1 files changed, 0 insertions, 71 deletions
diff --git a/src/stm32lib/examples/TIM/OnePulse/readme.txt b/src/stm32lib/examples/TIM/OnePulse/readme.txt
deleted file mode 100755
index 5f00278..0000000
--- a/src/stm32lib/examples/TIM/OnePulse/readme.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the TIM OnePulse example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-
-This example shows how to use the TIM peripheral to generate a One pulse Mode 
-after a Rising edge of an external signal is received in Timer Input pin.
-
-The TIM2CLK frequency is set to 72 MHz, the Prescaler is 1 so the TIM2 counter
-clock is 36 MHz. 
-The Autoreload value is 65535 (TIM2->ARR), so the maximum frequency value to trigger 
-the TIM2 input is 500 Hz.
-
-The TIM2 is configured as follows: 
-The One Pulse mode is used, the external signal is connected to TIM2 CH2 pin (PA.01), 
-the Rising edge is used as active edge, the One Pulse signal is output 
-on TIM2_CH1 (PA.00).
-
-The TIM_Pulse defines the delay value, the delay value is fixed to 455.08 us:
-delay =  CCR1/TIM2 counter clock = 455.08 us. 
-The (TIM_Period - TIM_Pulse) defines the One Pulse value, the pulse value is fixed to 1.365ms:
-One Pulse value = (TIM_Period - TIM_Pulse)/TIM2 counter clock = 1.365 ms.
-
-
-Directory contents
-==================
-stm32f10x_conf.h  Library Configuration file
-stm32f10x_it.c    Interrupt handlers
-stm32f10x_it.h    Interrupt handlers header file
-main.c            Main program
- 
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-
-- Connect the external signal to the TIM2_CH2 pin (PA.01)
-- Connect the TIM2_CH1 (PA.00) pin to an oscilloscope to monitor the waveform.
-   
-  
-How to use it
-=============
-In order to make the program work, you must do the following:
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files:
-  + stm32f10x_lib.c
-  + stm32f10x_tim.c
-  + stm32f10x_gpio.c
-  + stm32f10x_rcc.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c
-
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******