1 files changed, 0 insertions, 72 deletions
diff --git a/source/lang/delay.rst b/source/lang/delay.rst
deleted file mode 100644
index 90ca268..0000000
--- a/source/lang/delay.rst
+++ /dev/null
@@ -1,72 +0,0 @@
-.. highlight:: cpp
-
-.. _lang-delay:
-
-delay()
-=======
-
-Pauses the program for at least a given number of milliseconds. (There
-are 1000 milliseconds in a second.)
-
-Library Documentation
----------------------
-
-.. doxygenfunction:: delay
-
-
-Discussion
-----------
-
-While it is easy to create a blinking LED with the ``delay()``
-function, and many sketches use short delays for such tasks as switch
-debouncing, the use of ``delay()`` in a sketch has significant
-drawbacks.  No other reading of sensors, mathematical calculations, or
-pin manipulation can go on during the delay function, so in effect, it
-brings most other activity to a halt. For alternative approaches to
-controlling timing see the :ref:`millis() <lang-millis>` function
-and the "Blink Without Delay" sketch cited :ref:`below
-<lang-delay-seealso>`\ . More knowledgeable programmers usually
-avoid the use of ``delay()`` for timing of events longer than tens of
-milliseconds, unless the sketch is very simple.
-
-Certain things *do* go on while the ``delay()`` function is
-controlling the STM32 chip, however, because the delay function does
-not disable interrupts. Serial communication that appears at the RX
-pin is recorded, PWM (see :ref:`pwmWrite() <lang-pwmwrite>`\ ) values
-and pin states are maintained, and :ref:`interrupts
-<lang-attachinterrupt>` will work as they should.
-
-
-Example
--------
-
-::
-
-    int ledPin = 13;                 // LED connected to pin 13
-
-    void setup() {
-      pinMode(ledPin, OUTPUT);      // sets the digital pin as output
-    }
-
-    void loop() {
-      digitalWrite(ledPin, HIGH);   // sets the LED on
-      delay(1000);                  // waits for a second
-      digitalWrite(ledPin, LOW);    // sets the LED off
-      delay(1000);                  // waits for a second
-    }
-
-.. _lang-delay-seealso:
-
-See also
---------
-
-
-- :ref:`millis() <lang-millis>`
-- :ref:`micros() <lang-micros>`
-- :ref:`delayMicroseconds() <lang-delayMicroseconds>`
-- (Arduino) `Blink Without Delay
-  <http://arduino.cc/en/Tutorial/BlinkWithoutDelay>`_ example (works
-  unmodified on Maple)
-
-
-.. include:: cc-attribution.txt