| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Callbacks can be called after each read/write cycle or per byte
- Each I2C module can have different callbacks
- General call support also working
- Supports master and slave at same time. Also works with multimaster
Usage:
i2c_msg msg;
char buffer[255];
main()
{
i2c_slave_enable(I2C1, I2C_FAST_MODE | I2C_SLAVE_DUAL_ADDRESS | I2C_SLAVE_GENERAL_CALL | I2C_SLAVE_USE_RX_BUFFER); // init slave mode. Enables master too
i2c_slave_attach_recv_handler(I2C1, pmsg, funcrx); // attach receive handler
i2c_slave_attach_transmit_handler(I2C1, pmsg, functx); // attach transmit handler
i2c_slave_set_own_address(I2C1, 0x10); // set addresss 1
i2c_slave_set_own_address2(I2C1, 0x20); // set addresss 2
}
void funcrx(i2c_msg *msg)
{
printf("length is %d.\n", msg->length);
char return_data = msg0>data[0];
}
void functx(i2c_msg *dev)
{
msg->data[0] = 0x01;
msg->data[1] = 0x02;
msg->data[2] = 0x03;
msg->data[3] = 0x04;
msg->data[4] = 0x05;
msg->length = 5;
}
All code derived from datasheets and libmaple.
Signed-off-by:- Barry Carter <barry.carter@gmail.com>
|
|
|
|
| |
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
|
|
| |
This is ad-hoc and nonportable. If you really want I2C mapped
elsewhere, then mess with the I2C device fields and call afio_remap()
yourself. (This is also cleaner for F2).
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
|
|
|
| |
The IRQ priority hack is unnecessary on targets with properly
functioning I2C IRQ handlers, so we shouldn't use it unless we have
to. Add a mechanism so a series header can provide such a hack if
necessary. Have the F1 series header use this mechanism.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
| |
These are necessary to pull out some calls to gpio_set_mode().
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
|
| |
Existing Doxygen was commenting I2C_IRQ_ERROR instead of
i2c_enable_irq(), as desired.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
| |
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
| |
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
|
|
| |
I'm not sure these functions should even exist in their present form,,
but I don't understand the code well enough to make a real fix. For
now, just replace references to RM0008 with "chip reference manual".
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
i2c_set_input_clk()'s documentation says that the maximum peripheral
clock frequency is 36 MHz, but that's a hard-coded magic number. The
actual limit is the device's APB frequency or 46 MHz, whichever is
lower (F2 and F4 share the 46 MHz limit).
Fix the documentation to reflect that fact, and add an internal
series-provided function to get the maximum clock frequency for a
device. To help users porting to F2, have i2c_set_input_clk()
assert-check that the provided frequency is less than that maximum
value and the hard 46 MHz limit.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
|
| |
This is necessary to add series-specific infrastructure to clean up
some F1-isms in <libmaple/i2c.h>'s inline functions.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
| |
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Bring back <libmaple/i2c.h> support on STM32F1 with a view towards how
it'll be implemented on STM32F2. There are still many F1-isms in
libmaple/i2c.c and <libmaple/i2c.h>, to be dealt with subsequently.
Move device declarations and base pointer definitions to a new F1
<series/i2c.h>. The register maps and bit definitions themselves are
identical on both series, so leave them in the libmaple header.
Add i2c_private.h, which contains:
- I2C_DEV(), a convenience macro for defining an i2c_dev, and
- declarations for the event and error IRQ handlers.
The IRQ handlers are large, and I2C is slow anyway, so I see no reason
to make them inline in the private header (as we do for some other
peripherals). We just expose the existing ones that were formerly
static in libmaple/i2c.c, but prefix the names with underscore.
Move the device declarations and IRQ handlers into new
stm32f1/i2c.c. These use the i2c_private.h API.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
| |
Put CCR definitions after SR2, to keep them in register map order.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
|
| |
Reorder register bit definitions by descending bit number, for
consistency with the rest of the library.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
| |
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
| |
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
| |
The existing value clobbers the entire register.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
| |
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
| |
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix @file in many places. Also fix up the descriptions where it's
appropriate. This standardizes the @file formatting across the library
to explicitly include any parent directories up to the repository
root.
Besides being nice, this will hopefully let us manage Doxygen's XML
output so as to make extracting series-specific pieces via Breathe in
the leaflabs-docs repo possible.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
|
| |
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
Move libmaple/*.h to (new) libmaple/include/libmaple/. The new
accepted way to include a libmaple header foo.h is with:
#include <libmaple/foo.h>
This is more polite in terms of the include namespace. It also allows
us to e.g. implement the Arduino SPI library at all (which has header
SPI.h; providing it was previously impossible on case-insensitive
filesystems due to libmaple's spi.h).
Similarly for Wirish.
The old include style (#include "header.h") is now deprecated.
libmaple/*.h:
- Change include guard #defines from _FOO_H_ to _LIBMAPLE_FOO_H_.
- Add license headers where they're missing
- Add conditional extern "C" { ... } blocks where they're missing
(they aren't always necessary, but we might was well do it against
the future, while we're at it.).
- Change includes from #include "foo.h" to #include <libmaple/foo.h>.
- Move includes after extern "C".
- Remove extra trailing newlines
Note that this doesn't include the headers under libmaple/usb/ or
libmaple/usb/usb_lib. These will get fixed later.
libmaple/*.c:
- Change includes from #include "foo.h" to #include <libmaple/foo.h>.
Makefile:
- Add I$(LIBMAPLE_PATH)/include/libmaple to GLOBAL_FLAGS. This allows
for users (including Wirish) to migrate their code, but should go
away ASAP, since it slows down compilation.
Wirish:
- Move wirish/**/*.h to (new) wirish/include/wirish/. This ignores
the USB headers, which, as usual, are getting handled after
everything else.
- Similarly generify wirish/boards/ structure. For each supported
board "foo", move wirish/boards/foo.h and wirish/boards/foo.cpp to
wirish/boards/foo/include/board/board.h and
wirish/boards/foo/board.cpp, respectively. Also remove the #ifdef
hacks around the .cpp files.
- wirish/rules.mk: put wirish/boards/foo/include in the include path
(and add wirish/boards/foo/board.cpp to the list of sources to be
compiled). This allows saying:
#include <board/board.h>
instead of the hack currently in place. We can allow the user to
override this setting later to make adding custom board definitions
easier.
- Disable -Werror in libmaple/rules.mk, as the current USB warnings
don't let the olimex_stm32_h103 board compile. We can re-enable
-Werror once we've moved the board-specific bits out of libmaple
proper.
libraries, examples:
- Update includes accordingly.
- Miscellaneous cosmetic fixups.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|