diff options
Diffstat (limited to 'wirish/HardwareSerial.cpp')
| -rw-r--r-- | wirish/HardwareSerial.cpp | 98 |
1 files changed, 56 insertions, 42 deletions
diff --git a/wirish/HardwareSerial.cpp b/wirish/HardwareSerial.cpp index 0f12e72..3f418e2 100644 --- a/wirish/HardwareSerial.cpp +++ b/wirish/HardwareSerial.cpp @@ -2,6 +2,7 @@ * The MIT License * * Copyright (c) 2010 Perry Hung. + * Copyright (c) 2011, 2012 LeafLabs, LLC. * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation @@ -34,36 +35,36 @@ #include <libmaple/libmaple.h> #include <libmaple/gpio.h> #include <libmaple/timer.h> +#include <libmaple/usart.h> -#include <wirish/boards.h> - -#define TX1 BOARD_USART1_TX_PIN -#define RX1 BOARD_USART1_RX_PIN -#define TX2 BOARD_USART2_TX_PIN -#define RX2 BOARD_USART2_RX_PIN -#define TX3 BOARD_USART3_TX_PIN -#define RX3 BOARD_USART3_RX_PIN -#if defined STM32_HIGH_DENSITY && !defined(BOARD_maple_RET6) -#define TX4 BOARD_UART4_TX_PIN -#define RX4 BOARD_UART4_RX_PIN -#define TX5 BOARD_UART5_TX_PIN -#define RX5 BOARD_UART5_RX_PIN -#endif +#define DEFINE_HWSERIAL(name, n) \ + HardwareSerial name(USART##n, \ + BOARD_USART##n##_TX_PIN, \ + BOARD_USART##n##_RX_PIN) -HardwareSerial Serial1(USART1, TX1, RX1, STM32_PCLK2); -HardwareSerial Serial2(USART2, TX2, RX2, STM32_PCLK1); -HardwareSerial Serial3(USART3, TX3, RX3, STM32_PCLK1); -#if defined(STM32_HIGH_DENSITY) && !defined(BOARD_maple_RET6) -HardwareSerial Serial4(UART4, TX4, RX4, STM32_PCLK1); -HardwareSerial Serial5(UART5, TX5, RX5, STM32_PCLK1); +#if BOARD_HAVE_USART1 +DEFINE_HWSERIAL(Serial1, 1); +#endif +#if BOARD_HAVE_USART2 +DEFINE_HWSERIAL(Serial2, 2); +#endif +#if BOARD_HAVE_USART3 +DEFINE_HWSERIAL(Serial3, 3); +#endif +#if BOARD_HAVE_UART4 +DEFINE_HWSERIAL(Serial4, 4); +#endif +#if BOARD_HAVE_UART5 +DEFINE_HWSERIAL(Serial5, 5); +#endif +#if BOARD_HAVE_USART6 +DEFINE_HWSERIAL(Serial6, 6); #endif HardwareSerial::HardwareSerial(usart_dev *usart_device, uint8 tx_pin, - uint8 rx_pin, - uint32 clock_speed) { + uint8 rx_pin) { this->usart_device = usart_device; - this->clock_speed = clock_speed; this->tx_pin = tx_pin; this->rx_pin = rx_pin; } @@ -72,31 +73,44 @@ HardwareSerial::HardwareSerial(usart_dev *usart_device, * Set up/tear down */ +#if STM32_MCU_SERIES == STM32_SERIES_F1 +/* F1 MCUs have no GPIO_AFR[HL], so turn off PWM if there's a conflict + * on this GPIO bit. */ +static void disable_timer_if_necessary(timer_dev *dev, uint8 ch) { + if (txi->timer_device != NULL) { + timer_set_mode(txi->timer_device, txi->timer_channel, TIMER_DISABLED); + } +} +#elif (STM32_MCU_SERIES == STM32_SERIES_F2) || \ + (STM32_MCU_SERIES == STM32_SERIES_F4) +#define disable_timer_if_necessary(dev, ch) ((void)0) +#else +#warn "Unsupported STM32 series; timer conflicts are possible" +#endif + void HardwareSerial::begin(uint32 baud) { - ASSERT(baud <= usart_device->max_baud); + ASSERT(baud <= this->usart_device->max_baud); - if (baud > usart_device->max_baud) { + if (baud > this->usart_device->max_baud) { return; } - const stm32_pin_info *txi = &PIN_MAP[tx_pin]; - const stm32_pin_info *rxi = &PIN_MAP[rx_pin]; + const stm32_pin_info *txi = &PIN_MAP[this->tx_pin]; + const stm32_pin_info *rxi = &PIN_MAP[this->rx_pin]; - gpio_set_mode(txi->gpio_device, txi->gpio_bit, GPIO_AF_OUTPUT_PP); - gpio_set_mode(rxi->gpio_device, rxi->gpio_bit, GPIO_INPUT_FLOATING); - - if (txi->timer_device != NULL) { - /* Turn off any PWM if there's a conflict on this GPIO bit. */ - timer_set_mode(txi->timer_device, txi->timer_channel, TIMER_DISABLED); - } + disable_timer_if_necessary(txi->timer_device, txi->timer_channel); - usart_init(usart_device); - usart_set_baud_rate(usart_device, clock_speed, baud); - usart_enable(usart_device); + usart_async_gpio_cfg(this->usart_device, + rxi->gpio_device, rxi->gpio_bit, + txi->gpio_device, txi->gpio_bit, + 0); + usart_init(this->usart_device); + usart_set_baud_rate(this->usart_device, USART_USE_PCLK, baud); + usart_enable(this->usart_device); } void HardwareSerial::end(void) { - usart_disable(usart_device); + usart_disable(this->usart_device); } /* @@ -104,17 +118,17 @@ void HardwareSerial::end(void) { */ uint8 HardwareSerial::read(void) { - return usart_getc(usart_device); + return usart_getc(this->usart_device); } uint32 HardwareSerial::available(void) { - return usart_data_available(usart_device); + return usart_data_available(this->usart_device); } void HardwareSerial::write(unsigned char ch) { - usart_putc(usart_device, ch); + usart_putc(this->usart_device, ch); } void HardwareSerial::flush(void) { - usart_reset_rx(usart_device); + usart_reset_rx(this->usart_device); } |