1 files changed, 0 insertions, 64 deletions
diff --git a/src/stm32lib/examples/FLASH/Program/readme.txt b/src/stm32lib/examples/FLASH/Program/readme.txt
deleted file mode 100755
index a26a157..0000000
--- a/src/stm32lib/examples/FLASH/Program/readme.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the FLASH Program Example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example provides a description of how to program the STM32F10x FLASH.
-
-After Reset, the Flash memory Program/Erase Controller is locked. To unlock it,
-the FLASH_Unlock function is used.
-Before programming the desired addresses, an erase operation is performed using 
-the flash erase page feature. The erase procedure starts with the calculation of
-the number of pages to be used. Then all these pages will be erased one by one by
-calling FLASH_ErasePage function. 
-
-Once this operation is finished, the programming operation will be performed by 
-using the FLASH_ProgramWord function. The written data is then checked and the
-result of the programming operation is stored into the MemoryProgramStatus variable.
-
-
-Directory contents
-==================
-platform_config.h  Evaluation board specific configuration file
-stm32f10x_conf.h   Library Configuration file
-stm32f10x_it.h     Interrupt handlers header file
-stm32f10x_it.c     Interrupt handlers
-main.c             Main program
-
-Note: "#define _FLASH_PROG" should be uncommented in the stm32f10x_conf.h file
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-To select the STMicroelectronics evaluation board used to run the example, uncomment
-the corresponding line in platform_config.h file.
-  
-  
-How to use it
-=============
-In order to make the program work, you must do the following:
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files:
-  + stm32F10x_lib.c
-  + stm32F10x_flash.c
-  + stm32F10x_rcc.c
-  + stm32F10x_nvic.c
-
-- Link all compiled files and load your image into target memory
-- Run the example
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******