aboutsummaryrefslogtreecommitdiffstats
path: root/support/ld
Commit message (Collapse)AuthorAgeFilesLines
* Tweak family-specific linker file layout.Marti Bolivar2012-04-111-0/+0
| | | | | | | | | | | | | Move support/ld/stm32/f1/performance/vector_symbols.inc to support/ld/stm32/family/f1/performance/vector_symbols.inc Creating directory "family" under support/ld/stm32 will allow parallel directories (e.g. support/ld/stm32/mcu) to exist, which allows an eventual linker script cleanup to go much more smoothly. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Fix linking and C runtime initialization on F1.Marti Bolivar2012-04-111-30/+23
| | | | | | | | | | | | Reorder the .data and .rodata sections in common.inc. This seems necessary to get the linker to place the data ROM disk and the pointer to it in the right places. Switch from long long to int in start_c.c. I have no idea why this helps, but it does. F1 will crash if you don't do this. It will probably slow things down unnecessarily on F2, but I don't care. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Remove "CS3" prefix from libmaple symbol names.Marti Bolivar2012-04-112-9/+9
| | | | | | | | | | | | | | | | | | | We're no longer even marginally compatible with CS3, so it's inappropriate to use that prefix in our names. Rename: __cs3_stm32_vector_table -> __stm32_vector_table. __cs3_stack -> __msp_init __cs3_reset -> __exc_reset __cs3_start_c -> start_c Also add an MIT license header and assert LeafLabs copyright over wirish/start.S and wirish/start_c.c. These files are modified from the original CodeSourcery versions, which were distributed under a license that permits modifications to be distributed under a different copyright and licensing terms than the originals. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Remove CS3-style initialization.Marti Bolivar2012-04-1120-528/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove libcs3-related bits from support/ld. Break them out into libmaple proper and Wirish as appropriate: vector table definition and ISR declarations go into libmaple proper, and startup code goes into Wirish. Vector table symbols are included into common.inc from an STM32 family-specific directory under support/ld/stm32. This is a combination of 5 commits. Individual commit messages follow: libcs3_stm32_src: Don't depend on cs3.h. So we can use the existing toolchain. Move ISR decls/vector table into libmaple proper. This allows us to configure the vector table on a per-family basis. - Move support/ld/libcs3_stm32_src/stm32_isrs.S stm32_vector_table.S to libmaple/stm32f1/isrs_performance.S vector_table_performance.S, respectively. The directory libmaple/stm32f1/ is intended to hold all STM32F1-specific code within libmaple. Obviously, there's a lot of work to do before this becomes true. - support/ld/libcs3_stm32_src/Makefile: Don't try to compile stm32_isrs.S and stm32_vector_table.S anymore. - Add libmaple/stm32f1/rules.mk to include these new files in the standard libmaple build. - support/make/target-config.mk: Add LIBMAPLE_MODULE_FAMILY, which selects a directory to use as a family-specific libmaple submodule. - Makefile: Add LIBMAPLE_MODULE_FAMILY to LIBMAPLE_MODULES. Remove support/ld/libcs3_stm32_src and derived object files. From support/ld/libcs3_stm32_src, move start.S and start_c.c into Wirish. Modify wirish/rules.mk accordingly. Delete support/ld/libcs3_stm32_*_density.a. These are no longer necessary, as the relevant objects are included in the standard Wirish build. Remove the GROUP statements from the board linker scripts accordingly. Remove SEARCH_DIR(.) from common.inc; it's no longer necessary. Also fix up some comments that are now out of date. wirish/start_c.c: Don't use CS3-style memory initialization. Switch memory initialization to a simpler style of initializing .data if necessary, then zeroing .bss. Initializing .data is only necessary during Flash builds, since during RAM builds, LOADADDR(.data) == ADDR(.data). This makes libmaple completely incompatible with the CS3 startup sequence. Subsequent commits will clean up the namespace to reflect that fact. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Make vector table symbols family-specific during linking.Marti Bolivar2011-11-152-4/+7
| | | | | | | | | | | | | | | | | - support/make/target-config.mk: add LD_FAMILY_PATH, the directory to search for STM32 family-specific link configuration files. For now, this is just a stub which points to support/ld/stm32/f1/performance, since that's all we currently support. We can add the logic to support different STM32 families here later. - Makefile: Pass -L $(LD_FAMILY_PATH) to linker. - Rename support/ld/names.inc to support/ld/stm32/f1/performance/vector_symbols.inc. - common.inc: INCLUDE vector_symbols.inc instead of names.inc. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Add support for the Olimex STM32 H103 board.David Kiliani2011-09-271-0/+1
| | | | | | | | Pin layout and header files for the STM32 H103 prototype board from Olimex featuring an STM32F103RBT6 chip. This commit contains all necessary changes to compile with BOARD=olimex_stm32_h103. Signed-off-by: David Kiliani <mail@davidkiliani.de>
* [support/ld] Unify linker scripts.Marti Bolivar2011-09-1315-248/+89
| | | | | | | | | | | | | | | | Add new common.inc, which is common_rom.inc with some DEFINED(_FLASH_BUILD) usages thrown in to allow for RAM builds. It also uses a new REGION_RODATA region alias for read-only data. Move section .USER_FLASH to REGION_RODATA. This means it lives in RAM under RAM builds. Although this might be surprising, not doing so would make RAM builds useless. Modify the individual board linker scripts to properly set REGION_RODATA and _FLASH_BUILD before calling out to common.inc. Delete common_rom.inc, common_ram.inc, common_header.inc, in favor of common.inc. This should fix RAM builds on all boards.
