1 files changed, 0 insertions, 67 deletions
diff --git a/src/stm32lib/examples/DMA/ADC_TIM1/readme.txt b/src/stm32lib/examples/DMA/ADC_TIM1/readme.txt
deleted file mode 100755
index dffb9f1..0000000
--- a/src/stm32lib/examples/DMA/ADC_TIM1/readme.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the DMA ADC1 TIM1 example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example provides a description of how to use a DMA channel to transfer
-continuously a data from a peripheral (ADC1) to another peripheral (TIM1) supporting
-DMA transfer.
-The ADC channel14 is configured to be converted continuously. TIM1_CH1 is configured
-to generate a PWM signal on its output.
-The dedicated DMA1 channel5 is configured to transfer in circular mode the last ADC 
-channel14 converted value to the TIM1_CCR1 register. The DMA channel request is driven
-by the TIM1 update event. The duty cycle of TIM1_CH1 output signal is then changed
-each time the input voltage value on ADC channel14 pin is modified.
-The duty cycle variation can be visualized on oscilloscope on the TIM1_CH1 pin
-PA.08 while changing the analog input on ADC channel14 using the potentiometer.
-
-
-Directory contents
-==================
-stm32f10x_conf.h  Library Configuration file
-stm32f10x_it.c    Interrupt handlers
-stm32f10x_it.h    Interrupt handlers header file
-main.c            Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-
- - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin PC.04
-   (potentiometer RV1 on STM3210B-EVAL or STM3210E-EVAL boards)
- - Connect an oscilloscope to TIM1_CH1 (PA.08) pin  
-      
-
-How to use it
-=============
-In order to make the program work, you must do the following :
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files :
-  + stm32f10x_lib.c
-  + stm32f10x_dma.c
-  + stm32f10x_rcc.c
-  + stm32f10x_gpio.c
-  + stm32f10x_adc.c
-  + stm32f10x_tim.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c
-    
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******