diff options
Diffstat (limited to 'src/stm32lib/examples/FSMC/NOR_CodeExecute/readme.txt')
-rwxr-xr-x | src/stm32lib/examples/FSMC/NOR_CodeExecute/readme.txt | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/src/stm32lib/examples/FSMC/NOR_CodeExecute/readme.txt b/src/stm32lib/examples/FSMC/NOR_CodeExecute/readme.txt new file mode 100755 index 0000000..71ac2fd --- /dev/null +++ b/src/stm32lib/examples/FSMC/NOR_CodeExecute/readme.txt @@ -0,0 +1,56 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : readme.txt
+* Author : MCD Application Team
+* Version : V2.0.1
+* Date : 06/13/2008
+* Description : Description of the FSMC NOR_CodeExecute Example.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+Example description
+===================
+This directory contains a set of sources files that describes how to build an
+application to be loaded into the NOR memory mounted on STM3210E-EVAL board then
+execute it from internal Flash.
+
+
+Directory contents
+==================
+ + \binary Contains a set of sources files that build the application
+ to be loaded into the NOR memory mounted on STM3210E-EVAL board.
+ + stm32f10x_conf.h Library Configuration file
+ + stm32f10x_it.c Interrupt handlers
+ + stm32f10x_it.h Header for stm32f10x_it.c
+ + main.c Main program
+
+
+Hardware environment
+====================
+This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
+boards and can be easily tailored to any other hardware.
+
+
+How to use it
+=============
+In order to make the program work, you must do the following:
+1. Program the NOR memory with the example provided in the \binary directory
+2. Program the internal Flash with the code that will jump to the NOR memory to execute
+ the loaded example, for this you have to:
+ - Create a project and setup all your toolchain's start-up files
+ - Compile the directory content files and required Library files:
+ + stm32f10x_lib.c
+ + stm32f10x_gpio.c
+ + stm32f10x_rcc.c
+ + stm32f10x_nvic.c
+ + stm32f10x_flash.c
+ - Link all compiled files and load your image into target memory
+ - Run the example
+
+
+******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******
|