aboutsummaryrefslogtreecommitdiffstats
path: root/libmaple
Commit message (Collapse)AuthorAgeFilesLines
...
* stm32f1/rcc.c: Add cautionary comment.Marti Bolivar2012-04-111-0/+4
| | | | Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* RCC: Break out some portable functionality from stm32f1/.Marti Bolivar2012-04-114-34/+119
| | | | | | | | | | | | | Portions of rcc_clk_enable(), rcc_reset_dev(), and rcc_set_prescaler() are portable; break these into static inline helpers in rcc_private.h. These guts of these are portable, but the arrays of registers etc. are not. Also add an extern declaration for rcc_dev_table into rcc_private.h. This lets us put rcc_dev_clk() into a newly resurrected libmaple/rcc.c, since that's portable. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* libmaple: Add build infrastructure for private headers.Marti Bolivar2012-04-113-3/+4
| | | | | | | | | | | libmaple/rules.mk: Add LIBMAPLE_PRIVATE_INCLUDES, a place for storing headers which should be commonly available throughout libmaple, but not made public. Currently, this is just the libmaple directory. Add LIBMAPLE_PRIVATE_INCLUDES to the target flags in the STM32F1 and USB submodules. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Move GPIO support for STM32F1 to libmaple/stm32f1.Marti Bolivar2012-04-115-589/+676
| | | | | | | | | | | | | | | Make a new family header, libmaple/stm32f1/include/family/gpio.h, and supporting libmaple/stm32f1/gpio.c. Beyond registers and devices, these also include anything mentioning AFIO, which doesn't exist on F2. Update libmaple/stm32f1/rules.mk for new gpio.c. Alter gpio_write_bit() to use dev->regs->BSRR only. BRRs are not present on STM32F2. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* libmaple/nvic.c: Cosmetics.Marti Bolivar2012-04-111-11/+15
| | | | Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Move NVIC support for STM32F1 to libmaple/stm32f1.Marti Bolivar2012-04-112-111/+150
| | | | | | Backwards-compatible. Only the headers need to change. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Move Flash support for STM32F1 to libmaple/stm32f1/.Marti Bolivar2012-04-115-93/+181
| | | | | | | | | | | | | | | This is a backwards-compatible change. The Flash registers on the STM32F2 line are different than on STM32F1. Therefore, move the register map and bit definitions to new libmaple/stm32f1/include/family/flash.h. Move flash_enable_prefetch() from libmaple/flash.c to new libmaple/stm32f1/flash.c. The remaining pieces of libmaple/flash.c use a common subset of the Flash registers, so they're's portable to F2, and that's all we're currently interested in. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Move RCC support for STM32F1 to libmaple/stm32f1/.Marti Bolivar2012-04-115-518/+587
| | | | | | | | | | | | This is a backwards-compatible change. Modify libmaple/rules.mk to include the family's include directory. This allows libmaple/include/libmaple/rcc.h to include the STM32F1 RCC header with #include <family/rcc.h>. We'll use this convention henceforth to distinguish between top-level and family-specific headers. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* libmaple/rules.mk: Reinstate -Werror.Marti Bolivar2012-04-111-1/+1
| | | | | | This is OK across all boards now that USB is its own submodule. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Make USB its own submodule.Marti Bolivar2012-04-118-25/+54
| | | | | | | | | | | | | | | Add libmaple/usb/rules.mk, which compiles the USB FS device firmware submodule. Move the logic for compiling the USB stack from libmaple/rules.mk into libmaple/usb/rules.mk. Move libmaple/usb/usb_cdacm.h to libmaple/include/libmaple/. Its API is sufficiently general that we'll be able to port it over to USB OTG (either FS or HS) eventually, and that lets us include it from Wirish using the new style for libmaple headers. Fix the includes for public libmaple headers within libmaple/usb. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm.c: Fix warning for non-LeafLabs boards.Marti Bolivar2012-04-111-6/+2
| | | | Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Move public headers to include directories; related cleanups.Marti Bolivar2012-04-1148-223/+294
