
This prevents the 'reset halt' command from working.
This can be fixed hard-hack style by cutting the trace out of JTNRST.
Users of the Leaf Maple JTAG adapter will also need to cut the trace
between TRST and SRST.
3) Assuming you have a functioning 'reset halt' setup (see 2),
the 'make debug' command now halts the chip and waits for a gdb
connection before proceeding execution.
|
| |
|
|
|
| |
Small script to detect the openocd version and choose the appropriate
debug/flash script for use with JTAG debugging.
|
| |
|
|
|
|
|
| |
Committing the results of running the following on the libmaple root
directory:
$ fromdos `grep --exclude-dir='[.]git' -Ilsr $'\r$' .`
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
Entries for high-density interrupt vectors were incorrectly declared to
be .weak instead of .long.
Thanks redfox74!
|
| | |
|
| |
|
|
|
| |
Add common linker scripts for ram and rom. Add medium and high density
libraries for libcs3.
|
| |\
| |
| |
| |
| |
| |
| |
| |
| | |
This provides DMA, IWDG, PWR, and BKP support, and fixes several bugs.
Conflicts:
libmaple/adc.h
libmaple/libmaple.h
libmaple/ring_buffer.h
|
| | |\ |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | | |
treated as a timeout.
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | | |
flash and run scripts for opencd v0.4.0
also snuck in a gitignore rule for notes/
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | | |
Made some changes to Servo to get it to compile from within the IDE.
Also fixed a lurking broken link in the docs.
|
| | | | |
|
| | |/
|/|
| |
| | |
still need usb descriptors to improve, and also nothing else is tested.
|
| | |
| |
| |
| |
| |
| |
| |
| | |
Redirect thread-mode execution to a fail routine which throbs the LED to
indicate a hard fault. Because the fail routine runs in thread mode
with interrupts on, USB auto-reset should now work. Test by executing
some bogus instruction (e.g. *(volatile int*)0xf34fdaa = 0;) and check
that the auto-reset continues to work.
|
| | |
| |
| |
| |
| |
| |
| | |
The USB reset scheme on OS X is unreliable. Adding a little bit of sleep
seems to make it much more reliable. This will probably do until we get
a chance to rewrite the USB stack and redo the whole auto-reset
scheme...
|
| |/ |
|
| | |
|
| | |
|
| | |
|
| |\ |
|
| | |
| |
| |
| | |
Still not working but fixed a lot of merge errors
|
| | |\
| | |
| | |
| | | |
This compiles for both maple and maple_native but is untested.
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Updated Makefile to read the directory where libmaple is from the
environment variable LIBMAPLE_PATH, if it exists, defaulting to the
current working directory otherwise.
Updated reset.py to look around in /dev for the Maple serial port,
prompting the user if there appear to be multiple possibilities and
complaining if there aren't any.
|
| | |/
|/|
| |
| | |
support/make/build-rules.mk
|
| |/
|
|
|
|
| |
Fixes a bug noted by several users when using math functions like cos(),
sqrt(), etc in the Maple IDE. This bug did not seem to affect Makefile
compiles.
|
| | |
|
| |
|
|
|
| |
The makefile 'install' target should upload to whatever the last build
target was, regardless of the environment's value of MAPLE_TARGET.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Major build system rewrite. New and exciting:
1. Proper dependency tracking. All source files including header files
should be properly tracked and recompiled as necessary when they are
changed.
2. Build-type tracking. If the target changes from 'ram' to 'flash,'
for example, the build system will force a rebuild rather than
incorrectly link modules to a different address.
3. New targets:
The old 'ram,' 'flash,' and 'jtag' targets have been replaced with
the environment variable MAPLE_TARGET, which controls the link address.
Users can either export it to their environment, or pass MAPLE_TARGET on
the command-line. Once this is set, sketches can be compiled with 'make
sketch,' or simply 'make.'
Note: the default is MAPLE_TARGET='flash.'
The target 'install' now automagically uploads the sketch to the board
using the appropriate method.
The 'run' target has been renamed to 'debug.' It starts an openocd gdb
server.
4. Odds and ends:
-Verbose and 'quiet' modes. Set V=1 for verbose compilation, the default
is quiet.
-Object file sizes and disassembly information is generated and placed
in build/$(BOARD).sizes and build/$(BOARD).disas, respectively.
-Parallel make with -j should speed things up if you have multiple
cores.
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
current version gets stuck in the isr somewhere. not sure why or where. must debug.
|
| |
|
|
| |
now we reset from recv bytes. After receiving the DTR/RTS toggle the next byte in from usb is parsed as the program_delay. For now, this just delays the reset for a period to close the serial port gracefully. Later, this delay will perhaps inform the bootloader of how long to live for...
|
