aboutsummaryrefslogtreecommitdiffstats
path: root/wirish/comm/HardwareSPI.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'wirish/comm/HardwareSPI.cpp')
-rw-r--r--wirish/comm/HardwareSPI.cpp110
1 files changed, 70 insertions, 40 deletions
diff --git a/wirish/comm/HardwareSPI.cpp b/wirish/comm/HardwareSPI.cpp
index 25513ee..2527a01 100644
--- a/wirish/comm/HardwareSPI.cpp
+++ b/wirish/comm/HardwareSPI.cpp
@@ -33,18 +33,46 @@
#include "timer.h"
#include "util.h"
+#include "rcc.h"
#include "wirish.h"
#include "boards.h"
+struct spi_pins {
+ uint8 nss;
+ uint8 sck;
+ uint8 miso;
+ uint8 mosi;
+};
+
+static const spi_pins* dev_to_spi_pins(spi_dev *dev);
+
static void enable_device(spi_dev *dev,
bool as_master,
SPIFrequency frequency,
spi_cfg_flag endianness,
spi_mode mode);
+static const spi_pins board_spi_pins[] __FLASH__ = {
+ {BOARD_SPI1_NSS_PIN,
+ BOARD_SPI1_SCK_PIN,
+ BOARD_SPI1_MISO_PIN,
+ BOARD_SPI1_MOSI_PIN},
+ {BOARD_SPI2_NSS_PIN,
+ BOARD_SPI2_SCK_PIN,
+ BOARD_SPI2_MISO_PIN,
+ BOARD_SPI2_MOSI_PIN},
+#ifdef STM32_HIGH_DENSITY
+ {BOARD_SPI3_NSS_PIN,
+ BOARD_SPI3_SCK_PIN,
+ BOARD_SPI3_MISO_PIN,
+ BOARD_SPI3_MOSI_PIN},
+#endif
+};
+
+
/*
- * Constructor, public methods
+ * Constructor
*/
HardwareSPI::HardwareSPI(uint32 spi_num) {
@@ -65,6 +93,10 @@ HardwareSPI::HardwareSPI(uint32 spi_num) {
}
}
+/*
+ * Set up/tear down
+ */
+
void HardwareSPI::begin(SPIFrequency frequency, uint32 bitOrder, uint32 mode) {
if (mode >= 4) {
ASSERT(0);
@@ -111,6 +143,10 @@ void HardwareSPI::end(void) {
spi_peripheral_disable(this->spi_d);
}
+/*
+ * I/O
+ */
+
uint8 HardwareSPI::read(void) {
uint8 buf[1];
this->read(buf, 1);
@@ -143,6 +179,26 @@ uint8 HardwareSPI::transfer(uint8 byte) {
}
/*
+ * Pin accessors
+ */
+
+uint8 HardwareSPI::misoPin(void) {
+ return dev_to_spi_pins(this->spi_d)->miso;
+}
+
+uint8 HardwareSPI::mosiPin(void) {
+ return dev_to_spi_pins(this->spi_d)->mosi;
+}
+
+uint8 HardwareSPI::sckPin(void) {
+ return dev_to_spi_pins(this->spi_d)->sck;
+}
+
+uint8 HardwareSPI::nssPin(void) {
+ return dev_to_spi_pins(this->spi_d)->nss;
+}
+
+/*
* Deprecated functions
*/
@@ -175,6 +231,17 @@ uint8 HardwareSPI::recv(void) {
static void configure_gpios(spi_dev *dev, bool as_master);
static spi_baud_rate determine_baud_rate(spi_dev *dev, SPIFrequency freq);
+static const spi_pins* dev_to_spi_pins(spi_dev *dev) {
+ switch (dev->clk_id) {
+ case RCC_SPI1: return board_spi_pins;
+ case RCC_SPI2: return board_spi_pins + 1;
+#ifdef STM32_HIGH_DENSITY
+ case RCC_SPI3: return board_spi_pins + 2;
+#endif
+ default: return NULL;
+ }
+}
+
/* Enables the device in master or slave full duplex mode. If you
* change this code, you must ensure that appropriate changes are made
* to HardwareSPI::end(). */
@@ -202,47 +269,10 @@ static void disable_pwm(const stm32_pin_info *i) {
}
}
-typedef struct spi_pins {
- uint8 nss;
- uint8 sck;
- uint8 miso;
- uint8 mosi;
-} spi_pins;
-
static void configure_gpios(spi_dev *dev, bool as_master) {
- const spi_pins spi_pin_config[] = {
- {BOARD_SPI1_NSS_PIN,
- BOARD_SPI1_SCK_PIN,
- BOARD_SPI1_MISO_PIN,
- BOARD_SPI1_MOSI_PIN},
- {BOARD_SPI2_NSS_PIN,
- BOARD_SPI2_SCK_PIN,
- BOARD_SPI2_MISO_PIN,
- BOARD_SPI2_MOSI_PIN},
-#ifdef STM32_HIGH_DENSITY
- {BOARD_SPI3_NSS_PIN,
- BOARD_SPI3_SCK_PIN,
- BOARD_SPI3_MISO_PIN,
- BOARD_SPI3_MOSI_PIN},
-#endif
- };
+ const spi_pins *pins = dev_to_spi_pins(dev);
- const spi_pins *pins;
-
- switch (dev->clk_id) {
- case RCC_SPI1:
- pins = &spi_pin_config[0];
- break;
- case RCC_SPI2:
- pins = &spi_pin_config[1];
- break;
-#ifdef STM32_HIGH_DENSITY
- case RCC_SPI3:
- pins = &spi_pin_config[2];
- break;
-#endif
- default:
- ASSERT(0);
+ if (!pins) {
return;
}