aboutsummaryrefslogtreecommitdiffstats
path: root/wirish
diff options
context:
space:
mode:
Diffstat (limited to 'wirish')
-rw-r--r--wirish/HardwareSerial.cpp98
-rw-r--r--wirish/boards/VLDiscovery/include/board/board.h6
-rw-r--r--wirish/boards/maple/include/board/board.h9
-rw-r--r--wirish/boards/maple_RET6/include/board/board.h11
-rw-r--r--wirish/boards/maple_mini/include/board/board.h6
-rw-r--r--wirish/boards/maple_native/include/board/board.h6
-rw-r--r--wirish/boards/olimex_stm32_h103/include/board/board.h6
-rw-r--r--wirish/boards/st_stm3220g_eval/include/board/board.h12
-rw-r--r--wirish/include/wirish/HardwareSerial.h26
-rw-r--r--wirish/rules.mk2
10 files changed, 126 insertions, 56 deletions
diff --git a/wirish/HardwareSerial.cpp b/wirish/HardwareSerial.cpp
index 0f12e72..3f418e2 100644
--- a/wirish/HardwareSerial.cpp
+++ b/wirish/HardwareSerial.cpp
@@ -2,6 +2,7 @@
* The MIT License
*
* Copyright (c) 2010 Perry Hung.
+ * Copyright (c) 2011, 2012 LeafLabs, LLC.
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
@@ -34,36 +35,36 @@
#include <libmaple/libmaple.h>
#include <libmaple/gpio.h>
#include <libmaple/timer.h>
+#include <libmaple/usart.h>
-#include <wirish/boards.h>
-
-#define TX1 BOARD_USART1_TX_PIN
-#define RX1 BOARD_USART1_RX_PIN
-#define TX2 BOARD_USART2_TX_PIN
-#define RX2 BOARD_USART2_RX_PIN
-#define TX3 BOARD_USART3_TX_PIN
-#define RX3 BOARD_USART3_RX_PIN
-#if defined STM32_HIGH_DENSITY && !defined(BOARD_maple_RET6)
-#define TX4 BOARD_UART4_TX_PIN
-#define RX4 BOARD_UART4_RX_PIN
-#define TX5 BOARD_UART5_TX_PIN
-#define RX5 BOARD_UART5_RX_PIN
-#endif
+#define DEFINE_HWSERIAL(name, n) \
+ HardwareSerial name(USART##n, \
+ BOARD_USART##n##_TX_PIN, \
+ BOARD_USART##n##_RX_PIN)
-HardwareSerial Serial1(USART1, TX1, RX1, STM32_PCLK2);
-HardwareSerial Serial2(USART2, TX2, RX2, STM32_PCLK1);
-HardwareSerial Serial3(USART3, TX3, RX3, STM32_PCLK1);
-#if defined(STM32_HIGH_DENSITY) && !defined(BOARD_maple_RET6)
-HardwareSerial Serial4(UART4, TX4, RX4, STM32_PCLK1);
-HardwareSerial Serial5(UART5, TX5, RX5, STM32_PCLK1);
+#if BOARD_HAVE_USART1
+DEFINE_HWSERIAL(Serial1, 1);
+#endif
+#if BOARD_HAVE_USART2
+DEFINE_HWSERIAL(Serial2, 2);
+#endif
+#if BOARD_HAVE_USART3
+DEFINE_HWSERIAL(Serial3, 3);
+#endif
+#if BOARD_HAVE_UART4
+DEFINE_HWSERIAL(Serial4, 4);
+#endif
+#if BOARD_HAVE_UART5
+DEFINE_HWSERIAL(Serial5, 5);
+#endif
+#if BOARD_HAVE_USART6
+DEFINE_HWSERIAL(Serial6, 6);
#endif
HardwareSerial::HardwareSerial(usart_dev *usart_device,
uint8 tx_pin,
- uint8 rx_pin,
- uint32 clock_speed) {
+ uint8 rx_pin) {
this->usart_device = usart_device;
- this->clock_speed = clock_speed;
this->tx_pin = tx_pin;
this->rx_pin = rx_pin;
}
@@ -72,31 +73,44 @@ HardwareSerial::HardwareSerial(usart_dev *usart_device,
* Set up/tear down
*/
+#if STM32_MCU_SERIES == STM32_SERIES_F1
+/* F1 MCUs have no GPIO_AFR[HL], so turn off PWM if there's a conflict
+ * on this GPIO bit. */
+static void disable_timer_if_necessary(timer_dev *dev, uint8 ch) {
+ if (txi->timer_device != NULL) {
+ timer_set_mode(txi->timer_device, txi->timer_channel, TIMER_DISABLED);
+ }
+}
+#elif (STM32_MCU_SERIES == STM32_SERIES_F2) || \
+ (STM32_MCU_SERIES == STM32_SERIES_F4)
+#define disable_timer_if_necessary(dev, ch) ((void)0)
+#else