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move libmaple/*.h to (new) libmaple/include/libmaple/. The new accepted way to include a libmaple header foo.h is with: #include <libmaple/foo.h> This is more polite in terms of the include namespace. It also allows us to e.g. implement the Arduino SPI library at all (which has header SPI.h; providing it was previously impossible on case-insensitive filesystems due to libmaple's spi.h). Similarly for Wirish. The old include style (#include "header.h") is now deprecated. libmaple/*.h: - Change include guard #defines from _FOO_H_ to _LIBMAPLE_FOO_H_. - Add license headers where they're missing - Add conditional extern "C" { ... } blocks where they're missing (they aren't always necessary, but we might was well do it against the future, while we're at it.). - Change includes from #include "foo.h" to #include <libmaple/foo.h>. - Move includes after extern "C". - Remove extra trailing newlines Note that this doesn't include the headers under libmaple/usb/ or libmaple/usb/usb_lib. These will get fixed later. libmaple/*.c: - Change includes from #include "foo.h" to #include <libmaple/foo.h>. Makefile: - Add I$(LIBMAPLE_PATH)/include/libmaple to GLOBAL_FLAGS. This allows for users (including Wirish) to migrate their code, but should go away ASAP, since it slows down compilation. Wirish: - Move wirish/**/*.h to (new) wirish/include/wirish/. This ignores the USB headers, which, as usual, are getting handled after everything else. - Similarly generify wirish/boards/ structure. For each supported board "foo", move wirish/boards/foo.h and wirish/boards/foo.cpp to wirish/boards/foo/include/board/board.h and wirish/boards/foo/board.cpp, respectively. Also remove the #ifdef hacks around the .cpp files. - wirish/rules.mk: put wirish/boards/foo/include in the include path (and add wirish/boards/foo/board.cpp to the list of sources to be compiled). This allows saying: #include <board/board.h> instead of the hack currently in place. We can allow the user to override this setting later to make adding custom board definitions easier. - Disable -Werror in libmaple/rules.mk, as the current USB warnings don't let the olimex_stm32_h103 board compile. We can re-enable -Werror once we've moved the board-specific bits out of libmaple proper. libraries, examples: - Update includes accordingly. - Miscellaneous cosmetic fixups. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Remove "CS3" prefix from libmaple symbol names.Marti Bolivar2012-04-111-6/+6
| | | | | | | | | | | | | | | | | | | We're no longer even marginally compatible with CS3, so it's inappropriate to use that prefix in our names. Rename: __cs3_stm32_vector_table -> __stm32_vector_table. __cs3_stack -> __msp_init __cs3_reset -> __exc_reset __cs3_start_c -> start_c Also add an MIT license header and assert LeafLabs copyright over wirish/start.S and wirish/start_c.c. These files are modified from the original CodeSourcery versions, which were distributed under a license that permits modifications to be distributed under a different copyright and licensing terms than the originals. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Remove CS3-style initialization.Marti Bolivar2012-04-113-0/+348
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove libcs3-related bits from support/ld. Break them out into libmaple proper and Wirish as appropriate: vector table definition and ISR declarations go into libmaple proper, and startup code goes into Wirish. Vector table symbols are included into common.inc from an STM32 family-specific directory under support/ld/stm32. This is a combination of 5 commits. Individual commit messages follow: libcs3_stm32_src: Don't depend on cs3.h. So we can use the existing toolchain. Move ISR decls/vector table into libmaple proper. This allows us to configure the vector table on a per-family basis. - Move support/ld/libcs3_stm32_src/stm32_isrs.S stm32_vector_table.S to libmaple/stm32f1/isrs_performance.S vector_table_performance.S, respectively. The directory libmaple/stm32f1/ is intended to hold all STM32F1-specific code within libmaple. Obviously, there's a lot of work to do before this becomes true. - support/ld/libcs3_stm32_src/Makefile: Don't try to compile stm32_isrs.S and stm32_vector_table.S anymore. - Add libmaple/stm32f1/rules.mk to include these new files in the standard libmaple build. - support/make/target-config.mk: Add LIBMAPLE_MODULE_FAMILY, which selects a directory to use as a family-specific libmaple submodule. - Makefile: Add LIBMAPLE_MODULE_FAMILY to LIBMAPLE_MODULES. Remove support/ld/libcs3_stm32_src and derived object files. From support/ld/libcs3_stm32_src, move start.S and start_c.c into Wirish. Modify wirish/rules.mk accordingly. Delete support/ld/libcs3_stm32_*_density.a. These are no longer necessary, as the relevant objects are included in the standard Wirish build. Remove the GROUP statements from the board linker scripts accordingly. Remove SEARCH_DIR(.) from common.inc; it's no longer necessary. Also fix up some comments that are now out of date. wirish/start_c.c: Don't use CS3-style memory initialization. Switch memory initialization to a simpler style of initializing .data if necessary, then zeroing .bss. Initializing .data is only necessary during Flash builds, since during RAM builds, LOADADDR(.data) == ADDR(.data). This makes libmaple completely incompatible with the CS3 startup sequence. Subsequent commits will clean up the namespace to reflect that fact. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_descriptors.h: Remove usbVcomDescriptor[...] values.Marti Bolivar2011-10-211-7/+0
