diff options
Diffstat (limited to 'source/libmaple/api/stm32.rst')
| -rw-r--r-- | source/libmaple/api/stm32.rst | 118 |
1 files changed, 103 insertions, 15 deletions
diff --git a/source/libmaple/api/stm32.rst b/source/libmaple/api/stm32.rst index 0e45990..4a4ee6c 100644 --- a/source/libmaple/api/stm32.rst +++ b/source/libmaple/api/stm32.rst @@ -1,29 +1,117 @@ .. highlight:: c .. _libmaple-stm32: -``stm32.h`` -=========== +``<libmaple/stm32.h>`` +====================== -General STM32-specific definitions. This file is currently somewhat -incomplete, but it will form the future basis for MCU-specific (rather -than board-specific, which belongs in :ref:`Wirish -<libmaple-vs-wirish>`) configuration. +STM32 chip header. This header supplies various series-specific and +chip-specific macros for the current build target. It's useful both +to abstract away hardware details (e.g. through use of +:ref:`STM32_NR_INTERRUPTS <libmaple-stm32-STM32_NR_INTERRUPTS>`) and +to decide what to do when you want something nonportable (e.g. by +checking :ref:`STM32_MCU_SERIES <libmaple-stm32-STM32_MCU_SERIES>`). -Defines -------- +.. contents:: Contents + :local: + +Determining the Target Series +----------------------------- + +The STM32 series (e.g. STM32F1, STM32F2, etc.) of the current target +can be inspected with ``STM32_MCU_SERIES``. + +.. _libmaple-stm32-STM32_MCU_SERIES: +.. doxygendefine:: STM32_MCU_SERIES + +Allowed values for ``STM32_MCU_SERIES`` are the following. This set is +expected to grow over time. + +.. doxygendefine:: STM32_SERIES_F1 +.. doxygendefine:: STM32_SERIES_F2 +.. doxygendefine:: STM32_SERIES_L1 +.. doxygendefine:: STM32_SERIES_F4 + +Series-Specific Characteristics +------------------------------- + +The macros in this section are only available on some STM32 series. + +STM32F1 +~~~~~~~ + +.. note:: These macros are only available when the current target is + an STM32F1 series MCU (i.e., when :ref:`STM32_MCU_SERIES + <libmaple-stm32-STM32_MCU_SERIES>` is ``STM32_SERIES_F1``). + +The STM32F1 series is further subdivided into :ref:`lines +<stm32-series-f1-lines>`. The line of the current target can be +inspected with ``STM32_F1_LINE``. + +.. doxygendefine:: STM32_F1_LINE + +There are five STM32F1 lines. The corresponding values +``STM32_F1_LINE`` can take are the following, though libmaple doesn't +currently support all of them. + +.. doxygendefine:: STM32_F1_LINE_VALUE +.. doxygendefine:: STM32_F1_LINE_ACCESS +.. doxygendefine:: STM32_F1_LINE_USB_ACCESS +.. doxygendefine:: STM32_F1_LINE_PERFORMANCE +.. doxygendefine:: STM32_F1_LINE_CONNECTIVITY + +MCU Feature Tests +----------------- + +The following defines can be used to determine if the target MCU has +a particular feature. + +.. doxygendefine:: STM32_HAVE_FSMC +.. doxygendefine:: STM32_HAVE_USB + +MCU Characteristics +------------------- + +The following defines give salient characteristics of the target MCU. + +.. doxygendefine:: STM32_NR_GPIO_PORTS +.. _libmaple-stm32-STM32_NR_INTERRUPTS: +.. doxygendefine:: STM32_NR_INTERRUPTS +.. doxygendefine:: STM32_SRAM_END + +Clock Speeds +------------ + +The macros in this section are related to clock rates. As such, they +are really part of the configuration of the MCU, rather than inherent +characteristics of the MCU itself. For instance, it's possible to +change the PCLK1 and PCLK2 clock rates by reconfiguring the :ref:`RCC +<libmaple-rcc>`. libmaple proper never changes any clock rates, but it +does have APIs for doing so (such as :ref:`rcc_configure_pll() +<libmaple-rcc-rcc_configure_pll>`). Because of this, be careful when +using the macros in this section, as they assume that some values are +constant which in fact may be changed. + +The values these macros actually take are typically the maximum values +supported by the MCU. Since these are their actual values in practice +(at least in LeafLabs' current use cases, which have the chips running +as fast as possible), they're still considered useful. .. doxygendefine:: STM32_PCLK1 .. doxygendefine:: STM32_PCLK2 -.. doxygendefine:: STM32_NR_INTERRUPTS -.. doxygendefine:: STM32_NR_GPIO_PORTS + +The following macro, ``STM32_DELAY_US_MULT``, is a libmaple +implementation detail. It was included in this public API page in a +previous release by mistake, and is not deprecated, but using it in +your own code is a bad idea. + .. doxygendefine:: STM32_DELAY_US_MULT -.. doxygendefine:: STM32_SRAM_END -.. _libmaple-stm32-STM32_MCU_SERIES: -.. doxygendefine:: STM32_MCU_SERIES +Deprecated Macros +----------------- -Deprecated Defines ------------------- +.. warning:: The macros in this section are deprecated, and are + available for backwards compatibility only. Do not use + them in new code. .. doxygendefine:: PCLK1 .. doxygendefine:: PCLK2 |