diff options
Diffstat (limited to 'wirish')
| -rw-r--r-- | wirish/comm/HardwareSerial.h | 9 | ||||
| -rw-r--r-- | wirish/io.h | 6 |
2 files changed, 11 insertions, 4 deletions
diff --git a/wirish/comm/HardwareSerial.h b/wirish/comm/HardwareSerial.h index 17be49f..fdfc06d 100644 --- a/wirish/comm/HardwareSerial.h +++ b/wirish/comm/HardwareSerial.h @@ -33,6 +33,13 @@ #include "Print.h" +/* NB: this class documented "by hand" (i.e., not using Doxygen) in: + + libmaple/docs/source/lang/serial.rst + + If you alter the public HardwareSerial interface, you must update + the documentation accordingly. */ + class HardwareSerial : public Print { private: uint8 usart_num; @@ -50,7 +57,7 @@ class HardwareSerial : public Print { uint8 rx_pin, uint8 timer_num, uint8 compare_num); - void begin(uint32); + void begin(uint32 baud); void end(void); uint32 available(void); uint8 read(void); diff --git a/wirish/io.h b/wirish/io.h index f01efcb..24f2611 100644 --- a/wirish/io.h +++ b/wirish/io.h @@ -79,8 +79,8 @@ typedef enum WiringPinMode { when it is closer to 0v (ground) it is low. If no external circuit is pulling the pin voltage to high or low, it will tend to randomly oscillate and be very - sensitive to noise (eg a breath of air across the pin - will cause the state to flip). */ + sensitive to noise (e.g., a breath of air across the pin + might cause the state to flip). */ INPUT_ANALOG, /**< This is a special mode for when the pin will be used for analog (not digital) reads. Enables ADC @@ -101,7 +101,7 @@ typedef enum WiringPinMode { the state will be low unless an external device is specifically pulling the pin up to 3.3v, in which case the "gentle" pull down will not - effect the state of the input. */ + affect the state of the input. */ INPUT_FLOATING, /**< Synonym for INPUT. */ |