diff options
Diffstat (limited to 'source/hardware/maple.rst')
| -rw-r--r-- | source/hardware/maple.rst | 8 |
1 files changed, 6 insertions, 2 deletions
diff --git a/source/hardware/maple.rst b/source/hardware/maple.rst index 69c3845..ca2afd7 100644 --- a/source/hardware/maple.rst +++ b/source/hardware/maple.rst @@ -108,6 +108,9 @@ board from another source, or you could damage it. supplied by up to 18 V. We recommend a barrel jack input voltage **no greater than 12 V**. + Rev5s manufactured after Spring 2011 may still have this error on + the silk, but it has been marked over. + See :ref:`this erratum <maple-barrel-jack>` for more information. Using the Built-in Battery Charger @@ -503,9 +506,10 @@ Rev 3 For reference, the button part number is KMR211GLFS and the flux remover we used is "Precision Electronics Cleaner" from RadioShack, - which is "Safe on most plastics" and contains Dipropylene glycol + which is "Safe on most plastics" and contains: dipropylene glycol monomethyl ether, hydrotreated heavy naphtha, dipropylene glycol - methyl ether acetate, and carbon dioxide. + methyl ether acetate (say that three times fast!), and carbon + dioxide. * **Resistors on pins 0 and 1**: these header pins, which are RX/TX on USART2 (:ref:`Serial2 <lang-serial>`), have resistors in-line |