1 files changed, 87 insertions, 0 deletions
diff --git a/src/stm32lib/examples/BKP/Backup_Data/readme.txt b/src/stm32lib/examples/BKP/Backup_Data/readme.txt
new file mode 100755
index 0000000..2f60bbf
--- /dev/null
+++ b/src/stm32lib/examples/BKP/Backup_Data/readme.txt
@@ -0,0 +1,87 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name          : readme.txt
+* Author             : MCD Application Team
+* Version            : V2.0.1
+* Date               : 06/13/2008
+* Description        : Description of the BKP Backup_Data Example.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+Example description
+===================
+This example shows how to store user data in the Backup data registers.
+As the Backup (BKP) domain still powered by VBAT when VDD is switched off, its
+contents are not lost if a battery is connected to VBAT pin.
+
+The program behaves as follows:
+1. After startup the program checks if the board has been powered up. If yes, 
+the values in the BKP data registers are checked:
+   – if a battery is connected to the VBAT pin, the values in the BKP data registers
+     are retained
+   – if no battery is connected to the VBAT pin, the values in the BKP data registers
+     are lost
+2. After an external reset, the BKP data registers’ contents are not checked.
+
+Four LEDs connected to the GPIO_LED Pin6 (LD1), Pin7 (LD2), Pin8 (LD3) and Pin9 (LD4)
+are used to monitor the system state as follows:
+1. LD3 on / LD1 on: a Power On Reset occurred and the values in the BKP data
+   registers are correct
+2. LD3 on / LD2 on: a Power On Reset occurred and the values in the BKP data
+   registers are not correct or they have not yet been programmed (if it is the
+   first time the program is executed)
+3. LD3 off / LD1 off / LD2 off: no Power On Reset occurred
+4. LD4 on: program running
+
+
+Directory contents
+==================
+platform_config.h    Evaluation board specific configuration file
+stm32f10x_conf.h     Library Configuration file
+stm32f10x_it.c       Interrupt handlers
+stm32f10x_it.h       Header for stm32f10x_it.c
+main.c               Main program
+main.h               Header for main.c
+
+
+Hardware environment
+====================
+This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
+boards and can be easily tailored to any other hardware.
+To select the STMicroelectronics evaluation board used to run the example, uncomment
+the corresponding line in platform_config.h file.
+
+ + STM3210B-EVAL 
+    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08
+      and PC.09 pins
+    - Use 3V battery on VBAT pin (set jumper JP11 in position 1-2)  
+     
+ + STM3210E-EVAL
+    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08
+      and PF.09 pins
+    - Use 3V battery on VBAT pin (set jumper JP1 in position 1-2)      
+
+    
+How to use it
+=============
+In order to make the program work, you must do the following :
+- Create a project and setup all your toolchain's start-up files
+- Compile the directory content files and required Library files :
+  + stm32f10x_lib.c
+  + stm32f10x_pwr.c
+  + stm32f10x_bkp.c
+  + stm32f10x_gpio.c
+  + stm32f10x_rcc.c
+  + stm32f10x_nvic.c
+  + stm32f10x_flash.c
+  
+- Link all compiled files and load your image into target memory
+- Run the example in standalone mode (without debugger connection)
+- Power on/off the board and check that the BKP contents are not lost
+   
+******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******