diff options
Diffstat (limited to 'source')
| -rw-r--r-- | source/maple-quickstart.rst | 78 |
1 files changed, 40 insertions, 38 deletions
diff --git a/source/maple-quickstart.rst b/source/maple-quickstart.rst index 0cfaa7d..a4bc55a 100644 --- a/source/maple-quickstart.rst +++ b/source/maple-quickstart.rst @@ -6,7 +6,11 @@ Maple Quickstart Guide ======================== -.. TODO [0.1.0] Update the images; we've changed "to FLASH" -> "to Flash" +.. TODO [0.0.13]: Update the images; e.g., "to FLASH" is now "to Flash" +.. +.. Consider putting the images as a bundle somewhere under +.. static.leaflabs.com that gets downloaded and unpacked if they are +.. not present, but don't get crazy. You'll need a `Maple board <http://leaflabs.com/store/>`_, a `Mini-B USB cable <http://www.google.com/products?q=mini-b+usb+cable>`_, a @@ -39,22 +43,22 @@ From the File menu, select Examples > Digital > Blink: :align: center :alt: Click "Blink" -Next, select Tools > Board > "LeafLabs Maple ... to FLASH": +Next, select Tools > Board > "LeafLabs Maple ... to Flash", where +"..." depends on the board you're using. .. image:: /_static/img/blinky-to-flash.png :align: center - :alt: Upload to FLASH + :alt: Upload to Flash .. note:: - You have the option between RAM and FLASH programming: FLASH saves - the program into permanent memory so the program will be run every - time the Maple is reset, while RAM simply injects the compiled - program into the processor's memory. + You have the choice between Flash and RAM programming. Flash saves + the program into permanent Flash memory. RAM simply puts the + compiled program into the processor's built-in RAM. - Programming to RAM is faster to upload and a buggy program can be - wiped away with a simple reset, while FLASH memory is larger and is - the only option for permanently uploading a program. + Flash memory is larger, and is the only option for permanently + uploading a program. Programming to RAM is faster to upload, and a + buggy program can be wiped away with a simple reset. .. image:: /_static/img/verify_button.png :align: left @@ -90,7 +94,7 @@ CHRG header): .. note:: On OS X, a network interface dialog will pop up every time you plug in - the Maple. + the board. .. image:: /_static/img/osx-unconfigured-popup.png :align: center @@ -105,16 +109,10 @@ CHRG header): :scale: 75% :alt: Click "Apply" -The Maple should blink a short pattern on the blue status LED every -time it is plugged in, reset, or reprogrammed, just to let you know -it's there. If it ever starts throbbing in a slow, smooth pattern, -then you've got a problem: see the :ref:`troubleshooting -<troubleshooting>` page for help. - -If all systems are go, select the Maple's serial port in the Tools > -Serial Port menu. The Maple will appear as something like -:file:`COMx`, :file:`/dev/ttyACMx`, or :file:`/dev/tty.usbmodemxxxxx`, -depending on your platform, like so: +If all systems are go, select your board's serial port in the Tools > +Serial Port menu. It will appear as something like :file:`COMx`, +:file:`/dev/ttyACMx`, or :file:`/dev/tty.usbmodemxxxxx`, depending on +your platform, like so: Windows XP: @@ -134,21 +132,25 @@ OS X: :align: center :alt: Board type and serial port for the OS X -Then press the "Upload" button to upload your program to the -Maple. +Then press the "Upload" button to upload your program over USB. .. image:: /_static/img/upload-button.png :align: center :alt: Click the "Upload" button You should see some text and a progress bar flash by in the status -window of the IDE, then some blinky patterns on the Maple, and then a +window of the IDE, then some quick blinking patterns, followed a constant blinking on and off. Congratulations! You've successfully -uploaded your first program to the Maple. +uploaded your first program to your Maple. + +The built-in status LED should blink in a short pattern every time the +board is plugged in, reset, or reprogrammed. If it ever starts +throbbing in a smooth, even pattern, then you've got a problem; see +this :ref:`troubleshooting item <troubleshooting-throb>` for help. Next, go ahead and modify the file a little bit. If you change the -``delay(1000);`` lines to a different value, the speed of the blink -will change. The value is a time in milliseconds to pause before +number in the ``delay(1000);`` lines, the speed of the blink will +change. The number is a time in milliseconds to pause before continuing with the program, so by default, the LED will be on for 1 second, then off for 1 second, etc. Any time you make any changes, go through the same Verify and Upload process to upload the new version @@ -174,17 +176,16 @@ Use the serial port monitor! As a last step to make sure everything has been configured correctly, let's upload a "Hello, world!" program that will send text from the -Maple back to the IDE over the USB connection. From the File menu, -select Examples > Stubs > HelloWorld (similarly to when you selected -the Blink program), and make sure the correct board and serial port -targets are selected from the Tools menu. +board back to the IDE over the USB connection. + +From the File menu, select Examples > Stubs > HelloWorld (similarly to +how you selected the Blink program), and make sure the correct board +and serial port targets are selected from the Tools menu. Open the Serial Monitor window (on the far right of the toolbar). Then -go back to the code editing window and upload your program (Upload -will recompile your code automatically if there's been any change -since the last Verify). You should get text spit at you over the -serial monitor right after the program is uploaded. Shout back! We -can hear you! +go back to the code editing window and upload your program. You should +get text spit at you over the serial monitor right after the program +is uploaded. Shout back! We can hear you! Go forth exuberantly! --------------------- @@ -202,7 +203,8 @@ computer, you may want to look at the :ref:`Unix toolchain quickstart <unix-toolchain>` guide. It's the tutorial for getting working with your old friends :command:`make`, :command:`gcc`, and :command:`jtag`. -Let us know what you come up with! Tag us with #leaflabs on Twitter, -post in the `forum`_, post on `our wiki's Projects page +Let us know what you come up with! Reach us at `leaflabs +<http://twitter.com/#!/leaflabs>`_ on Twitter, post in the `forum`_, +post on `our wiki's Projects page <http://wiki.leaflabs.com/index.php?title=Projects>`_, track us down in the real world, whatever. We love projects! |