1 files changed, 73 insertions, 0 deletions
diff --git a/src/stm32lib/examples/ADC/TIMTrigger_AutoInjection/readme.txt b/src/stm32lib/examples/ADC/TIMTrigger_AutoInjection/readme.txt
new file mode 100755
index 0000000..6e90439
--- /dev/null
+++ b/src/stm32lib/examples/ADC/TIMTrigger_AutoInjection/readme.txt
@@ -0,0 +1,73 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name          : readme.txt
+* Author             : MCD Application Team
+* Version            : V2.0.1
+* Date               : 06/13/2008
+* Description        : Description of the ADC TIM trigger and auto-injection Example.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+Example description
+===================
+This example describes how to convert ADC regular group channels continuously using
+TIM1 external trigger and injected group channels using the auto-injected feature.
+
+ADC1 is configured to convert on each TIM1 capture compare event ADC channel14.
+Each time an end of regular conversion occurs the DMA transfers, the converted data 
+from ADC1 DR register to the ADC_RegularConvertedValueTab table. 
+Enabling the auto-injected feature, allows to convert automatically the injected 
+channel ADC channel11 after the end of the regular channel14. An ADC interrupt is 
+generated then by JEOC flag at the end of the injected channel conversion and in 
+the interrupt routine the result is stored in the ADC_InjectedConvertedValueTab table.
+The procedure is repeated 32 times then the TIM1 peripheral is disabled and thus, 
+no conversion will be done neither regular or injected.
+TIM1 start conversion triggers can be visualized on oscilloscope on PA.08 and at the
+same time the toggle of pin PC.06 which indicates the automatic auto-injection conversion.
+The ADC1 clock is set to 14 MHz.
+
+
+Directory contents
+==================
+stm32f10x_conf.h  Library Configuration file
+stm32f10x_it.c    Interrupt handlers
+stm32f10x_it.h    Interrupt handlers header file
+main.c            Main program
+
+
+
+Hardware environment
+====================
+This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
+boards and can be easily tailored to any other hardware.
+
+ - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin PC.04
+   (potentiometer RV1 on STM3210B-EVAL and STM3210E-EVAL boards) and ADC Channel11 
+   mapped on pin PC.01
+ - Connect PA.08 and PC.06 pins to an oscilloscope
+   
+      
+How to use it
+=============
+In order to make the program work, you must do the following :
+- Create a project and setup all your toolchain's start-up files
+- Compile the directory content files and required Library files :
+  + stm32f10x_lib.c
+  + stm32f10x_adc.c
+  + stm32f10x_dma.c
+  + stm32f10x_tim.c
+  + stm32f10x_gpio.c
+  + stm32f10x_rcc.c
+  + stm32f10x_nvic.c
+  + stm32f10x_flash.c
+  
+- Link all compiled files and load your image into target memory
+- Run the example
+
+
+******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******