aboutsummaryrefslogtreecommitdiffstats
path: root/src/stm32lib/examples/USART/HalfDuplex/readme.txt
diff options
context:
space:
mode:
Diffstat (limited to 'src/stm32lib/examples/USART/HalfDuplex/readme.txt')
-rwxr-xr-xsrc/stm32lib/examples/USART/HalfDuplex/readme.txt80
1 files changed, 80 insertions, 0 deletions
diff --git a/src/stm32lib/examples/USART/HalfDuplex/readme.txt b/src/stm32lib/examples/USART/HalfDuplex/readme.txt
new file mode 100755
index 0000000..1fe24e3
--- /dev/null
+++ b/src/stm32lib/examples/USART/HalfDuplex/readme.txt
@@ -0,0 +1,80 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : readme.txt
+* Author : MCD Application Team
+* Version : V2.0.1
+* Date : 06/13/2008
+* Description : Description of the USART Half Duplex Example.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+Example description
+===================
+This example provides a basic communication between USART1 and USART2 in
+Half-Duplex mode using flags.
+
+First, the USART1 sends data from TxBuffer1 buffer to USART2 using TXE flag.
+Data received using RXNE flag by USART2 is stored in RxBuffer2 then compared with
+the sent ones and the result of this comparison is stored in the "TransferStatus1"
+variable.
+
+Then, the USART2 sends data from TxBuffer2 buffer to USART1 using TXE flag.
+Data received using RXNE flag by USART1 is stored in RxBuffer1 then compared with
+the sent ones and the result of this comparison is stored in the "TransferStatus2"
+variable.
+
+USART1 and USART2 configured as follow:
+ - BaudRate = 230400 baud
+ - Word Length = 8 Bits
+ - One Stop Bit
+ - Even parity
+ - Hardware flow control disabled (RTS and CTS signals)
+ - Receive and transmit enabled
+
+
+Directory contents
+==================
+platform_config.h Evaluation board specific configuration file
+stm32f10x_conf.h Library Configuration file
+stm32f10x_it.h Interrupt handlers header file
+stm32f10x_it.c Interrupt handlers
+main.c Main program
+
+
+Hardware environment
+====================
+This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
+boards and can be easily tailored to any other hardware.
+To select the STMicroelectronics evaluation board used to run the example, uncomment
+the corresponding line in platform_config.h file.
+
+ + STM3210B-EVAL
+ - Connect USART1_Tx(PA.09) to USART2_Tx(PD.05) and connect a pull-up resistor to
+ this line (10K).
+
+ + STM3210E-EVAL
+ - Connect USART1_Tx(PA.09) to USART2_Tx(PA.02) and connect a pull-up resistor to
+ this line (10K).
+
+
+How to use it
+=============
+In order to make the program work, you must do the following :
+- Create a project and setup all your toolchain's start-up files
+- Compile the directory content files and required Library files :
+ + stm32f10x_lib.c
+ + stm32f10x_gpio.c
+ + stm32f10x_rcc.c
+ + stm32f10x_usart.c
+ + stm32f10x_nvic.c
+ + stm32f10x_flash.c
+
+- Link all compiled files and load your image into target memory
+- Run the example
+
+******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******