aboutsummaryrefslogtreecommitdiffstats
path: root/support/scripts
diff options
context:
space:
mode:
Diffstat (limited to 'support/scripts')
-rwxr-xr-xsupport/scripts/reset.py24
1 files changed, 12 insertions, 12 deletions
diff --git a/support/scripts/reset.py b/support/scripts/reset.py
index 6410c56..8ab9b9f 100755
--- a/support/scripts/reset.py
+++ b/support/scripts/reset.py
@@ -37,12 +37,12 @@ def choose_path(possible_paths):
elif len(possible_paths) == 1:
return possible_paths[0]
else:
- print 'Found multiple candidates for the Maple device:'
+ print ('Found multiple candidates for the Maple device:')
return choose_among_options(possible_paths)
def choose_among_options(options):
for (i,p) in enumerate(options):
- print '\t%d. %s' % (i+1, p)
+ print ('\t%d. %s' % (i+1, p))
prompt = 'Enter a number to select one, or q to quit: '
while True:
@@ -63,12 +63,12 @@ plat_sys = platform.system()
plat_bits = platform.architecture()[0]
if plat_sys == 'Linux':
if plat_bits == '64bit':
- print 'You appear to be using 64-bit Linux. Let us know if this works.'
+ print ('You appear to be using 64-bit Linux. Let us know if this works.')
maple_path = unix_get_maple_path('ttyACM')
# fall back on /dev/maple if that doesn't work
if maple_path is None:
maple_path = '/dev/maple'
- print 'Could not find Maple serial port; defaulting to /dev/maple.'
+ print ('Could not find Maple serial port; defaulting to /dev/maple.')
elif plat_sys == 'Darwin':
maple_path = unix_get_maple_path('tty.usbmodem')
elif plat_sys == 'Windows':
@@ -78,17 +78,17 @@ else:
"the path to the Maple's serial port device file:")
if maple_path is None:
- print 'Could not find the Maple serial port for reset.', \
+ print ('Could not find the Maple serial port for reset.', \
'Perhaps this is your first upload, or the board is already', \
- 'in bootloader mode.'
- print
- print "If your sketch doesn't upload, try putting your Maple", \
+ 'in bootloader mode.')
+ print ()
+ print ("If your sketch doesn't upload, try putting your Maple", \
'into bootloader mode manually by pressing the RESET button', \
'then letting it go and quickly pressing button BUT', \
- '(hold for several seconds).'
+ '(hold for several seconds).')
sys.exit()
-print 'Using %s as Maple serial port' % maple_path
+print ('Using %s as Maple serial port' % maple_path)
try:
ser = serial.Serial(maple_path, baudrate=115200, xonxoff=1)
@@ -110,7 +110,7 @@ try:
time.sleep(0.01)
ser.setDTR(0)
time.sleep(0.01)
- ser.write("1EAF")
+ ser.write("1EAF".encode("ascii"))
# Windows quirk: delay a bit before proceeding
if plat_sys == 'Windows': time.sleep(0.5)
@@ -119,6 +119,6 @@ try:
ser.close()
except Exception as e:
- print 'Failed to open serial port %s for reset' % maple_path
+ print ('Failed to open serial port %s for reset' % maple_path)
sys.exit()