1 files changed, 63 insertions, 0 deletions
diff --git a/src/stm32lib/examples/DMA/FLASH_RAM/readme.txt b/src/stm32lib/examples/DMA/FLASH_RAM/readme.txt
new file mode 100755
index 0000000..0810ef3
--- /dev/null
+++ b/src/stm32lib/examples/DMA/FLASH_RAM/readme.txt
@@ -0,0 +1,63 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name          : readme.txt
+* Author             : MCD Application Team
+* Version            : V2.0.1
+* Date               : 06/13/2008
+* Description        : Description of the DMA FLASH to RAM example.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+Example description
+===================
+This example provides a description of how to use a DMA channel to transfer 
+a word data buffer from FLASH memory to embedded SRAM memory.
+
+DMA1 Channel6 is configured to transfer the contents of a 32-word data buffer
+stored in Flash memory to the reception buffer declared in RAM.
+
+The start of transfer is triggered by software. DMA1 Channel6 memory-to-memory
+transfer is enabled. Source and destination addresses incrementing is also enabled.
+The transfer is started by setting the Channel enable bit for DMA1 Channel6.
+At the end of the transfer a Transfer Complete interrupt is generated since it
+is enabled. Once interrupt is generated, the remaining data to be transferred is
+read which must be equal to 0. The Transfer Complete Interrupt pending bit is
+then cleared. A comparison between the source and destination buffers is done to
+check that all data have been correctly transferred.
+
+
+Directory contents
+==================
+stm32f10x_conf.h  Library Configuration file
+stm32f10x_it.c    Interrupt handlers
+stm32f10x_it.h    Interrupt handlers header file
+main.c            Main program
+
+
+Hardware environment
+====================
+This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
+boards and can be easily tailored to any other hardware.
+
+      
+How to use it
+=============
+In order to make the program work, you must do the following :
+- Create a project and setup all your toolchain's start-up files
+- Compile the directory content files and required Library files :
+  + stm32f10x_lib.c
+  + stm32f10x_dma.c
+  + stm32f10x_rcc.c
+  + stm32f10x_nvic.c
+  + stm32f10x_flash.c  
+
+- Link all compiled files and load your image into target memory
+- Run the example
+
+
+******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******