diff options
Diffstat (limited to 'support/make/board-includes')
| -rw-r--r-- | support/make/board-includes/VLDiscovery.mk | 7 | ||||
| -rw-r--r-- | support/make/board-includes/cm900.mk | 15 | ||||
| -rw-r--r-- | support/make/board-includes/maple.mk | 10 | ||||
| -rw-r--r-- | support/make/board-includes/maple_RET6.mk | 7 | ||||
| -rw-r--r-- | support/make/board-includes/maple_mini.mk | 7 | ||||
| -rw-r--r-- | support/make/board-includes/maple_native.mk | 7 | ||||
| -rw-r--r-- | support/make/board-includes/olimex_stm32_h103.mk | 7 | ||||
| -rw-r--r-- | support/make/board-includes/opencm904.mk | 15 | ||||
| -rw-r--r-- | support/make/board-includes/st_stm3220g_eval.mk | 5 |
9 files changed, 80 insertions, 0 deletions
diff --git a/support/make/board-includes/VLDiscovery.mk b/support/make/board-includes/VLDiscovery.mk new file mode 100644 index 0000000..76cd85a --- /dev/null +++ b/support/make/board-includes/VLDiscovery.mk @@ -0,0 +1,7 @@ +MCU := STM32F100RB +PRODUCT_ID := 0003 +ERROR_LED_PORT := GPIOC +ERROR_LED_PIN := 9 +MCU_SERIES := stm32f1 +MCU_F1_LINE := value +LD_MEM_DIR := sram_8k_flash_128k diff --git a/support/make/board-includes/cm900.mk b/support/make/board-includes/cm900.mk new file mode 100644 index 0000000..9f70a1b --- /dev/null +++ b/support/make/board-includes/cm900.mk @@ -0,0 +1,15 @@ +MCU := STM32F103C8 +PRODUCT_ID := 0003 +ERROR_LED_PORT := GPIOB +ERROR_LED_PIN := 2 +MCU_SERIES := stm32f1 +MCU_F1_LINE := performance +# This crap is due to ld-script limitations. If you know of a better +# way to go about this (like some magic ld switches to specify MEMORY +# at the command line), please tell us! +ifeq ($(BOOTLOADER),maple) +LD_MEM_DIR := sram_20k_flash_128k +endif +ifeq ($(BOOTLOADER),robotis) +LD_MEM_DIR := sram_20k_flash_128k_robotis +endif diff --git a/support/make/board-includes/maple.mk b/support/make/board-includes/maple.mk new file mode 100644 index 0000000..a2943ce --- /dev/null +++ b/support/make/board-includes/maple.mk @@ -0,0 +1,10 @@ +MCU := STM32F103RB +PRODUCT_ID := 0003 +ERROR_LED_PORT := GPIOA +ERROR_LED_PIN := 5 +MCU_SERIES := stm32f1 +MCU_F1_LINE := performance +# This crap is due to ld-script limitations. If you know of a better +# way to go about this (like some magic ld switches to specify MEMORY +# at the command line), please tell us! +LD_MEM_DIR := sram_20k_flash_128k diff --git a/support/make/board-includes/maple_RET6.mk b/support/make/board-includes/maple_RET6.mk new file mode 100644 index 0000000..138722f --- /dev/null +++ b/support/make/board-includes/maple_RET6.mk @@ -0,0 +1,7 @@ +MCU := STM32F103RE +PRODUCT_ID := 0003 +ERROR_LED_PORT := GPIOA +ERROR_LED_PIN := 5 +MCU_SERIES := stm32f1 +MCU_F1_LINE := performance +LD_MEM_DIR := sram_64k_flash_512k diff --git a/support/make/board-includes/maple_mini.mk b/support/make/board-includes/maple_mini.mk new file mode 100644 index 0000000..b022537 --- /dev/null +++ b/support/make/board-includes/maple_mini.mk @@ -0,0 +1,7 @@ +MCU := STM32F103CB +PRODUCT_ID := 0003 +ERROR_LED_PORT := GPIOB +ERROR_LED_PIN := 1 +MCU_SERIES := stm32f1 +MCU_F1_LINE := performance +LD_MEM_DIR := sram_20k_flash_128k diff --git a/support/make/board-includes/maple_native.mk b/support/make/board-includes/maple_native.mk new file mode 100644 index 0000000..87e58e3 --- /dev/null +++ b/support/make/board-includes/maple_native.mk @@ -0,0 +1,7 @@ +MCU := STM32F103ZE +PRODUCT_ID := 0003 +ERROR_LED_PORT := GPIOC +ERROR_LED_PIN := 15 +MCU_SERIES := stm32f1 +MCU_F1_LINE := performance +LD_MEM_DIR := maple_native # The SRAM chip makes this board special diff --git a/support/make/board-includes/olimex_stm32_h103.mk b/support/make/board-includes/olimex_stm32_h103.mk new file mode 100644 index 0000000..a3304a1 --- /dev/null +++ b/support/make/board-includes/olimex_stm32_h103.mk @@ -0,0 +1,7 @@ +MCU := STM32F103RB +PRODUCT_ID := 0003 +ERROR_LED_PORT := GPIOC +ERROR_LED_PIN := 12 +MCU_SERIES := stm32f1 +MCU_F1_LINE := performance +LD_MEM_DIR := sram_20k_flash_128k diff --git a/support/make/board-includes/opencm904.mk b/support/make/board-includes/opencm904.mk new file mode 100644 index 0000000..64d3351 --- /dev/null +++ b/support/make/board-includes/opencm904.mk @@ -0,0 +1,15 @@ +MCU := STM32F103CB +PRODUCT_ID := 0003 +ERROR_LED_PORT := GPIOB +ERROR_LED_PIN := 9 +MCU_SERIES := stm32f1 +MCU_F1_LINE := performance +# This crap is due to ld-script limitations. If you know of a better +# way to go about this (like some magic ld switches to specify MEMORY +# at the command line), please tell us! +ifeq ($(BOOTLOADER),maple) +LD_MEM_DIR := sram_20k_flash_128k +endif +ifeq ($(BOOTLOADER),robotis) +LD_MEM_DIR := sram_20k_flash_128k_robotis +endif diff --git a/support/make/board-includes/st_stm3220g_eval.mk b/support/make/board-includes/st_stm3220g_eval.mk new file mode 100644 index 0000000..8aaefc9 --- /dev/null +++ b/support/make/board-includes/st_stm3220g_eval.mk @@ -0,0 +1,5 @@ +MCU := STM32F207IG +ERROR_LED_PORT := GPIOG +ERROR_LED_PIN := 6 +MCU_SERIES := stm32f2 +LD_MEM_DIR := sram_112k_flash_1024k |