1 files changed, 78 insertions, 0 deletions
diff --git a/src/stm32lib/examples/ADC/3ADCs_DMA/readme.txt b/src/stm32lib/examples/ADC/3ADCs_DMA/readme.txt
new file mode 100755
index 0000000..00fe3e7
--- /dev/null
+++ b/src/stm32lib/examples/ADC/3ADCs_DMA/readme.txt
@@ -0,0 +1,78 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name          : readme.txt
+* Author             : MCD Application Team
+* Version            : V2.0.1
+* Date               : 06/13/2008
+* Description        : Description of the 3ADCs DMA example.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+Example description
+===================
+This example describes how to use the 3 ADCs in independant conversions. 
+Two of them; ADC1 and ADC3 are transfering continuously converted data using DMA
+while ADC2 converted data are stored using End of conversion interrupt.
+
+ADC1 is configured to converts continuously ADC channel14. Each time an end of
+conversion occurs the DMA1 transfers, in circular mode, the converted data from 
+ADC1 DR register to the ADC1_ConvertedValue variable.
+
+ADC2 is configured to converts continuously ADC channel13. Each time an end of
+conversion occurs an end of conversion interrupt is generated and inside the
+interrupt routine the converted data are read from ADC2 DR register and stored
+into the ADC2_ConvertedValue variable.
+
+ADC3 is configured to converts continuously ADC channel12. Each time an end of
+conversion occurs the DMA2 transfers, in circular mode, the converted data from
+ADC3 DR register to the ADC3_ConvertedValue variable.
+
+The ADCs clocks are set to 14 MHz.
+
+The result of ADC1, ADC2 and ADC3 conversion is monitored through the three
+variables: ADC1ConvertedValue, ADC2ConvertedValue and ADC3ConvertedValue.
+
+
+Directory contents
+==================
+stm32f10x_conf.h  Library Configuration file
+stm32f10x_it.c    Interrupt handlers
+stm32f10x_it.h    Interrupt handlers header file
+main.c            Main program
+
+
+
+Hardware environment
+====================
+This example runs on STMicroelectronics STM3210E-EVAL evaluation board and can be 
+easily tailored to any other hardware.
+
+ - Connect a variable power supply 0-3.3V to ADC Channel12 mapped on pin PC.02
+ - Connect a variable power supply 0-3.3V to ADC Channel13 mapped on pin PC.03
+ - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin PC.04
+   (potentiometer RV1 on STM3210E-EVAL board) 
+   
+      
+How to use it
+=============
+In order to make the program work, you must do the following :
+- Create a project and setup all your toolchain's start-up files
+- Compile the directory content files and required Library files :
+  + stm32f10x_lib.c
+  + stm32f10x_adc.c
+  + stm32f10x_dma.c
+  + stm32f10x_gpio.c
+  + stm32f10x_rcc.c
+  + stm32f10x_nvic.c
+  + stm32f10x_flash.c
+  
+- Link all compiled files and load your image into target memory
+- Run the example
+
+
+******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******