| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Many of the #defines in libmaple.h were board-specific, not
MCU-specific. Most of these were only used by code under
libmaple/usb/. These were moved into usb_config.h, and are clearly
marked as being terrible hacks. I'm going to treat the USB stack as a
black box that we'll deal with later.
Further, instead of having a variety of #defines like "How many USARTS
do I have?", we decide that based on the density of the chip. This is
determined by testing for STM32_MEDIUM_DENSITY or STM32_HIGH_DENSITY
defines. libmaple currently doesn't support low-density chips, so
that suffices. The Makefile will set these automatically based on the
MCU.
Other offending #defines are ERROR_LED_PORT and ERROR_LED_PIN; these
were made optional, but they're set in the Makefile as a hack to keep
things working.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Extend the wirish attachInterrupt() and detachInterrupt() interface to
work with all GPIOs.
Note: The STM32 external interrupt lines are multiplexed between GPIO
ports. While any GPIO can be used as an external interrupt, not all of
them can be used at the same time. Each EXTI[n] line selects between
PA[n], PB[n], PC[n], etc. For example, line EXTI5 can be used with STM32
pins PA5, PB5, or PC5, but not all at the same time. See table:
EXTI Line Maple Pin STM32 Pin
0 D2 PA0
0 D27 PB0
0 D15 PC0
1 D3 PA1
1 D28 PB1
1 D16 PC1
2 D1 PA2
2 D17 PC2
2 D25 PD2
3 D0 PA3
3 D18 PC3
4 D10 PA4
4 D19 PC4
5 D13 PA5
5 D4 PB5
5 D20 PC5
6 D12 PA6
6 D5 PB6
6 D35 PC6
7 D11 PA7
7 D9 PB7
7 D36 PC7
8 D6 PA8
8 D14 PB8
8 D37 PC8
9 D7 PA9
9 D24 PB9
9 D38 PC9 (BUT)
10 D8 PA10
10 D29 PB10
10 D26 PC10
11 D30 PB11
12 D31 PB12
13 D32 PB13
13 D21 PC13
14 D33 PB14
14 D22 PC14
15 D34 PB15
15 D23 PC15
|
| |
|
|
|
|
|
|
|
| |
Initial commit of a polling-based SPI driver. The driver is limited to
synchronous, blocking sends and a 8-bit data frame format. Tested on
SPI1 and SPI2.
Other peripherals are temporarily disabled, and the rx function
is untested until I find a good peripheral to test everything on.
|
| |
|
|
|
|
| |
Relicensed the bulk of libmaple under the more permissive MIT License,
from GPLv3. Files that were largely or entirely derived from
the Arduino, STM, or Lanchon retain their original licenses.
|
|
|
copy-to-ide and Makefile updated to conform; .gitignore added;
LICENSE added
|