| | | | | | These are CDC ACM-specific. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_descriptors.h: Whitespace and column cleanups.Marti Bolivar2011-10-211-80/+80
| | | | | | Untabify, make (mostly) 80-column clean. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb: Rename descriptors.h -> usb_descriptors.h.Marti Bolivar2011-10-212-3/+3
| | | | | | Modify its include guard, and the files that include it, appropriately. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb.h: Move to libmaple/.Marti Bolivar2011-10-211-0/+0
| | | | | | | | | | | Apart from having an unstable API, usb.h is now a fairly good citizen of libmaple, so move it to live with the rest of the libmaple headers. Its device struct is still "struct usblib_dev". Leave that there; the asymmetry with the rest of the library is a good reminder that the API isn't really on equal footing with the rest of the library. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* USB: API cleanups.Marti Bolivar2011-10-213-23/+22
| | | | | | | | | | Modify usb.h functions (changing their names in some cases) to also take a usblib_dev* argument, to fit in better with the rest of libmaple. Store an rcc_clk_id in struct usblib_dev for the same reason. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* USB: API cleanups.Marti Bolivar2011-10-213-39/+31
| | | | | | | | | | | | | | Remove usbSuspend(), usbResumeInit(), usbResume(), the USB low-priority IRQ, and usbWaitReset() from usb.h. Also remove RESUME_STATE since it was only there for usbResume(). These functions don't need to be seen by anybody except for usb.c and usb_cdcacm.c, so move them there (altering their names to fit with libmaple style guidelines) and mark them static. Clean up includes in usb.c while we're there. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb.h: Mark API unstable.Marti Bolivar2011-10-211-0/+4
| | | | | | | | The USB API is heavily reliant on the ST stack, and additionally assumes that all USB is the USB FS peripheral. As such, it's going to have to change as we go forward. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Oops; actually remove usb_config.h.Marti Bolivar2011-10-181-45/+0
| | | | | | | | usb_config.h was supposed to be removed in d7afdbe6b41a77938863854a1e719398e6c35094; however, it looks like some merge conflicts stopped that from happening while I was rebasing. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm.c: CleanupsMarti Bolivar2011-10-181-200/+202
| | | | | | | | | Move the callbacks to the bottom of the file, and mark them static. Replace empty callbacks with NOP_Process in the callback tables. Remove prototype for nonexistent prep_and_reset(). Other miscellaneous fixups. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb.h, usb.c: CleanupsMarti Bolivar2011-10-182-22/+18
| | | | | | | | | Remove wIstr. This cleans up the control flow. wIstr is still declared in usb_lib/usb_regs.h, but it's unused throughout the code base. Remove bIntPackSOF. Only written, never read. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Remove usb_int.h, usb_int.h, usb_int.c.Marti Bolivar2011-10-184-235/+0
| | | | | | No longer used. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb: Clean up some globals with new struct usblib_dev.Marti Bolivar2011-10-184-79/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add struct usblib_dev (and USBLIB, a pointer to the singleton) to usb.h. USBLIB contains the global state which is used by functionality imported from usb_lib/. Consolidating global state into USBLIB will make it easier to remove later. Initial fields in struct usblib_dev are endpoint interrupt callbacks, a mask for what to handle in the low-priority USB interrupt, and device state. These replace pEpInt_IN, pEpInt_OUT; wInterrupt_Mask; and bDeviceState, respectively from usb_lib/, so remove their declarations from usb_lib_globals.h accordingly. Also remove unused SaveState declaration from usblib_globals.h. Move bDeviceState into 'state' field in usblib_dev. Device state type changes from DEVICE_STATE to usb_dev_state, volatile gets dropped, and enumerators get a 'USB_' prefix, but it's otherwise the same. usb_lib/ expects pInformation to point to Device_Info, pUser_Standard_Requests -> User_Standard_Requests, and pProperty -> Device_Property. Alter usb_init_usblib() to reflect these assumptions. Reorganize usb_lib_globals.h to make these assumptions more apparent to the reader. Modify usb_init_usblib() to take endpoint callbacks as arguments; update its caller in usb_cdcacm.c. usb_lib/ defines pInformation, pProperty, and pUser_Standard_Requests itself (in usb_init.c), but we have our own definitions (in usb.c). Remove the duplicates from usb.c. Also remove EPindex and Device_Info definitions from usb.c. Unused, and anyways already defined in usb_lib/usb_init.c. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Remove usb_config.h.Marti Bolivar2011-10-183-17/+28
