1 files changed, 0 insertions, 116 deletions
diff --git a/src/wiring/wiring.c b/src/wiring/wiring.c
deleted file mode 100644
index 04de78a..0000000
--- a/src/wiring/wiring.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* *****************************************************************************
- *  This program is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 3 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- *  Created: 12/18/09 02:41:47
- *  Copyright (c) 2009 Perry L. Hung. All rights reserved.
- *
- * ****************************************************************************/
-
-/**
- *  @file wiring.c
- *
- *  @brief
- */
-
-#include "wiring.h"
-#include "stm32f10x_flash.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_map.h"
-#include "stm32f10x_nvic.h"
-#include "systick.h"
-#include "gpio.h"
-
-void RCC_Configuration(void);
-void NVIC_Configuration(void);
-
-void init(void) {
-   RCC_Configuration();
-   RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA |
-                          RCC_APB2Periph_GPIOB |
-                          RCC_APB2Periph_GPIOC |
-                          RCC_APB2Periph_AFIO
-                        , ENABLE);
-   NVIC_Configuration();
-
-   systick_init();
-
-   gpio_init();
-
-   adc_init();
-
-   timer_init(1, 1);
-   timer_init(2, 1);
-   timer_init(3, 1);
-   timer_init(4, 1);
-}
-
-void NVIC_Configuration(void) {
-#ifdef VECT_TAB_ROM
-  NVIC_SetVectorTable(USER_ADDR_ROM, 0x0);
-#warning writing to ROM
-#elif defined VECT_TAB_RAM
-  NVIC_SetVectorTable(USER_ADDR_RAM, 0x0);
-#warning writing to RAM
-#else // VECT_TAB_BASE
-   /* Set the Vector Table base location at 0x08000000 */
-  NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);
-#endif
-}
-
-
-void RCC_Configuration(void) {
-   ErrorStatus HSEStartUpStatus;
-   /* RCC system reset(for debug purpose) */
-   RCC_DeInit();
-
-   /* Enable HSE */
-   RCC_HSEConfig(RCC_HSE_ON);
-
-   /* Wait till HSE is ready */
-   HSEStartUpStatus = RCC_WaitForHSEStartUp();
-
-   if(HSEStartUpStatus == SUCCESS) {
-      /* Enable Prefetch Buffer */
-      FLASH_PrefetchBufferCmd( (u32)FLASH_PrefetchBuffer_Enable);
-
-      /* Flash 2 wait state */
-      FLASH_SetLatency(FLASH_Latency_2);
-
-      /* HCLK = SYSCLK */
-      RCC_HCLKConfig(RCC_SYSCLK_Div1);
-
-      /* PCLK2 = HCLK APB2 Periphs, no prescaler 72MHz */
-      RCC_PCLK2Config(RCC_HCLK_Div1);
-
-      /* PCLK1 = HCLK/2 APB1 periphs = 36MHZ*/
-      RCC_PCLK1Config(RCC_HCLK_Div2);
-
-      /* PLLCLK = 8MHz * 9 = 72 MHz */
-      RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);
-
-      /* Enable PLL */
-      RCC_PLLCmd(ENABLE);
-
-      /* Wait till PLL is ready */
-      while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
-          ;
-
-      /* Select PLL as system clock source */
-      RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
-
-      /* Wait till PLL is used as system clock source */
-      while(RCC_GetSYSCLKSource() != 0x08)
-          ;
-   }
-}