aboutsummaryrefslogtreecommitdiffstats
path: root/support
diff options
context:
space:
mode:
Diffstat (limited to 'support')
-rw-r--r--support/ld/maple_native/flash.ld2
-rw-r--r--support/ld/maple_native/jtag.ld4
-rw-r--r--support/openocd/flash_0.4.0.cfg89
-rw-r--r--support/openocd/run_0.4.0.cfg75
-rwxr-xr-xsupport/scripts/copy-to-ide18
5 files changed, 178 insertions, 10 deletions
diff --git a/support/ld/maple_native/flash.ld b/support/ld/maple_native/flash.ld
index 7e1e453..4e820d2 100644
--- a/support/ld/maple_native/flash.ld
+++ b/support/ld/maple_native/flash.ld
@@ -26,7 +26,7 @@
MEMORY
{
ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K
- rom (rx) : ORIGIN = 0x08005000, LENGTH = 500K
+ rom (rx) : ORIGIN = 0x08005000, LENGTH = 492K
}
OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
diff --git a/support/ld/maple_native/jtag.ld b/support/ld/maple_native/jtag.ld
index 85aae53..90a0a3f 100644
--- a/support/ld/maple_native/jtag.ld
+++ b/support/ld/maple_native/jtag.ld
@@ -8,8 +8,8 @@
/* Define memory spaces. */
MEMORY
{
- ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K
- rom (rx) : ORIGIN = 0x08005000, LENGTH = 500K
+ ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
+ rom (rx) : ORIGIN = 0x08000000, LENGTH = 512K
}
OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
diff --git a/support/openocd/flash_0.4.0.cfg b/support/openocd/flash_0.4.0.cfg
new file mode 100644
index 0000000..e66d28d
--- /dev/null
+++ b/support/openocd/flash_0.4.0.cfg
@@ -0,0 +1,89 @@
+# script for stm32
+
+interface ft2232
+ft2232_device_desc "Olimex OpenOCD JTAG"
+ft2232_layout olimex-jtag
+ft2232_vid_pid 0x15ba 0x0003
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME stm32
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+# jtag speed speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so ufse F_JTAG = 1MHz
+jtag_khz 1000
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ # See STM Document RM0008
+ # Section 30.6.3
+ set _CPUTAPID 0x3ba00477
+}
+
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+if { [info exists BSTAPID ] } {
+ # FIXME this never gets used to override defaults...
+ set _BSTAPID $BSTAPID
+} else {
+ # See STM Document RM0008
+ # Section 29.6.2
+ # Low density devices, Rev A
+ set _BSTAPID1 0x06412041
+ # Medium density devices, Rev A
+ set _BSTAPID2 0x06410041
+ # Medium density devices, Rev B and Rev Z
+ set _BSTAPID3 0x16410041
+ # High density devices, Rev A
+ set _BSTAPID4 0x06414041
+ # Connectivity line devices, Rev A and Rev Z
+ set _BSTAPID5 0x06418041
+}
+jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \
+ -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 \
+ -expected-id $_BSTAPID4 -expected-id $_BSTAPID5
+
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x5000 -work-area-backup 0
+# TODO: native
+#$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x10000 -work-area-backup 0
+
+flash bank bank0 stm32x 0x08000000 0x00020000 0 0 $_TARGETNAME
+
+proc flash_chip {} {
+ echo "Halting..."
+ halt
+ echo "Erasing..."
+ flash erase_address 0x08000000 0x20000
+ # TODO: native
+ #flash erase_address 0x08000000 0x80000
+ echo "Flashing image..."
+ flash write_bank 0 build/maple.bin 0
+ echo "Verifying image..."
+ verify_image build/maple.bin 0x08000000 bin
+ echo "Checksum verified, resetting chip"
+ reset run
+ echo "Daemon shutdown"
+ shutdown
+}
+
+init
+flash_chip
diff --git a/support/openocd/run_0.4.0.cfg b/support/openocd/run_0.4.0.cfg
new file mode 100644
index 0000000..bbc8864
--- /dev/null
+++ b/support/openocd/run_0.4.0.cfg
@@ -0,0 +1,75 @@
+# script for stm32
+
+interface ft2232
+ft2232_device_desc "Olimex OpenOCD JTAG"
+ft2232_layout olimex-jtag
+ft2232_vid_pid 0x15ba 0x0003
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME stm32
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+# jtag speed speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so ufse F_JTAG = 1MHz
+jtag_khz 1000
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ # See STM Document RM0008
+ # Section 30.6.3
+ set _CPUTAPID 0x3ba00477
+}
+
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+if { [info exists BSTAPID ] } {
+ # FIXME this never gets used to override defaults...
+ set _BSTAPID $BSTAPID
+} else {
+ # See STM Document RM0008
+ # Section 29.6.2
+ # Low density devices, Rev A
+ set _BSTAPID1 0x06412041
+ # Medium density devices, Rev A
+ set _BSTAPID2 0x06410041
+ # Medium density devices, Rev B and Rev Z
+ set _BSTAPID3 0x16410041
+ # High density devices, Rev A
+ set _BSTAPID4 0x06414041
+ # Connectivity line devices, Rev A and Rev Z
+ set _BSTAPID5 0x06418041
+}
+jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \
+ -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 \
+ -expected-id $_BSTAPID4 -expected-id $_BSTAPID5
+
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x5000 -work-area-backup 0
+
+flash bank bank0 stm32x 0x08000000 0x00020000 0 0 $_TARGETNAME
+
+proc nopforever {} {
+ puts "Resetting the chip..."
+ reset run
+}
+
+init
+nopforever
diff --git a/support/scripts/copy-to-ide b/support/scripts/copy-to-ide
index 6f8d5f3..301126d 100755
--- a/support/scripts/copy-to-ide
+++ b/support/scripts/copy-to-ide
@@ -7,6 +7,7 @@ DEST=$1
DEST_REF=$DEST/build/shared/reference
DEST_CORES=$DEST/hardware/leaflabs/cores/maple
+DEST_LIBS=$DEST/libraries
LMAPLE_SRC="LICENSE
./libmaple/*.h
@@ -38,19 +39,22 @@ then
fi
# source
-echo Handling libmaple source
-rm -r $DEST_CORES/*.c $DEST_CORES/*.cpp $DEST_CORES/*.h $DEST_CORES/*.cxx $DEST_CORES/*.inc $DEST_CORES/*.a $DEST_CORES/*.S $DEST_CORES/maple $DEST_CORES/maple_native
+echo Copying libmaple source
+rm -rf $DEST_CORES/*.c $DEST_CORES/*.cpp $DEST_CORES/*.h $DEST_CORES/*.cxx $DEST_CORES/*.inc $DEST_CORES/*.a $DEST_CORES/*.S $DEST_CORES/maple $DEST_CORES/maple_native
cp -R $LMAPLE_SRC $DEST_CORES
+echo Copying over libraries
+cp -R libraries/* $DEST_LIBS
+
# docs
echo Deleting old reference directory contents
-rm -r $DEST_REF/*
+rm -rf $DEST_REF/*
-# echo "\nRebuilding documentation"
-# (cd $LMAPLE_DOCS; doxygen 2>/dev/null 1>/dev/null && make clean 2>/dev/null 1>/dev/null && make html 2>&1 1>/dev/null)
+echo Rebuilding documentation
+( cd $LMAPLE_DOCS; doxygen && make clean 2>/dev/null 1>/dev/null && make html )
echo Copying over documentation
cp -R $LMAPLE_DOCS_BUILD/* $DEST_REF
-echo
-echo "Done. Handle libraries manually!"
+
+echo Done.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 07:09:18 +0000