1 files changed, 0 insertions, 69 deletions
diff --git a/src/stm32lib/examples/NVIC/IRQ_Channels/readme.txt b/src/stm32lib/examples/NVIC/IRQ_Channels/readme.txt
deleted file mode 100755
index 1cb8367..0000000
--- a/src/stm32lib/examples/NVIC/IRQ_Channels/readme.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the NVIC IRQ Channels Example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example demontrates the use of the Nested Vectored Interrupt Controller (NVIC)
-IRQ Channels configuration: 
-
-- Configuration of 3 TIM (TIM2..TIM4)timers to generate an interrupt on each 
-  counter update event.
-- The three timers are linked to their correspondant Update IRQ channel.
-- Assignment of a ascendant IRQ priority for each IRQ channel :
-  TIM2 has a preemption priority of 0 and TIM4 has a preemption priority of 2.
-- In each interrupt routine: 
-   - TIM2 toggles a LED1 each 1s 
-   - TIM3 toggles a LED2 each 2s 
-   - TIM4 toggles a LED3 each 3s 
-
-
-Directory contents
-==================
-stm32f10x_conf.h  Library Configuration file
-stm32f10x_it.c    Interrupt handlers
-stm32f10x_it.h    Interrupt handlers header file
-main.c            Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-To select the STMicroelectronics evaluation board used to run the example, uncomment
-the corresponding line in platform_config.h file.
-
- + STM3210B-EVAL 
-    - Use LD1, LD2 and LD3 leds connected respectively to PC.06, PC.07 and PC.08
- 
- + STM3210E-EVAL
-    - Use LD1, LD2 and LD3 leds connected respectively to PF.06, PF0.7 and PF.08
-
-How to use it
-=============
-In order to make the program work, you must do the following :
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files :
-  + stm32f10x_lib.c
-  + stm32f10x_gpio.c
-  + stm32f10x_rcc.c
-  + stm32f10x_nvic.c
-  + stm32f10x_tim.c
-  + stm32f10x_flash.c
-    
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******