aboutsummaryrefslogtreecommitdiffstats
path: root/source
diff options
context:
space:
mode:
Diffstat (limited to 'source')
-rw-r--r--source/adc.rst5
-rw-r--r--source/external-interrupts.rst3
-rw-r--r--source/timers.rst3
-rw-r--r--source/usart.rst3
4 files changed, 4 insertions, 10 deletions
diff --git a/source/adc.rst b/source/adc.rst
index 451e7f0..f510d2b 100644
--- a/source/adc.rst
+++ b/source/adc.rst
@@ -57,13 +57,10 @@ additional functionality, cost, and package size. More information on
these isolated pins is available in each board's hardware
documentation:
-.. FIXME [0.0.12, Maple Native]
-
* :ref:`Maple <maple-adc-bank>`
* :ref:`Maple RET6 Edition <maple-ret6-adc-bank>`
* :ref:`Maple Mini <maple-mini-adc-bank>`
-
-.. :ref:`Maple Native <maple-native-adc-bank>`
+* :ref:`Maple Native Beta <maple-native-b-adc-bank>`
That said, there are a number of more general things you can do to try
to get good readings. If your input voltage changes relatively
diff --git a/source/external-interrupts.rst b/source/external-interrupts.rst
index 1ab65be..2cf9aea 100644
--- a/source/external-interrupts.rst
+++ b/source/external-interrupts.rst
@@ -34,14 +34,13 @@ because every pin on the Maple connects to what is called an *EXTI
line*, and only one pin per EXTI line can be used for external
interrupts at a time [#fextisports]_.
-.. TODO [0.0.12] Maple Native links
-
The EXTI Line Pin Map for your board lists which pins connect to which
EXTI lines:
* :ref:`Maple <maple-exti-map>`
* :ref:`Maple RET6 Edition <maple-ret6-exti-map>`
* :ref:`Maple Mini <maple-mini-exti-map>`
+* :ref:`Maple Native Beta <maple-native-b-exti-map>`
Function Reference
------------------
diff --git a/source/timers.rst b/source/timers.rst
index ce33f7f..0fa0976 100644
--- a/source/timers.rst
+++ b/source/timers.rst
@@ -82,11 +82,10 @@ you want to use both timer interrupts and PWM in the same program.
Refer to your board's timer pin map to match up timer channels and pin
numbers:
-.. TODO [0.0.12] Native links
-
* :ref:`Maple <maple-timer-map>`
* :ref:`Maple RET6 Edition <maple-ret6-timer-map>`
* :ref:`Maple Mini <maple-mini-timer-map>`
+* :ref:`Maple Native Beta <maple-native-b-timer-map>`
Overhead
^^^^^^^^
diff --git a/source/usart.rst b/source/usart.rst
index fa9c55c..4807431 100644
--- a/source/usart.rst
+++ b/source/usart.rst
@@ -22,8 +22,6 @@ pin, and your Maple board's ground to your device's ground.
.. warning:: Don't connect these pins directly to an RS232 serial
port; they operate at +/- 12V and can damage your board.
-.. TODO [0.0.12/Maple Native] UART4 and UART5, Native links
-
Each LeafLabs board has at least 3 separate USART devices. In the most
simple use case, the RX and TX pins are used to send data at a
predetermined speed (or *baud rate*). Their usage is documented in
@@ -36,6 +34,7 @@ available here:
* :ref:`Maple <maple-usart-map>`
* :ref:`Maple RET6 Edition <maple-ret6-usart-map>`
* :ref:`Maple Mini <maple-mini-usart-map>`
+* :ref:`Maple Native Beta <maple-native-b-usart-map>`
If you use a particular serial port, you cannot also use its
communication pins for other purposes at the same time.