* [support/ld] Put Maple Native's heap on external SRAM chip.Marti Bolivar2011-09-123-0/+12
| | | | | | Specify _lm_heap_start and _lm_heap_end in Maple Native's linker scripts to point respectively to beginning and end of FSMC-mapped external SRAM chip addresses.
* [support/ld] Add linker support for reconfigurable heap.Marti Bolivar2011-09-122-2/+16
| | | | | | | | | | | | | | | - common_header.inc: Declare EXTERN symbols _lm_heap_start and _lm_heap_end. - common_rom.inc: Check for _lm_heap_start and _lm_heap_end. If they are defined, preserve their values. Otherwise, _lm_heap_start is starts after .bss, and _lm_heap_end is the end of SRAM. This allows existing linker scripts to continue using the old heap scheme, but allows for customizability elsewhere. - syscalls.c: Respect the addresses of _lm_heap_start and _lm_heap_end as the boundaries of the heap in _sbrk().
* common_rom.inc: More comments.Marti Bolivar2011-09-121-8/+20
| | | | Explain what's going on so unfamiliar readers have more hope.
* common_rom.inc: Eliminate apparently useless sections.Marti Bolivar2011-09-091-8/+0
|
* [support/ld] Rename vector table section.Marti Bolivar2011-09-094-5/+2
|
* Linker scripts: Remove useless junk.Marti Bolivar2011-09-092-16/+1
|
* Linker scripts: Rename section targets.Marti Bolivar2011-09-092-14/+5
| | | | | | Use region aliases in common_ram.inc, common_rom.inc. These are provided by the individual board scripts which include these. Note that the aliases have horrible names. We'll need to fix that up.
* Linker scripts: Indent common_ram.inc, common_rom.inc.Marti Bolivar2011-09-092-148/+149
|
* Tidy up linker scripts.Marti Bolivar2011-09-0712-27/+19
| | | | Comment/whitespace changes only.
* [support/ld] Factor out header from common_rom.inc, common_ram.inc.Marti Bolivar2011-09-073-73/+48
| | | | | | | The linker scripts share an initial section. Factor this out into a new file common_header.inc, and have the main linker scripts include this file. Apart from eliminating a redundancy, this will make it easier to add new linker scripts in the future.
* DMA: Fix non-working DMA interrupts.Marti Bolivar2011-06-201-7/+7
| | | | | | | | | | | | | | | | | | | | | | libmaple/dma.c defines DMA interrupts __irq_dma_channel[1-7], consistent with what is specified by support/ld/names.inc. However, names.inc is inconsistent with what support/ld/libcs3_stm32_src/ expects. Specifically, it contradicts the files - support/ld/libcs3_stm32_src/stm32_isrs.S - support/ld/libcs3_stm32_src/stm32_vector_table.S Which use the names __irq_dma1_channel[1-7]. Change names.inc and dma.c to use the correct IRQ names. The original names.inc/libcs3_stm32_src inconsistency was introduced in 43d6921658cd29b8022af4424d340a90fbcb9a7f, but dma.c had the correct names until ec3cf2903f4b03bc1dae5e159495c9e5ef0938ca, where they were renamed for consistency with names.inc. At that point, DMA interrupts stopped working. (This was documented in the commit message). Thanks to forum user robodude666 for tracking this down.
* Converting all files to UNIX newlines.Marti Bolivar2011-05-1015-752/+752
| | | | | | | Committing the results of running the following on the libmaple root directory: $ fromdos `grep --exclude-dir='[.]git' -Ilsr $'\r$' .`
* Maple RET6 edition supportMarti Bolivar2011-03-164-1/+53
|
* support: linker: Fix high density vector tablePerry Hung2011-03-152-17/+17
| | | | | | | Entries for high-density interrupt vectors were incorrectly declared to be .weak instead of .long. Thanks redfox74!
* Refactor linker scripts. Rename irq and exception handlers.Perry Hung2011-02-2722-1817/+1102
| | | | | Add common linker scripts for ram and rom. Add medium and high density libraries for libcs3.
* Function examples/test-session.cpp on NativeMarti Bolivar2011-02-102-3/+3
|
* maple mini runs blinky now.Marti Bolivar2010-10-223-0/+617
| | | | still need usb descriptors to improve, and also nothing else is tested.
* Fix maple linker memory map for jtag targetPerry Hung2010-09-161-2/+2
|
* board-specifc linker scriptsbnewbold2010-09-026-12/+617
|
* Portability fixesbnewbold2010-08-313-3/+15
| | | | Still not working but fixed a lot of merge errors
* Merge maple-native changes into portablebnewbold2010-08-313-3/+3
|\ | | | | | | This compiles for both maple and maple_native but is untested.
| * added libm.a to linker scripts to fix sqrt() bugbnewbold2010-08-193-3/+3
| | | | | | | | | | | | Fixes a bug noted by several users when using math functions like cos(), sqrt(), etc in the Maple IDE. This bug did not seem to affect Makefile compiles.
* | partial progress on FSMC for SRAMbnewbold2010-08-052-3/+3
| |
* | Some refactoringbnewbold2010-08-052-4/+4
|/
* fix botched merge from linker-refactorPerry Hung2010-05-287-0/+678
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 18:13:48 +0000