+#warn "Unsupported STM32 series; timer conflicts are possible"
+#endif
+
void HardwareSerial::begin(uint32 baud) {
- ASSERT(baud <= usart_device->max_baud);
+ ASSERT(baud <= this->usart_device->max_baud);
- if (baud > usart_device->max_baud) {
+ if (baud > this->usart_device->max_baud) {
return;
}
- const stm32_pin_info *txi = &PIN_MAP[tx_pin];
- const stm32_pin_info *rxi = &PIN_MAP[rx_pin];
+ const stm32_pin_info *txi = &PIN_MAP[this->tx_pin];
+ const stm32_pin_info *rxi = &PIN_MAP[this->rx_pin];
- gpio_set_mode(txi->gpio_device, txi->gpio_bit, GPIO_AF_OUTPUT_PP);
- gpio_set_mode(rxi->gpio_device, rxi->gpio_bit, GPIO_INPUT_FLOATING);
-
- if (txi->timer_device != NULL) {
- /* Turn off any PWM if there's a conflict on this GPIO bit. */
- timer_set_mode(txi->timer_device, txi->timer_channel, TIMER_DISABLED);
- }
+ disable_timer_if_necessary(txi->timer_device, txi->timer_channel);
- usart_init(usart_device);
- usart_set_baud_rate(usart_device, clock_speed, baud);
- usart_enable(usart_device);
+ usart_async_gpio_cfg(this->usart_device,
+ rxi->gpio_device, rxi->gpio_bit,
+ txi->gpio_device, txi->gpio_bit,
+ 0);
+ usart_init(this->usart_device);
+ usart_set_baud_rate(this->usart_device, USART_USE_PCLK, baud);
+ usart_enable(this->usart_device);
}
void HardwareSerial::end(void) {
- usart_disable(usart_device);
+ usart_disable(this->usart_device);
}
/*
@@ -104,17 +118,17 @@ void HardwareSerial::end(void) {
*/
uint8 HardwareSerial::read(void) {
- return usart_getc(usart_device);
+ return usart_getc(this->usart_device);
}
uint32 HardwareSerial::available(void) {
- return usart_data_available(usart_device);
+ return usart_data_available(this->usart_device);
}
void HardwareSerial::write(unsigned char ch) {
- usart_putc(usart_device, ch);
+ usart_putc(this->usart_device, ch);
}
void HardwareSerial::flush(void) {
- usart_reset_rx(usart_device);
+ usart_reset_rx(this->usart_device);
}
diff --git a/wirish/boards/VLDiscovery/include/board/board.h b/wirish/boards/VLDiscovery/include/board/board.h
index 04d21c7..c54abc1 100644
--- a/wirish/boards/VLDiscovery/include/board/board.h
+++ b/wirish/boards/VLDiscovery/include/board/board.h
@@ -45,6 +45,12 @@
/* Number of USARTs/UARTs whose pins are broken out to headers */
#define BOARD_NR_USARTS 3
+#define BOARD_HAVE_USART1 1
+#define BOARD_HAVE_USART2 1
+#define BOARD_HAVE_USART3 1
+#define BOARD_HAVE_UART4 0
+#define BOARD_HAVE_UART5 0
+#define BOARD_HAVE_USART6 0
/* Default USART pin numbers (not considering AFIO remap) */
#define BOARD_USART1_TX_PIN 7
diff --git a/wirish/boards/maple/include/board/board.h b/wirish/boards/maple/include/board/board.h
index 49f5b9a..ed89fee 100644
--- a/wirish/boards/maple/include/board/board.h
+++ b/wirish/boards/maple/include/board/board.h
@@ -39,8 +39,15 @@
#define BOARD_BUTTON_PIN 38
#define BOARD_LED_PIN 13
-/* Number of USARTs/UARTs whose pins are broken out to headers */
+/* Number of USARTs/UARTs whose pins are broken out to headers, and
+ * macros saying which ones they are. */
#define BOARD_NR_USARTS 3
+#define BOARD_HAVE_USART1 1
+#define BOARD_HAVE_USART2 1
+#define BOARD_HAVE_USART3 1
+#define BOARD_HAVE_UART4 0
+#define BOARD_HAVE_UART5 0
+#define BOARD_HAVE_USART6 0
/* Default USART pin numbers (not considering AFIO remap) */
