diff options
Diffstat (limited to 'source/usart.rst')
-rw-r--r-- | source/usart.rst | 62 |
1 files changed, 0 insertions, 62 deletions
diff --git a/source/usart.rst b/source/usart.rst deleted file mode 100644 index dbbc81c..0000000 --- a/source/usart.rst +++ /dev/null @@ -1,62 +0,0 @@ -.. _usart: - -USART -===== - -A USART is more commonly known a *serial port*. It's used to transmit -information between Maple and another device (like your computer, -another Maple, etc.). - -.. contents:: Contents - :local: - -.. _usart-circuit: - -Hardware/Circuit Design ------------------------ - -To use a serial port to communicate with an external serial device, -connect the TX pin to your device's RX pin, the RX to your device's TX -pin, and your Maple board's ground to your device's ground. - -.. warning:: Don't connect these pins directly to an RS232 serial - port; they operate at +/- 12V and can damage your board. - -Each LeafLabs board has at least 3 separate USART devices. In the most -simple use case, the RX and TX pins are used to send data at a -predetermined speed (or *baud rate*). Their usage is documented in -the :ref:`Serial Ports <lang-serial>` language reference page. - -Which pins correspond to the USART TX and RX pins are given on your -board's silkscreen, and also in the board-specific USART pin maps -available here: - -* :ref:`Maple <maple-usart-map>` -* :ref:`Maple RET6 Edition <maple-ret6-usart-map>` -* :ref:`Maple Mini <maple-mini-usart-map>` -* :ref:`Maple Native Beta <maple-native-b-usart-map>` - -If you use a particular serial port, you cannot also use its -communication pins for other purposes at the same time. - -Compatible Devices and Specifications -------------------------------------- - -We have successfully used the USART ports with an FT232R-based -USB-serial converter at up to 115200 baud. Higher speeds should -certainly be possible. - -Recommended Reading -------------------- - -* `Wikipedia article on Universal Asynchronous Receiver/Transmitter - (USART) - <http://en.wikipedia.org/wiki/Universal_asynchronous_receiver/transmitter>`_ -* `Arduino Serial reference - <http://arduino.cc/en/Reference/Serial>`_ -* ST `Reference Manual RM0008 - <http://www.st.com/web/en/resource/technical/document/reference_manual/CD00171190.pdf>`_ - (PDF), Chapter 27. -* `Serial and UART Tutorial - <http://www.freebsd.org/doc/en/articles/serial-uart/>`_ (written for - FreeBSD, but contains a large amount of general information). |