1 files changed, 0 insertions, 80 deletions
diff --git a/src/stm32lib/examples/NVIC/System_Handlers/readme.txt b/src/stm32lib/examples/NVIC/System_Handlers/readme.txt
deleted file mode 100755
index c67dea2..0000000
--- a/src/stm32lib/examples/NVIC/System_Handlers/readme.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the NVIC System Handlers Example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example demontrates the use of the Nested Vectored Interrupt Controller (NVIC) 
-and system handlers: 
-
-- Assignment of a descendant system handlers preemption priority for each system
-handler:
-   - NMI has -1 as preemption priority
-   - PSV has 0 preemption priority
-   - SVCall has 1 preemption priority
-   - SysTick has 2 preemption priority
-
-- Configuration of SysTick timer to generate an interrupt on each end of count
-
-- In the Systick handler routine: a LED1  toggle each 1s and the SVC instruction
-is executed. This will activate the SVCall handler to preempt the current instruction 
-stream. In the SVCall handler routine, a led connected to LED2 pin is toggling and the
-pending bit of the PSV handler is set by software.
-The PSV which has a higher preemption priority will preempt the SVCall handler and 
-will toggle a LED3. Also, in this handler routine, the NMI pending bit is set and 
-the NMI handler is activated and the LED4 is toggling.
-
-
-Directory contents
-==================
-platform_config.h    Evaluation board specific configuration file
-stm32f10x_conf.h     Library Configuration file
-stm32f10x_it.c       Interrupt handlers
-stm32f10x_it.h       Interrupt handlers header file
-main.c               Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-To select the STMicroelectronics evaluation board used to run the example, uncomment
-the corresponding line in platform_config.h file.
-
- + STM3210B-EVAL 
-    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08
-      and PC.09 pins
- 
- + STM3210E-EVAL
-    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08
-      and PF.09 pins
-
-    
-How to use it
-=============
-In order to make the program work, you must do the following :
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files :
-  + stm32f10x_lib.c
-  + stm32f10x_systick.c
-  + stm32f10x_gpio.c
-  + stm32f10x_rcc.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c
-  
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******