diff options
Diffstat (limited to 'wirish/stm32f1/boards_setup.cpp')
| -rw-r--r-- | wirish/stm32f1/boards_setup.cpp | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/wirish/stm32f1/boards_setup.cpp b/wirish/stm32f1/boards_setup.cpp new file mode 100644 index 0000000..4ee292a --- /dev/null +++ b/wirish/stm32f1/boards_setup.cpp @@ -0,0 +1,141 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. +*****************************************************************************/ + +/** + * @file wirish/stm32f1/boards_setup.cpp + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F1 chip setup. + */ + +#include <libmaple/rcc.h> +#include <libmaple/gpio.h> +#include <libmaple/adc.h> +#include <libmaple/timer.h> +#include <libmaple/usb_cdcacm.h> + +#include <board/board.h> + +/* FIXME: Reintroduce all "#if 0"'ed blocks once libmaple provides + * these definitions again. */ + +namespace wirish { + namespace priv { + + static stm32f1_rcc_pll_data pll_data = {RCC_PLLMUL_9}; + rcc_pll_cfg board_pll_cfg = {RCC_PLLSRC_HSE, &pll_data}; + +#if 0 + static void config_adc(const adc_dev* dev); + static void config_timer(timer_dev*); +#endif + + void board_reset_pll(void) { + // TODO + } + + void board_setup_clock_prescalers(void) { + rcc_set_prescaler(RCC_PRESCALER_AHB, RCC_AHB_SYSCLK_DIV_1); + rcc_set_prescaler(RCC_PRESCALER_APB1, RCC_APB1_HCLK_DIV_2); + rcc_set_prescaler(RCC_PRESCALER_APB2, RCC_APB2_HCLK_DIV_1); + } + + void board_setup_gpio(void) { + gpio_init_all(); + // Initialize AFIO here, too, so peripheral remaps and external + // interrupts work out of the box. + afio_init(); + } + + void board_setup_adc(void) { +#if 0 + rcc_set_prescaler(RCC_PRESCALER_ADC, RCC_ADCPRE_PCLK_DIV_6); + adc_foreach(config_adc); +#endif + } + + void board_setup_timers(void) { +#if 0 + timer_foreach(config_timer); +#endif + } + + void board_setup_usb(void) { +#if 0 + usb_cdcacm_enable(BOARD_USB_DISC_DEV, BOARD_USB_DISC_BIT); +#endif + } + + /* + * Auxiliary routines + */ + +#if 0 + static void config_adc(const adc_dev *dev) { + adc_init(dev); + + adc_set_extsel(dev, ADC_SWSTART); + adc_set_exttrig(dev, true); + + adc_enable(dev); + adc_calibrate(dev); + adc_set_sample_rate(dev, ADC_SMPR_55_5); + } + + static void config_timer(timer_dev *dev) { + timer_adv_reg_map *regs = (dev->regs).adv; + const uint16 full_overflow = 0xFFFF; + const uint16 half_duty = 0x8FFF; + + timer_init(dev); + timer_pause(dev); + + regs->CR1 = TIMER_CR1_ARPE; + regs->PSC = 1; + regs->SR = 0; + regs->DIER = 0; + regs->EGR = TIMER_EGR_UG; + + switch (dev->type) { + case TIMER_ADVANCED: + regs->BDTR = TIMER_BDTR_MOE | TIMER_BDTR_LOCK_OFF; + // fall-through + case TIMER_GENERAL: + timer_set_reload(dev, full_overflow); + + for (int channel = 1; channel <= 4; channel++) { + timer_set_compare(dev, channel, half_duty); + timer_oc_set_mode(dev, channel, TIMER_OC_MODE_PWM_1, TIMER_OC_PE); + } + // fall-through + case TIMER_BASIC: + break; + } + + timer_resume(dev); + } +#endif + } +} |