aboutsummaryrefslogtreecommitdiffstats
path: root/source/hardware/maple-ret6.rst
diff options
context:
space:
mode:
Diffstat (limited to 'source/hardware/maple-ret6.rst')
-rw-r--r--source/hardware/maple-ret6.rst8
1 files changed, 4 insertions, 4 deletions
diff --git a/source/hardware/maple-ret6.rst b/source/hardware/maple-ret6.rst
index 1f3a656..d6a7c0e 100644
--- a/source/hardware/maple-ret6.rst
+++ b/source/hardware/maple-ret6.rst
@@ -279,10 +279,10 @@ This section lists known issues and warnings for the Maple RET6 Edition.
the board's built-in LED; this is the same GPIO bit which is
connected to the DAC's channel 2 output.
-* **Reset and NJTRST tied together**: The MCU's reset pin is tied to
- PB4, the NJTRST (JTAG reset) pin, which is pin 43. Thus, attempting
- to use pin 43 as a GPIO will reset your board (and also prevents the
- JTAG "reset halt" command from working properly).
+* **Reset and NJTRST tied together**: The MCU's reset pin is connected
+ to PB4, the NJTRST (JTAG reset) pin, which is pin 43. Thus,
+ attempting to use pin 43 as a GPIO will reset your board (and also
+ prevents the JTAG "reset halt" command from working properly).
Recommended Reading
-------------------