| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix copy-paste errors in, and add missing, register bit
definitions. For copy-paste errors that would result in source
incompatibilities with past releases, add some legacy defines.
Add series header and C file for STM32F1 which fills in the missing
API. Much of the F1 timer.c would be repeated on F2, so also add
timer_private.h to hold these.
Support for timers 9 through 14 is still missing.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Standard refactoring: add series headers for F1 and F2, along with
series adc.c files. There are some issues relating to adc_extsel_event
to hammer out later, but this will do for now.
We also add some new portability interfaces to libmaple/adc.h in order
for Wirish to use the same code to initialize the ADCs at init() time.
As usual, F1 is untested.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
| |
Alphabetize targets and remove continuation lines.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
|
| |
fsmc_sram_init_gpios() is now series-specific, so move its existing
implementation to the F1 backend, and add libmaple/stm32f2/fsmc.c for
the F2 backend.
Delete libmaple/fsmc.c; it is now empty.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
FIXME:
- Test F1 support
- Solve problem of duplicated bytes being TXed unless delay is
inserted after configuration but before first bytes are TXed.
Rip out nonportable bits from top-level interfaces. The USART register
maps are basically the same between F1 and F2, so leave these, but add
register bit definitions which had name changes to the libmaple header
to avoid needless repetition. There are also a few new bits in the F2
USART registers; add definitions for these in the F2 USART header. Add
Doxygen comments for all USART bit definitions.
Deprecate struct usart_dev's max_baud field. This is just bloat that
doesn't bring us much real benefit.
Add new series-specific USART files for F1 and F2:
- libmaple/stm32f[1,2]/usart.c
- libmaple/stm32f[1,2]/include/series/usart.h
These are standard series-specific files, providing register map base
pointers, defining devices, implementing nonportable routines, etc.
We need a portable way to configure the USART GPIOs. To this end, add
usart_async_gpio_cfg() to the top-level USART interface. This function
is implemented in new F1 and F2 USART backends to take the appropriate
action to configure the RX and TX pins for asynchronous full duplex
mode.
USART baud rate calculation is done differently on the different
series. Keep the usart_set_baud_rate() declaration in the top-level
USART header, but move the implementations into the series-specific
usart.c files.
In usart_set_baud_rate(), allow for deriving clock_speed automatically
by letting user tell us to figure out the peripheral clock speed by
mapping the device's rcc_clk_id onto an STM32_PCLK[1,2] value. This
preserves flexibility for users with non-default clock configurations,
but makes things easier on everyone else.
Add private USART files for portable private USART routines:
- libmaple/usart_private.h
- libmaple/usart_private.c
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Make a single function, flash_enable_features(), to control the access
characteristics of Flash memory (i.e. to write to the non-latency bits
of ACR).
In so doing, make everybody pretend to allow instruction and data
caching. On STM32F1, trying to turn these on simply has no
effect. This allows unconditionally trying to turn them on, which will
simplify users' lives.
This has the ancillary benefit of making the stm32f2- and
stm32f1-specific flash.c files unnecessary; delete these.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
| |
- libmaple/bkp.h: Mark availability restriction.
- Move libmaple/bkp.c to libmaple/stm32f1; adjust rules.mk files
accordingly.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
libmaple/rules.mk: Add LIBMAPLE_PRIVATE_INCLUDES, a place for storing
headers which should be commonly available throughout libmaple, but
not made public. Currently, this is just the libmaple directory.
Add LIBMAPLE_PRIVATE_INCLUDES to the target flags in the STM32F1 and
USB submodules.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Make a new family header, libmaple/stm32f1/include/family/gpio.h, and
supporting libmaple/stm32f1/gpio.c.
Beyond registers and devices, these also include anything mentioning
AFIO, which doesn't exist on F2.
Update libmaple/stm32f1/rules.mk for new gpio.c.
Alter gpio_write_bit() to use dev->regs->BSRR only. BRRs are not
present on STM32F2.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a backwards-compatible change.
The Flash registers on the STM32F2 line are different than on
STM32F1. Therefore, move the register map and bit definitions to new
libmaple/stm32f1/include/family/flash.h.
Move flash_enable_prefetch() from libmaple/flash.c to new
libmaple/stm32f1/flash.c. The remaining pieces of libmaple/flash.c use
a common subset of the Flash registers, so they're's portable to F2,
and that's all we're currently interested in.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This is a backwards-compatible change.
Modify libmaple/rules.mk to include the family's include
directory. This allows libmaple/include/libmaple/rcc.h to include the
STM32F1 RCC header with #include <family/rcc.h>. We'll use this
convention henceforth to distinguish between top-level and
family-specific headers.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
Remove libcs3-related bits from support/ld. Break them out into
libmaple proper and Wirish as appropriate: vector table definition and
ISR declarations go into libmaple proper, and startup code goes into
Wirish. Vector table symbols are included into common.inc from an
STM32 family-specific directory under support/ld/stm32.
This is a combination of 5 commits. Individual commit messages follow:
libcs3_stm32_src: Don't depend on cs3.h.
So we can use the existing toolchain.
Move ISR decls/vector table into libmaple proper.
This allows us to configure the vector table on a per-family basis.
- Move
support/ld/libcs3_stm32_src/stm32_isrs.S
stm32_vector_table.S
to
libmaple/stm32f1/isrs_performance.S
vector_table_performance.S,
respectively.
The directory libmaple/stm32f1/ is intended to hold all
STM32F1-specific code within libmaple. Obviously, there's a lot of
work to do before this becomes true.
- support/ld/libcs3_stm32_src/Makefile: Don't try to compile
stm32_isrs.S and stm32_vector_table.S anymore.
- Add libmaple/stm32f1/rules.mk to include these new files in the
standard libmaple build.
- support/make/target-config.mk: Add LIBMAPLE_MODULE_FAMILY, which
selects a directory to use as a family-specific libmaple
submodule.
- Makefile: Add LIBMAPLE_MODULE_FAMILY to LIBMAPLE_MODULES.
Remove support/ld/libcs3_stm32_src and derived object files.
From support/ld/libcs3_stm32_src, move start.S and start_c.c into
Wirish. Modify wirish/rules.mk accordingly.
Delete support/ld/libcs3_stm32_*_density.a. These are no longer
necessary, as the relevant objects are included in the standard Wirish
build. Remove the GROUP statements from the board linker scripts
accordingly.
Remove SEARCH_DIR(.) from common.inc; it's no longer necessary. Also
fix up some comments that are now out of date.
wirish/start_c.c: Don't use CS3-style memory initialization.
Switch memory initialization to a simpler style of initializing .data
if necessary, then zeroing .bss. Initializing .data is only necessary
during Flash builds, since during RAM builds, LOADADDR(.data) ==
ADDR(.data).
This makes libmaple completely incompatible with the CS3 startup
sequence. Subsequent commits will clean up the namespace to reflect
that fact.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
