1 files changed, 69 insertions, 0 deletions
diff --git a/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/readme.txt b/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/readme.txt
new file mode 100755
index 0000000..2deaeb0
--- /dev/null
+++ b/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/readme.txt
@@ -0,0 +1,69 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name          : readme.txt
+* Author             : MCD Application Team
+* Version            : V2.0.1
+* Date               : 06/13/2008
+* Description        : Description of the DAC two channels triangle wave example.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+Example description
+===================
+This example describes how to use two DAC channels to generate two different
+signals with triangle waves on each DAC Channel output.
+
+DAC channels conversion are configured to be triggered by TIM2 TRGO with triangle
+wave generation. 12bit right data alignement is selected since we choose to acces
+both DAC_DHR12R1 and DAC_DHR12R2 registers.
+A triangle amplitude of 2047 is selected for DAC channel1 and 1023 for DAC channel2.
+Both DAC channels are then enabled. DAC Channel1 DHR12R1 and DAC channel2 DHR12R2
+registers are set to have a base output voltage of VREF/16 on each output.
+
+Once TIM2 is enabled, each TIM2 TRGO update event trigger both DAC channels start
+of conversion. The triangle counter is incremented, added to the base value and
+applied to the corresponding DAC channel output. The same calculation is repeated
+on each trigger.
+The triangle waves can be visualized by connecting both PA.04 and PA.05 pins to
+an oscilloscope.
+
+
+Directory contents
+==================
+stm32f10x_conf.h     Library Configuration file
+stm32f10x_it.c       Interrupt handlers
+stm32f10x_it.h       Header for stm32f10x_it.c
+main.c               Main program
+
+
+Hardware environment
+====================
+This example runs on STMicroelectronics STM3210E-EVAL evaluation board and can be 
+easily tailored to any other hardware.
+
+ - Connect PA.04 and PA.05 pins to an oscilloscope
+
+    
+How to use it
+=============
+In order to make the program work, you must do the following:
+- Create a project and setup all your toolchain's start-up files
+- Compile the directory content files and required Library files:
+  + stm32f10x_lib.c
+  + stm32f10x_gpio.c
+  + stm32f10x_rcc.c
+  + stm32f10x_nvic.c
+  + stm32f10x_flash.c
+  + stm32f10x_dac.c
+  + stm32f10x_tim.c
+  
+- Link all compiled files and load your image into target memory
+- Run the example
+
+
+******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******