| | | | | | Move its defines into usb_cdcacm.c and usb.[hc] as appropriate. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb: Disentangle CDC ACM functionality.Marti Bolivar2011-10-1813-884/+881
| | | | | | | | | | | | | | | | | | | | | Add new usb_cdcacm.h, which provides the virtual serial port API. This file (and new usb_cdcacm.c) consolidate the VCOM support, which was previously distributed through descriptors.[hc], usb.[hc], usb_callbacks.[hc], and usb_config.h. Add usb_init_usblib() to usb.h, as a way of initializing the USB peripheral in terms of the data structures required by usb_lib. This is used by the new usb_cdcacm_enable(). Create new usb_lib_globals.h, with declarations for the usb_lib global state which is most used throughout the rest of the libmaple USB stack. Remove descriptors.c and usb_callbacks.[hc]; they are no longer necessary. Update the USB README accordingly. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb.c: Use usb_reg_map.h; replace most of CTR_LP().Marti Bolivar2011-10-181-90/+244
| | | | | | This cuts down on some of the uglier dependencies. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb: Remove usbPowerOff(), move usbPowerOn() to usb_callbacks.c.Marti Bolivar2011-10-183-31/+15
| | | | | | | | | | | Remove usbPowerOn(), usbPowerOff() prototypes from usb.h. These aren't used outside of the USB subsystem, so they don't belong here. Move usbPowerOn() from usb.c to usb_callbacks.c. This is the only place where it's used. Remove the unused usbPowerOff() (from usb.c) altogether. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb: Prepare for moving some files to usb_reg_map.h.Marti Bolivar2011-10-184-21/+39
| | | | | | | | | | | | | usb_config.h: Remove usb_regs.h dependency; fix includes; add license. usb_callbacks.h: Change includes to the pieces of usb_lib/ it uses, which doesn't include usb_regs.h. descriptors.h: Remove unused usb_lib.h include. usb.h: Remove unused usb_lib.h include. Some cosmetic commenting. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Add usb_reg_map.h and usb_reg_map.c.Marti Bolivar2011-10-183-0/+513
| | | | | | | | | | | usb_reg_map.h contains the usual register map and register bit definitions that libmaple convention requires. It also contains a variety of structs and convenience functions for accessing and manipulating endpoint registers, BTABLE entries, and PMA buffers. We'll be moving towards usb_reg_map.h instead of usb_lib/usb_regs.h. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb: Update README file.Marti Bolivar2011-10-181-20/+1
| | | | | | Various parts of it are no longer true, and some TODOs are now done. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Remove usb_hardware.c and usb_hardware.h.Marti Bolivar2011-10-185-221/+6
| | | | | | | These files contain a lot of duplicated and unused code. Move the relevant pieces that need to survive into usb.c and usb_callbacks.c. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb: Replace duplicated code with nvic.h API.Marti Bolivar2011-10-185-58/+19
| | | | | | | | | Replace calls to usbEnbISR()/usbDsbISR() with nvic_irq_enable()/nvic_irq_disable(). Remove ST-style code. Use nvic_sys_reset() instead of systemHardReset(). Rename some conflicting #defines that including nvic.h created. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb: Cleanups and renames.Marti Bolivar2011-10-182-21/+4
| | | | | | | | | Rename setupUSB() and disableUSB() to usb_cdcacm_enable() and usb_cdcacm_disable(), respectively. Remove usbSendHello(). This shouldn't exist. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb: Move some board-specific configuration to Wirish.Marti Bolivar2011-10-183-39/+18
| | | | | | | | | Create new BOARD_USB_DISC_DEV and BOARD_USB_DISC_BIT board-specific values. Use these as arguments to setupUSB() and disableUSB(). This helps make the USB stack more generic, and goes towards the resolution of an important FIXME. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* timer.h: fix timer_oc_set_mode().Marti Bolivar2011-10-121-4/+2
| | | | | | | | | timer_oc_set_mode() incorrectly writes to CCMR1 when channel is 2; fix this. Thanks to ala42 for the fix. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usart: Add usart_rx().Marti Bolivar2011-10-072-0/+17
| | | | | usart_rx() is a nonblocking USART receive. Add it for symmetry with usart_tx().
