1 files changed, 76 insertions, 0 deletions
diff --git a/src/stm32lib/examples/FLASH/Write_Protection/readme.txt b/src/stm32lib/examples/FLASH/Write_Protection/readme.txt
new file mode 100755
index 0000000..ffc3b3f
--- /dev/null
+++ b/src/stm32lib/examples/FLASH/Write_Protection/readme.txt
@@ -0,0 +1,76 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name          : readme.txt
+* Author             : MCD Application Team
+* Version            : V2.0.1
+* Date               : 06/13/2008
+* Description        : Description of the FLASH Write_Protection Example.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+Example description
+===================
+This example provides a description of how to enable and disable the write protection
+for the STM32F10x FLASH:
+
+- Enable Write protection: 
+  To enable the Write Protection, uncomment the line "#define WriteProtection_Enable"
+  in main.c file.
+  
+  To protect a set of pages, the user has to call the function FLASH_EnableWriteProtection.
+  The parameter of this function will define the number of pages to be protected.
+  To load the new option byte values, a system Reset is necessary, for this, the
+  function NVIC_GenerateSystemReset() is used.
+ 
+- Disable Write protection:
+  To disable the Write Protection, uncomment the line "#define WriteProtection_Disable"
+  in main.c file.
+
+  To disable the write protection of the STM32F10x Flash, an erase of the Option 
+  Bytes is necessary. This operation is done by the function FLASH_EraseOptionBytes.
+  To load the new option byte values, a system Reset is necessary, for this, the
+  function NVIC_GenerateSystemReset() is used.
+
+If the desired pages are not write protected, an erase and a write operation are
+performed.
+
+
+Directory contents
+==================
+platform_config.h    Evaluation board specific configuration file
+stm32f10x_conf.h     Library Configuration file
+stm32f10x_it.h       Interrupt handlers header file
+stm32f10x_it.c       Interrupt handlers
+main.c               Main program
+
+Note: "#define _FLASH_PROG" should be uncommented in the stm32f10x_conf.h file
+ 
+
+Hardware environment
+====================
+This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
+boards and can be easily tailored to any other hardware.
+To select the STMicroelectronics evaluation board used to run the example, uncomment
+the corresponding line in platform_config.h file.
+
+  
+How to use it
+=============
+In order to make the program work, you must do the following:
+- Create a project and setup all your toolchain's start-up files
+- Compile the directory content files and required Library files:
+  + stm32F10x_lib.c
+  + stm32F10x_flash.c
+  + stm32F10x_rcc.c
+  + stm32F10x_nvic.c
+
+- Link all compiled files and load your image into target memory
+- Run the example
+
+
+******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******