#define BOARD_USART1_TX_PIN 7
diff --git a/wirish/boards/maple_RET6/include/board/board.h b/wirish/boards/maple_RET6/include/board/board.h
index 1a0365a..3291498 100644
--- a/wirish/boards/maple_RET6/include/board/board.h
+++ b/wirish/boards/maple_RET6/include/board/board.h
@@ -36,17 +36,20 @@
#ifndef _BOARDS_MAPLE_RET6_H_
#define _BOARDS_MAPLE_RET6_H_
-/* A few of these values will seem strange given that it's a
- * high-density board. */
-
#define CYCLES_PER_MICROSECOND 72
#define SYSTICK_RELOAD_VAL 71999 /* takes a cycle to reload */
#define BOARD_BUTTON_PIN 38
#define BOARD_LED_PIN 13
-/* Note: UART4 and UART5 have pins which aren't broken out :( */
+/* UART4 and UART5 have pins which aren't broken out :( */
#define BOARD_NR_USARTS 3
+#define BOARD_HAVE_USART1 1
+#define BOARD_HAVE_USART2 1
+#define BOARD_HAVE_USART3 1
+#define BOARD_HAVE_UART4 0
+#define BOARD_HAVE_UART5 0
+#define BOARD_HAVE_USART6 0
#define BOARD_USART1_TX_PIN 7
#define BOARD_USART1_RX_PIN 8
#define BOARD_USART2_TX_PIN 1
diff --git a/wirish/boards/maple_mini/include/board/board.h b/wirish/boards/maple_mini/include/board/board.h
index bfba46d..8ba91ce 100644
--- a/wirish/boards/maple_mini/include/board/board.h
+++ b/wirish/boards/maple_mini/include/board/board.h
@@ -43,6 +43,12 @@
#define BOARD_LED_PIN 33
#define BOARD_NR_USARTS 3
+#define BOARD_HAVE_USART1 1
+#define BOARD_HAVE_USART2 1
+#define BOARD_HAVE_USART3 1
+#define BOARD_HAVE_UART4 0
+#define BOARD_HAVE_UART5 0
+#define BOARD_HAVE_USART6 0
#define BOARD_USART1_TX_PIN 26
#define BOARD_USART1_RX_PIN 25
#define BOARD_USART2_TX_PIN 9
diff --git a/wirish/boards/maple_native/include/board/board.h b/wirish/boards/maple_native/include/board/board.h
index 397afaf..a4f8896 100644
--- a/wirish/boards/maple_native/include/board/board.h
+++ b/wirish/boards/maple_native/include/board/board.h
@@ -43,6 +43,12 @@
#define BOARD_BUTTON_PIN 6
#define BOARD_NR_USARTS 5
+#define BOARD_HAVE_USART1 1
+#define BOARD_HAVE_USART2 1
+#define BOARD_HAVE_USART3 1
+#define BOARD_HAVE_UART4 1
+#define BOARD_HAVE_UART5 1
+#define BOARD_HAVE_USART6 0
#define BOARD_USART1_TX_PIN 24
#define BOARD_USART1_RX_PIN 25
#define BOARD_USART2_TX_PIN 50
diff --git a/wirish/boards/olimex_stm32_h103/include/board/board.h b/wirish/boards/olimex_stm32_h103/include/board/board.h
index b312e26..46367ac 100644
--- a/wirish/boards/olimex_stm32_h103/include/board/board.h
+++ b/wirish/boards/olimex_stm32_h103/include/board/board.h
@@ -42,6 +42,12 @@
/* Number of USARTs/UARTs whose pins are broken out to headers */
#define BOARD_NR_USARTS 3
+#define BOARD_HAVE_USART1 1
+#define BOARD_HAVE_USART2 1
+#define BOARD_HAVE_USART3 1
+#define BOARD_HAVE_UART4 0
+#define BOARD_HAVE_UART5 0
+#define BOARD_HAVE_USART6 0
/* Default USART pin numbers (not considering AFIO remap) */
#define BOARD_USART1_TX_PIN 3
diff --git a/wirish/boards/st_stm3220g_eval/include/board/board.h b/wirish/boards/st_stm3220g_eval/include/board/board.h
index 08b935e..f99a585 100644
--- a/wirish/boards/st_stm3220g_eval/include/board/board.h
+++ b/wirish/boards/st_stm3220g_eval/include/board/board.h
@@ -27,7 +27,11 @@
/**
* @file wirish/boards/st_stm3220g_eval/include/board/board.h
* @author Marti Bolivar <mbolivar@leaflabs.com>
- * @brief STM3220G-EVAL board header.
