| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Various board-specific #defines and arrays of pins added.
For the changelog (some of this information predates this commit):
* wirish/boards.h now declares the following arrays of pin numbers:
* boardPWMPins - PWM-capable pins
* boardADCPins - ADC-capable pins
* boardUsedPins - pins already in use, e.g. BOARD_BUTTON_PIN
It also declares a bool boardUsesPin(uint8 pin) function for
convenient testing of whether a pin is in use.
* wirish/boards/*.h now define:
* BOARD_USART1_TX_PIN
* BOARD_USART1_RX_PIN
* BOARD_USART2_TX_PIN
* BOARD_USART2_RX_PIN
* BOARD_USART3_TX_PIN
* BOARD_USART3_RX_PIN
* BOARD_NR_GPIO_PINS (renamed from NR_GPIO_PINS)
* BOARD_NR_USARTS (renamed from NR_USARTS)
* BOARD_NR_PWM_PINS
* BOARD_NR_ADC_PINS
* BOARD_NR_USED_PINS
* wirish/boards/maple_native.h now defines:
* BOARD_UART4_TX_PIN
* BOARD_UART4_RX_PIN
* BOARD_UART5_TX_PIN
* BOARD_UART5_RX_PIN
(Unfortunately, wirish/boards/maple_RET6.h cannot, since at least
one of the UART4/UART5 pins are used already; this will require layout
changes for a wide-release Maple form factor RET6 board).
* wirish/boards/*.cpp all include the corresponding array definitions.
They all live in flash by default, thanks to the new __FLASH__ macro
in wirish/wirish_types.h, which is a synonym for the existing __attr_flash
#define in libmaple/libmaple_types.h.
The documentation was updated to include this information. It also
gained various FIXME/TODO comments related to its generalization
across boards.
The quality assurance-related examples (examples/qa-slave-shield.cpp
and examples/test-session.cpp) now make heavy use of board-specific
values to ensure portability.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Many of the #defines in libmaple.h were board-specific, not
MCU-specific. Most of these were only used by code under
libmaple/usb/. These were moved into usb_config.h, and are clearly
marked as being terrible hacks. I'm going to treat the USB stack as a
black box that we'll deal with later.
Further, instead of having a variety of #defines like "How many USARTS
do I have?", we decide that based on the density of the chip. This is
determined by testing for STM32_MEDIUM_DENSITY or STM32_HIGH_DENSITY
defines. libmaple currently doesn't support low-density chips, so
that suffices. The Makefile will set these automatically based on the
MCU.
Other offending #defines are ERROR_LED_PORT and ERROR_LED_PIN; these
were made optional, but they're set in the Makefile as a hack to keep
things working.
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
| |
they're properly CC attributed now.
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|