aboutsummaryrefslogtreecommitdiffstats
path: root/support/make
Commit message (Collapse)AuthorAgeFilesLines
* ld/make: Add support for STM3220G-EVAL board.Marti Bolivar2012-04-111-0/+4
| | | | Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Add build support for targeting multiple STM32 series.Marti Bolivar2012-04-116-6/+12
| | | | | | | | | | | | | | | | | | | Add an MCU_SERIES variable to each of the files under support/make/board-includes, which declares the series as "stm32f1" in each case. Use this in target-config.mk when determining LD_SERIES_PATH (with a hack since we only support performance line) and LIBMAPLE_MODULE_SERIES. We must move support/ld/stm32/series/f1 to .../series/stm32f1 as a side-effect. Adding support for other series (e.g. "stm32f2") should now be a matter of filling in the contents of libmaple/<series>/ and support/ld/stm32/<series>/ appropriately (along with moving the rest of the nonportable code out of the libmaple core and into the STM32F1 series submodule). Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* build system: Add board include files for target-config.mk.Marti Bolivar2012-04-116-45/+33
| | | | | | | | | | | | target-config.mk is getting a little long with all the boards in it. Break out the board-specific bits into individual files under support/make/board-includes. This has the added benefit that adding a new board requires less dirtying of the working tree, which is nice for jumping around branches with an experimental board. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Great renaming: use "series" instead of "family".Marti Bolivar2012-04-111-3/+3
| | | | | | | | | | | | | | | | | This is for greater consistency with the ST application notes, which refer to migrating "across" series (e.g. F1 to F2), but compatibility "within" a family (e.g. F1). So: - Move libmaple/stm32x/include/family to .../include/series/ and fix up includes appropriately. - Refer to "family" headers as "series" headers in comments. - Make similar "find and replace"-style changes to build system variable names and comments. - Move support/ld/stm32/family to .../stm32/series. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Rename GLOBAL_FLAGS to TARGET_FLAGS, remove from Makefile.Marti Bolivar2012-04-111-0/+15
| | | | | | | | Move into target-config.mk. Build it up bit-by-bit as the build goes on. Repeat the DENSITY defines once per board in target-config.mk, since they don't make sense on STM32F2. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Revert "Added libs in libraries/ to the include path"Marti Bolivar2012-04-111-1/+0
| | | | | | | | This reverts commit 628750bf82135cc1ca25784c8b39eb771ae87024. Don't mess with LIBMAPLE_INCLUDES. This variable comprises include directories for libmaple proper, not for libraries that depend upon libmaple.
* target-config.mk: Remove FLASH_SIZE, SRAM_SIZE settings.Marti Bolivar2012-04-111-10/+0
| | | | | | Unused. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Tweak family-specific linker file layout.Marti Bolivar2012-04-111-1/+1
| | | | | | | | | | | | | Move support/ld/stm32/f1/performance/vector_symbols.inc to support/ld/stm32/family/f1/performance/vector_symbols.inc Creating directory "family" under support/ld/stm32 will allow parallel directories (e.g. support/ld/stm32/mcu) to exist, which allows an eventual linker script cleanup to go much more smoothly. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Remove CS3-style initialization.Marti Bolivar2012-04-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove libcs3-related bits from support/ld. Break them out into libmaple proper and Wirish as appropriate: vector table definition and ISR declarations go into libmaple proper, and startup code goes into Wirish. Vector table symbols are included into common.inc from an STM32 family-specific directory under support/ld/stm32. This is a combination of 5 commits. Individual commit messages follow: libcs3_stm32_src: Don't depend on cs3.h. So we can use the existing toolchain. Move ISR decls/vector table into libmaple proper. This allows us to configure the vector table on a per-family basis. - Move support/ld/libcs3_stm32_src/stm32_isrs.S stm32_vector_table.S to libmaple/stm32f1/isrs_performance.S vector_table_performance.S, respectively. The directory libmaple/stm32f1/ is intended to hold all STM32F1-specific code within libmaple. Obviously, there's a lot of work to do before this becomes true. - support/ld/libcs3_stm32_src/Makefile: Don't try to compile stm32_isrs.S and stm32_vector_table.S anymore. - Add libmaple/stm32f1/rules.mk to include these new files in the standard libmaple build. - support/make/target-config.mk: Add LIBMAPLE_MODULE_FAMILY, which selects a directory to use as a family-specific libmaple submodule. - Makefile: Add LIBMAPLE_MODULE_FAMILY to LIBMAPLE_MODULES. Remove support/ld/libcs3_stm32_src and derived object files. From support/ld/libcs3_stm32_src, move start.S and start_c.c into Wirish. Modify wirish/rules.mk accordingly. Delete support/ld/libcs3_stm32_*_density.a. These are no longer necessary, as the relevant objects are included in the standard Wirish build. Remove the GROUP statements from the board linker scripts accordingly. Remove SEARCH_DIR(.) from common.inc; it's no longer necessary. Also fix up some comments that are now out of date. wirish/start_c.c: Don't use CS3-style memory initialization. Switch memory initialization to a simpler style of initializing .data if necessary, then zeroing .bss. Initializing .data is only necessary during Flash builds, since during RAM builds, LOADADDR(.data) == ADDR(.data). This makes libmaple completely incompatible with the CS3 startup sequence. Subsequent commits will clean up the namespace to reflect that fact. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Make vector table symbols family-specific during linking.Marti Bolivar2011-11-151-0/+8
| | | | | | | | | | | | | | | | | - support/make/target-config.mk: add LD_FAMILY_PATH, the directory to search for STM32 family-specific link configuration files. For now, this is just a stub which points to support/ld/stm32/f1/performance, since that's all we currently support. We can add the logic to support different STM32 families here later. - Makefile: Pass -L $(LD_FAMILY_PATH) to linker. - Rename support/ld/names.inc to support/ld/stm32/f1/performance/vector_symbols.inc. - common.inc: INCLUDE vector_symbols.inc instead of names.inc. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Add support for the Olimex STM32 H103 board.David Kiliani2011-09-271-0/+10
| | | | | | | | Pin layout and header files for the STM32 H103 prototype board from Olimex featuring an STM32F103RBT6 chip. This commit contains all necessary changes to compile with BOARD=olimex_stm32_h103. Signed-off-by: David Kiliani <mail@davidkiliani.de>
* [make] Factor out target/board configuration.Marti Bolivar2011-09-131-0/+56
| | | | | | | | | Comment the Makefile more verbosely. It's been causing confusion on the forums. Add target-config.mk, this contains build configuration depending on the BOARD and MEMORY_TARGET variables. Its contents were cluttering up the Makefile and making it harder to read.
* Added libs in libraries/ to the include pathCamille Moncelier2011-06-021-0/+1
| | | | | | | | - This allows to including of libs headers eg: #include <Servo.h> which wasn't possible for some reason.
* openocd: Detect openocd versionPerry Hung2011-05-261-1/+1
| | | | | Small script to detect the openocd version and choose the appropriate debug/flash script for use with JTAG debugging.
* Enable USB auto-reset in a hard fault.Perry Hung2010-09-171-2/+5
| | | | | | | | Redirect thread-mode execution to a fail routine which throbs the LED to indicate a hard fault. Because the fail routine runs in thread mode with interrupts on, USB auto-reset should now work. Test by executing some bogus instruction (e.g. *(volatile int*)0xf34fdaa = 0;) and check that the auto-reset continues to work.
* exposed build-targets.mkMarti Bolivar2010-09-131-35/+0
|
* Various fixes, working with Maplebnewbold2010-09-011-3/+4
|\
| * Portability fixesbnewbold2010-08-311-2/+3
| | | | | | | | Still not working but fixed a lot of merge errors
| * MEMORY_TARGET not MAPLE_TARGETbnewbold2010-08-251-2/+2
| |
* | fix reset.py to work on OS X,; .gitignore leaves out ~ files; cleanupMarti Bolivar2010-08-291-3/+0
|/ | | | support/make/build-rules.mk
* makefile: fix install targetPerry Hung2010-07-081-2/+3
| | | | | The makefile 'install' target should upload to whatever the last build target was, regardless of the environment's value of MAPLE_TARGET.
* more codeblocks fixes; verbose build outputbnewbold2010-07-081-2/+5
|
* make: Modularize makefiles, add dependency tracking, build-type trackingPerry Hung2010-06-253-0/+76
Major build system rewrite. New and exciting: 1. Proper dependency tracking. All source files including header files should be properly tracked and recompiled as necessary when they are changed. 2. Build-type tracking. If the target changes from 'ram' to 'flash,' for example, the build system will force a rebuild rather than incorrectly link modules to a different address. 3. New targets: The old 'ram,' 'flash,' and 'jtag' targets have been replaced with the environment variable MAPLE_TARGET, which controls the link address. Users can either export it to their environment, or pass MAPLE_TARGET on the command-line. Once this is set, sketches can be compiled with 'make sketch,' or simply 'make.' Note: the default is MAPLE_TARGET='flash.' The target 'install' now automagically uploads the sketch to the board using the appropriate method. The 'run' target has been renamed to 'debug.' It starts an openocd gdb server. 4. Odds and ends: -Verbose and 'quiet' modes. Set V=1 for verbose compilation, the default is quiet. -Object file sizes and disassembly information is generated and placed in build/$(BOARD).sizes and build/$(BOARD).disas, respectively. -Parallel make with -j should speed things up if you have multiple cores.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 14:17:08 +0000