1 files changed, 88 insertions, 0 deletions
diff --git a/src/stm32lib/examples/USART/Synchronous/readme.txt b/src/stm32lib/examples/USART/Synchronous/readme.txt
new file mode 100755
index 0000000..1fb128c
--- /dev/null
+++ b/src/stm32lib/examples/USART/Synchronous/readme.txt
@@ -0,0 +1,88 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name          : readme.txt
+* Author             : MCD Application Team
+* Version            : V2.0.1
+* Date               : 06/13/2008
+* Description        : Description of the USART Synchronous Example.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+Example description
+===================
+This example provides a basic communication between USART1 (Synchronous mode) 
+and SPI1 using flags.
+
+First, the USART1 sends data from TxBuffer1 buffer to SPI1 using USART1 TXE flag.
+Data received, using RXNE flag, by SPI1 is stored in RxBuffer2 then compared with
+the sent ones and the result of this comparison is stored in the "TransferStatus1" 
+variable.
+ 
+Then, the SPI1 sends data from TxBuffer2 buffer to USART1 using SPI1 TXE flag.
+Data received, using RXNE flag, by USART1 is stored in RxBuffer1 then compared with
+the sent ones and the result of this comparison is stored in the "TransferStatus2" 
+variable.   
+
+
+USART1 configured as follow:
+  - BaudRate = 115200 baud  
+  - Word Length = 8 Bits
+  - One Stop Bit
+  - No parity
+  - Hardware flow control disabled (RTS and CTS signals)
+  - Receive and transmit enabled
+  - USART Clock enabled
+  - USART CPOL: Clock is active high
+  - USART CPHA: Data is captured on the second edge 
+  - USART LastBit: The clock pulse of the last data bit is output to the SCLK pin
+
+SPI1 configured as follow:
+  - Direction = 2 Lines FullDuplex
+  - Mode = Slave Mode
+  - DataSize = 8 Bits
+  - CPOL = Clock is active high
+  - CPHA = Data is captured on the second edge 
+  - NSS = NSS Software
+  - First Bit = First Bit is the LSB     
+
+
+Directory contents
+==================
+stm32f10x_conf.h  Library Configuration file
+stm32f10x_it.h    Interrupt handlers header file
+stm32f10x_it.c    Interrupt handlers
+main.c            Main program
+
+
+Hardware environment
+====================
+This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
+boards and can be easily tailored to any other hardware.
+There is no need for any modification when switching between these two boards.
+
+Connect USART1_Tx(PA.09) to SPI1_MOSI(PA.07), USART1_Rx(PA.10) to SPI1_MISO(PA.06)
+and USART1_CK(PA.08) to SPI1_SCK(PA.05).
+ 
+  
+How to use it
+=============
+In order to make the program work, you must do the following :
+- Create a project and setup all your toolchain's start-up files
+- Compile the directory content files and required Library files :
+  + stm32f10x_lib.c
+  + stm32f10x_gpio.c
+  + stm32f10x_rcc.c
+  + stm32f10x_usart.c
+  + stm32f10x_spi.c
+  + stm32f10x_nvic.c
+  + stm32f10x_flash.c    
+
+- Link all compiled files and load your image into target memory
+- Run the example
+
+******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******