+ * @brief STM3220G-EVAL board stub header.
+ *
+ * This (and the corresponding board.cpp) needs to be fixed and
+ * fleshed out. Do it later? Maybe someone who wants support for this
+ * board will do it.
*/
#ifndef _BOARD_ST_STM3220G_EVAL_H_
@@ -40,6 +44,12 @@
#define BOARD_LED_PIN 0
#define BOARD_NR_USARTS 0
+#define BOARD_HAVE_USART1 0
+#define BOARD_HAVE_USART2 0
+#define BOARD_HAVE_USART3 0
+#define BOARD_HAVE_UART4 0
+#define BOARD_HAVE_UART5 0
+#define BOARD_HAVE_USART6 0
#define BOARD_NR_SPI 0
#define BOARD_NR_GPIO_PINS 6
#define BOARD_NR_PWM_PINS 0
diff --git a/wirish/include/wirish/HardwareSerial.h b/wirish/include/wirish/HardwareSerial.h
index 1eaacb6..2b1e747 100644
--- a/wirish/include/wirish/HardwareSerial.h
+++ b/wirish/include/wirish/HardwareSerial.h
@@ -2,6 +2,7 @@
* The MIT License
*
* Copyright (c) 2010 Perry Hung.
+ * Copyright (c) 2011, 2012 LeafLabs, LLC.
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
@@ -33,9 +34,9 @@
#define _WIRISH_HARDWARESERIAL_H_
#include <libmaple/libmaple_types.h>
-#include <libmaple/usart.h>
#include <wirish/Print.h>
+#include <wirish/boards.h>
/*
* IMPORTANT:
@@ -47,12 +48,13 @@
* the documentation accordingly.
*/
+struct usart_dev;
+
class HardwareSerial : public Print {
public:
- HardwareSerial(usart_dev *usart_device,
+ HardwareSerial(struct usart_dev *usart_device,
uint8 tx_pin,
- uint8 rx_pin,
- uint32 clock_speed);
+ uint8 rx_pin);
/* Set up/tear down */
void begin(uint32 baud);
@@ -69,18 +71,28 @@ public:
int txPin(void) { return this->tx_pin; }
int rxPin(void) { return this->rx_pin; }
private:
- usart_dev *usart_device;
+ struct usart_dev *usart_device;
uint8 tx_pin;
uint8 rx_pin;
- uint32 clock_speed;
};
+#if BOARD_HAVE_USART1
extern HardwareSerial Serial1;
+#endif
+#if BOARD_HAVE_USART2
extern HardwareSerial Serial2;
+#endif
+#if BOARD_HAVE_USART3
extern HardwareSerial Serial3;
-#if defined(STM32_HIGH_DENSITY) && !defined(BOARD_maple_RET6)
+#endif
+#if BOARD_HAVE_UART4
extern HardwareSerial Serial4;
+#endif
+#if BOARD_HAVE_UART5
extern HardwareSerial Serial5;
#endif
+#if BOARD_HAVE_USART6
+extern HardwareSerial Serial6;
+#endif
#endif
diff --git a/wirish/rules.mk b/wirish/rules.mk
index 903c817..4084448 100644
--- a/wirish/rules.mk
+++ b/wirish/rules.mk
@@ -22,6 +22,7 @@ sSRCS_$(d) := start.S
cSRCS_$(d) := start_c.c
cppSRCS_$(d) := boards.cpp
cppSRCS_$(d) += cxxabi-compat.cpp
+cppSRCS_$(d) += HardwareSerial.cpp
cppSRCS_$(d) += Print.cpp
cppSRCS_$(d) += wirish_digital.cpp
cppSRCS_$(d) += wirish_math.cpp
@@ -31,7 +32,6 @@ cppSRCS_$(d) += $(MCU_SERIES)/boards_setup.cpp
cppSRCS_$(d) += $(MCU_SERIES)/wirish_digital.cpp
cppSRCS_$(d) += $(WIRISH_BOARD_PATH)/board.cpp
# TODO: revise these appropriately F2 and put them back in:
-# HardwareSerial.cpp
# HardwareSPI.cpp
# HardwareTimer.cpp
# usb_serial.cpp