1 files changed, 0 insertions, 76 deletions
diff --git a/src/stm32lib/examples/FLASH/Write_Protection/readme.txt b/src/stm32lib/examples/FLASH/Write_Protection/readme.txt
deleted file mode 100755
index ffc3b3f..0000000
--- a/src/stm32lib/examples/FLASH/Write_Protection/readme.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the FLASH Write_Protection Example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example provides a description of how to enable and disable the write protection
-for the STM32F10x FLASH:
-
-- Enable Write protection: 
-  To enable the Write Protection, uncomment the line "#define WriteProtection_Enable"
-  in main.c file.
-  
-  To protect a set of pages, the user has to call the function FLASH_EnableWriteProtection.
-  The parameter of this function will define the number of pages to be protected.
-  To load the new option byte values, a system Reset is necessary, for this, the
-  function NVIC_GenerateSystemReset() is used.
- 
-- Disable Write protection:
-  To disable the Write Protection, uncomment the line "#define WriteProtection_Disable"
-  in main.c file.
-
-  To disable the write protection of the STM32F10x Flash, an erase of the Option 
-  Bytes is necessary. This operation is done by the function FLASH_EraseOptionBytes.
-  To load the new option byte values, a system Reset is necessary, for this, the
-  function NVIC_GenerateSystemReset() is used.
-
-If the desired pages are not write protected, an erase and a write operation are
-performed.
-
-
-Directory contents
-==================
-platform_config.h    Evaluation board specific configuration file
-stm32f10x_conf.h     Library Configuration file
-stm32f10x_it.h       Interrupt handlers header file
-stm32f10x_it.c       Interrupt handlers
-main.c               Main program
-
-Note: "#define _FLASH_PROG" should be uncommented in the stm32f10x_conf.h file
- 
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-To select the STMicroelectronics evaluation board used to run the example, uncomment
-the corresponding line in platform_config.h file.
-
-  
-How to use it
-=============
-In order to make the program work, you must do the following:
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files:
-  + stm32F10x_lib.c
-  + stm32F10x_flash.c
-  + stm32F10x_rcc.c
-  + stm32F10x_nvic.c
-
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******