* Add support for the Olimex STM32 H103 board.David Kiliani2011-09-271-0/+6
| | | | | | | | Pin layout and header files for the STM32 H103 prototype board from Olimex featuring an STM32F103RBT6 chip. This commit contains all necessary changes to compile with BOARD=olimex_stm32_h103. Signed-off-by: David Kiliani <mail@davidkiliani.de>
* rcc: Add RCC_USB to rcc_clk_id/rcc_dev_table.Marti Bolivar2011-09-242-0/+2
| | | | Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* nvic: Add nvic_sys_reset().Marti Bolivar2011-09-242-1/+14
| | | | | | This uses the SCB_AIRCR register to force a system reset. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* scb.h: Fix register map and bit definitions.Marti Bolivar2011-09-241-4/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the change log: This commit breaks backwards compatibility with 0.0.12. However, it appears that the previous version was incorrect, so these changes are necessary. The SCB register map type (scb_reg_map) appears to be adapted from versions specified by ARM; these include every possible register, and do not necessarily apply to the STM32, since some registers are implementation defined, to the extent that the implementation is allowed not to feature them at all. Thus, the current definition appears to be an overreach, since libmaple is STM32-specific. We should thus revise it based on ST's PM0056, where the STM32 SCB is specified. However, the ST docs appear to be buggy. In particular, they appear to contradict requirements made by ARM v7-M ARM with respect to the debug fault status register (DFSR), which ARM says must exist, but ST fails to specify (it does leave a DFSR-sized hole in the SCB memory layout, conveniently located next to some obvious typos which suggest that the section was not well-proofread). We defer to ARM and assume ST just forgot to document the register, and leave the DFSR field in struct scb_reg_map, since (based on my reading) its absence would be a silicon bug. All of the registers appearing in memory addresses higher than that of SCB_BFAR are not specified by ST, but the v7-M ARM appears to give some latitude on this to the implementation. Leave them in the source text, but put them in an appropriately-commented #if 0 block so that users who know they're there can yell at us if they find them missing. In this block, the Auxiliary Feature Register's field was "ADR" instead of "AFR" in struct scb_reg_map; fix this. Register bit definitions have been added which are named based on PM0056 when possible, and on the November 2010 "Derrata 2010_Q3" issue of the ARM v7-M Architecture Reference Manual, in the case of the DFSR. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Merge remote branch 'rryan/usb_fixes'Marti Bolivar2011-09-204-156/+90
|\
| * Missed one hard-coded structure size.RJ Ryan2011-09-181-1/+1
| | | | | | | | Signed-off-by: RJ Ryan <rryan@mit.edu>
| * Fix memory alignment of USB descriptor structures.RJ Ryan2011-09-183-155/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A variety of USB descriptor structures have been manually "unpacked". Instead of using the struct, their members were unpacked into the struct they were nested in. Additionally sizeof()'s were commented in favor of manual calculation of structure sizes. After uncommenting these changes, the USB CDC peripheral stopped correctly configuring with the host. The root problem with the structures is that GCC is padding them. By applying __attribute__((__packed__)), these problems are fixed. I removed all the instances of the workaround I saw within the USB code. Signed-off-by: RJ Ryan <rryan@mit.edu>
* | Add a libc abort() implementation.RJ Ryan2011-09-161-5/+28
| | | | | | | | | | | | | | | | | | | | | | The STL in particular relies on abort() for entering an error state. Without an abort() definition, the use of many STL primitives results in a link error because the default implementation of abort() uses _kill, _exit, and _getpid -- none of which are present. My abort() implementation writes an error message to the error USART and enters the throbbing-LED error state. Signed-off-by: RJ Ryan <rryan@mit.edu>
* | Add an __assert_func assertion handler so that libc does not use itsRJ Ryan2011-09-161-0/+9
|/ | | | | | | default implementation. This allows the use of assert() from libc's assert.h. Signed-off-by: RJ Ryan <rryan@mit.edu>
* Added more doxygen file level headers. Documented a few more functions.Michael Hope2011-09-1315-4/+68
| | | | Signed-off-by: Michael Hope <michaelh@juju.net.nz>
* syscalls.c: Allow environment to specify heap boundaries.Marti Bolivar2011-09-121-6/+12
| | | | | | Rename HEAP_START/HEAP_END macros CONFIG_HEAP_START/CONFIG_HEAP_END, to mark them as build-time configuration options. Wrap their definitions with #ifndefs appropriately.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 19:14:47 +0000