1 files changed, 0 insertions, 80 deletions
diff --git a/src/stm32lib/examples/ADC/ExtLinesTrigger/readme.txt b/src/stm32lib/examples/ADC/ExtLinesTrigger/readme.txt
deleted file mode 100755
index ecb06f5..0000000
--- a/src/stm32lib/examples/ADC/ExtLinesTrigger/readme.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the ADC external lines trigger example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example describes how to trigger ADC regular and injected groups channels 
-conversion using two external line events. Discontinuous mode is enabled for regular
-group channel conversion and configured to convert one regular channel on each 
-external trigger.
-
-ADC1 is configured to start regular group channel conversion on EXTI11 event.
-On detection of the first rising edge on PE.11 pin, the conversion of the first regular
-channel (ADC channel4) is done and its converted value is transfered by DMA to 
-ADC_RegularConvertedValueTab table. On the following edge detection, the second 
-regular channel (ADC channel14) is automatically converted and its converted value
-is stored by DMA in the same table. The number of transmitted data by DMA, in this 
-example is limited to 64 data.
-
-The procedure is repeated for both regular channels on each EXTI11 event.
-ADC1 is configured to start injected group channel conversion on EXTI15 event.
-On detection of the first rising edge on PE.15 pin all selected injected channels, which
-are two in this example (ADC channel11 and channel12), are converted and an interrupt 
-is generated on JEOC flag rising at the end of all injected channels conversion. 
-Both injected channels converted results are stored in ADC_InjectedConvertedValueTab 
-table inside the interrupt routine.
-The procedure is repeated for injected channels on each EXTI15 event.
-The ADC1 clock is set to 14 MHz.
-
-
-Directory contents
-==================
-stm32f10x_conf.h  Library Configuration file
-stm32f10x_it.c    Interrupt handlers
-stm32f10x_it.h    Interrupt handlers header file
-main.c            Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-
- - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin PC.04
-   (potentiometer RV1 on STM3210B-EVAL and STM3210E-EVAL boards), ADC Channel4 mapped 
-   on pin PA.04, ADC Channel11 mapped on pin PC.01 and ADC Channel12 mapped on pin PC.02.
- - Connect a push-button to pin PE.11 (EXTI Line11) and another push-button to 
-   pin PE.15 (EXTI Line15).      
-
-   
-How to use it
-=============
-In order to make the program work, you must do the following :
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files :
-  + stm32f10x_lib.c
-  + stm32f10x_adc.c
-  + stm32f10x_dma.c
-  + stm32f10x_exti.c
-  + stm32f10x_gpio.c
-  + stm32f10x_rcc.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c
-    
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******