aboutsummaryrefslogtreecommitdiffstats
path: root/libmaple/usb/stm32f1/usb_cdcacm.c
Commit message (Collapse)AuthorAgeFilesLines
* usb_cdcacm: Reset transmitting flag in usbReset().Marti Bolivar2013-04-151-0/+1
| | | | | | Thanks to Manuel Odenahl for the fix. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: Make USB lib globals weak symbols.Marti Bolivar2013-01-181-3/+6
| | | | | | This allows users to override them. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm.c: Fixups for usb_cdcacm_tx().Marti Bolivar2013-01-171-11/+8
| | | | | | | | | | | | | - Check if we're transmitting (instead of how many bytes are left untransmitted) before bailing, in case we're transmitting a zero-length packet. - Set transmitting=1 before setting the endpoint valid to avoid races with the USB interrupt. - Eliminate some duplicated code. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Handle sending 0 byte packets.Manuel Odendahl2013-01-171-6/+15
| | | | | | | | Added a flag to see if we are currently waiting on an interrupt to acknowledge the sending of the current IN packet. Added a method usb_cdcacm_is_transmitting() to check for that flag. Signed-off-by: Manuel Odendahl <wesen@ruinwesen.com>
* Move endpoint definitions to include files (they are now needed outside in ↵Manuel Odendahl2013-01-171-21/+0
| | | | | | usb_serial.cpp) Signed-off-by: Manuel Odendahl <wesen@ruinwesen.com>
* usb_cdcacm.c: reenable the endpoint if an empty bulk transfer was received.Manuel Odendahl2012-11-081-0/+7
| | | | | | It is possible to receive empty bulk transfers. This would lead to the endpoint never being reenabled as this was handled by the read routine. This caused the USB to hang. Signed-off-by: Manuel Odendahl <wesen@ruinwesen.com>
* usb_cdcacm.c: Fix up descriptor definitions.Marti Bolivar2012-08-041-39/+25
| | | | Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Move contents of usb_descriptors.h to <libmaple/usb.h>.Marti Bolivar2012-08-041-1/+0
| | | | | | | | These form and name of structs etc. is basically determined by the USB spec and the libmaple style guide, so there's little reason for them to change, and less reason for them to stay hidden. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Prep usb_descriptors.h for removal.Marti Bolivar2012-08-041-22/+22
| | | | | | | | | | | | Just change names and things to fit the libmaple style. Its contents will move to the top-level <libmaple/usb.h> header next. This API is still unstable, but we need to expose pieces of it in order to get the Maple-specific pieces of usb_cdcacm.c into Wirish. Adjust uses of the API appropriately. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: Remove unused/redundant variables.Marti Bolivar2012-08-041-11/+3
| | | | Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: Expose line coding state.Marti Bolivar2012-08-041-22/+28
| | | | | | | This was already supported, so just move the line coding structure to the header and add some functions for accessing the current values. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: Set endpoint to NAK before checking byte count.Marti Bolivar2012-08-041-4/+4
| | | | | | Fixes an (admittedly very unlikely) race condition. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: various fixups.Marti Bolivar2012-08-041-39/+60
| | | | | | | | | | Mark internal state static. Properly reset the RX/TX state on USB reset. Choose better names for countTx and newBytes. Move the exposed configuration back into the .c; this information is not beneficial to hooks. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: Improve write speed.Marti Bolivar2012-08-031-4/+3
| | | | | | | | | Actually fill the TX buffer in the packet memory area, so we can send more bytes per transaction. Using the test-session benchmark, we're now clocking in the high 700KB/sec range via PySerial. With screen, rate is now about 550 KB/sec. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: CosmeticsMarti Bolivar2012-08-031-1/+1
| | | | Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: minor fixups.Marti Bolivar2012-08-031-17/+41
| | | | | | | | | | Rename USB_Line_Coding to usb_line_coding, and rename its fields to match the spec to aid searches. Alter the line_coding global to match, fixing an incorrect comment and avoiding magic numbers. Other minor fixups and comment improvements. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: Rename "notification" -> "management".Marti Bolivar2012-08-011-7/+7
| | | | | | This keeps things in line with the specification, helping readability. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Move CDC ACM config. descriptor into usb_cdcacm.c.Marti Bolivar2012-07-311-2/+15
| | | | Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Move bootloader reset signal detection to Wirish.Marti Bolivar2012-07-311-126/+24
| | | | | | | | Use usb_cdcacm hooks to move the DTR edge and "1EAF" magic packet detection to usb_serial.cpp. We'll later be able to extend this system to support Leonardo-style reset signalling. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: Add usb_cdcacm_peek().Marti Bolivar2012-07-311-27/+38
| | | | | | | | | | | We need this so the bootloader reset signal detector can look ahead in the byte stream without stealing bytes from the user when "1EAF" isn't received. While we're doing this, take the time to fix a bunch of RX-related code (dead code removal, adding volatile, etc.) Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdacm: Use config instead of magic numbers.Marti Bolivar2012-07-311-2/+2
| | | | | | Sigh. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: Add hook system.Marti Bolivar2012-07-311-0/+31
| | | | | | | | Provide hooks so users can reach into the CDC ACM callbacks with their own code. We'll use this to move the bootloader reset signals to Wirish. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm: Expose some internal configuration and values.Marti Bolivar2012-07-311-84/+51
| | | | | | | | | Mark the API as unstable so people don't rely on these too hard. (This header is not part of the official libmaple docs). We'll need some of this configuration elsewhere later, and it doesn't make much sense to expose it piecemeal. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm.c: Add another verification TODO.Marti Bolivar2012-07-311-0/+2
| | | | | | | Not sure what the comment above the new TODO is supposed to mean, but it looks like something that should be checked. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* usb_cdcacm.c: Resolve TODO and improve comments.Marti Bolivar2012-07-311-5/+7
| | | | | | | | | The disc pin code was copy-pasted when the CDC ACM pieces were extracted from the rest of the USB code, and I didn't really understand what was going on when I moved it over. Having checked the spec, the comments can be safely improved. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Doxygen hacks and fixups.Marti Bolivar2012-06-281-1/+1
| | | | | | | | - Shut Doxygen up in various places - Fix some genuine docs bugs - Ignore sources we're not responsible for Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
* Slightly improve and generify the USB infrastructure.Marti Bolivar2012-06-031-0/+762
The good news is that <libmaple/usb.h> and <libmaple/usb_cdcacm.h> did turn out generic enough in what they specify to go on unchanged. However, we can't just go on assuming that there's USB just because we're on an F1. Now that there's value line in the tree, we need to be more careful (value line F1s don't have USB peripherals). To that end, make all the F1 board-includes/*.mk files specify what line their MCU is with an MCU_F1_LINE variable. Use that to hack libmaple/usb/rules.mk so we only try to build the USB module under appropriate circumstances. While we're at it, add a vector_symbols.inc for value line MCUs under support/ld/. We need this to get the target-config.mk modifications implied by the addition of MCU_F1_LINE. We'll fix up some other performance-line-isms under libmaple/stm32f1 in a separate commit. Also in libmaple/usb/: - Move everything into a new stm32f1 directory. Due to aforementioned rules.mk hacks, there is no immediate need for an stm32f2 directory (USB support doesn't exist there). - Update the README for style and content. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 03:03:07 +0000