| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
HardwareTimer was removed from the build when the timer refactor was
done; this redoes it in terms of the new timer.h interface. A variety
of conflicting or badly designed bits were deprecated or removed.
I'm still not satisfied with this interface, as it's going to make
life difficult moving forward to high-density chips, where the
addition of basic timers means that the capture/compare methods won't
apply in some cases. However, we need to get 0.0.10 out the door, so
it'll have to do for now.
The docs are up to date, and contain a warning that the Wirish API
isn't stable and a recommendation to use libmaple proper.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Still a polling driver, but the libmaple proper interface exposes
enough that users enable the various interrupts and define their own
IRQ handlers if they feel like it.
Wirish HardwareSPI interface was largely redone; it's more like the
Arduino implementation now, although there are some differences when I
didn't like their API. The old methods are still there, but are
deprecated and slated for deletion in 0.1.0.
New board-specific values: BOARD_NR_SPI, BOARD_SPIx_NSS_PIN,
BOARD_SPIx_MOSI_PIN, BOARD_SPIx_MISO_PIN, and BOARD_SPIx_SCK_PIN, for
x from 1 to BOARD_NR_SPI.
Documentation was updated appropriately.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The vast majority of the Maple-specific values have been pulled out of
the higher-level overview pages and replaced with refs into documents
under /docs/source/hardware/.
Much of the work that's left to be done in this regard is labeled with
versioned TODO and FIXME comments.
Suggestions from StephenFromNYC and gbulmer were incorporated from
this forum thread:
http://forums.leaflabs.com/topic.php?id=703
|
| |
|
|
|
|
|
|
|
|
|
| |
- gpio.h: afio_mapr_swj_config() renamed afio_cfg_debug_ports()
- [new] wirish_debug.h: disableDebugPorts(), enableDebugPorts()
- Maple, Maple Native, and Maple RET6 PIN_MAPs are now larger by 5,
have mappings for the extra JTAG/SW pins.
Documentation was updated appropriately.
|
| |
|
|
| |
Blocking fixes for 0.0.10; other changes.
|
| |
|
|
| |
This reverts commit 8bd3cebbee62e2dd7e961b149cc8bb0e980eaf88.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Various board-specific #defines and arrays of pins added.
For the changelog (some of this information predates this commit):
* wirish/boards.h now declares the following arrays of pin numbers:
* boardPWMPins - PWM-capable pins
* boardADCPins - ADC-capable pins
* boardUsedPins - pins already in use, e.g. BOARD_BUTTON_PIN
It also declares a bool boardUsesPin(uint8 pin) function for
convenient testing of whether a pin is in use.
* wirish/boards/*.h now define:
* BOARD_USART1_TX_PIN
* BOARD_USART1_RX_PIN
* BOARD_USART2_TX_PIN
* BOARD_USART2_RX_PIN
* BOARD_USART3_TX_PIN
* BOARD_USART3_RX_PIN
* BOARD_NR_GPIO_PINS (renamed from NR_GPIO_PINS)
* BOARD_NR_USARTS (renamed from NR_USARTS)
* BOARD_NR_PWM_PINS
* BOARD_NR_ADC_PINS
* BOARD_NR_USED_PINS
* wirish/boards/maple_native.h now defines:
* BOARD_UART4_TX_PIN
* BOARD_UART4_RX_PIN
* BOARD_UART5_TX_PIN
* BOARD_UART5_RX_PIN
(Unfortunately, wirish/boards/maple_RET6.h cannot, since at least
one of the UART4/UART5 pins are used already; this will require layout
changes for a wide-release Maple form factor RET6 board).
* wirish/boards/*.cpp all include the corresponding array definitions.
They all live in flash by default, thanks to the new __FLASH__ macro
in wirish/wirish_types.h, which is a synonym for the existing __attr_flash
#define in libmaple/libmaple_types.h.
The documentation was updated to include this information. It also
gained various FIXME/TODO comments related to its generalization
across boards.
The quality assurance-related examples (examples/qa-slave-shield.cpp
and examples/test-session.cpp) now make heavy use of board-specific
values to ensure portability.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The old Print class couldn't print uint64 values, and featured
hand-hacked functionality better handled by snprintf(). Redid it
using snprintf(), using "[u]int[8,16,32,64]" types for more clarity,
and eliminated some private methods in favor of auxiliary functions in
Print.cpp.
Breaking compatibility with original implementation in three ways:
- Print::print(double) is now accurate to 6 digits, rather
than 2; this is consistent with the default behavior of the %f
format specifier, and if you're using floating point, it's slow
enough that you probably want the increased accuracy.
- The only bases you can print a number to are 2, 8, 10, and
16. 8, 10, and 16 already have format specifiers, and 2 is an
important special case; others complicate matters unnecessarily.
- Printing numbers in bases other than 10 treats them as
unsigned quantities (i.e., won't print '-' characters). This is
more consistent with C++'s behavior for hexadecimal and octal
literals (e.g., 0xFFFFFFFF has type uint32).
Updated HardwareSerial and USBSerial class documentation to reflect
the new behavior.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
