1 files changed, 62 insertions, 0 deletions
diff --git a/source/faq.rst b/source/faq.rst
index 13347f8..4b5b605 100644
--- a/source/faq.rst
+++ b/source/faq.rst
@@ -1,3 +1,5 @@
+.. highlight:: cpp
+
 .. _faq:
 
 ==================================
@@ -31,3 +33,63 @@ How do I replace ``PROGMEM``/put data into Flash?
 -------------------------------------------------
 
 See :ref:`this note <arm-gcc-attribute-flash>`.
+
+How do I write to a pin at high speed?
+--------------------------------------
+
+Sometimes, :ref:`lang-digitalwrite` just isn't fast enough.  If that's
+your situation, you should first try using fast GPIO writes using the
+low-level :ref:`libmaple-gpio` interface.  This FAQ entry explains
+how.
+
+You'll need to look up the :ref:`GPIO port and bit <gpio-ports>` which
+correspond to the pin you want to write to.  If you don't know what
+that means, don't worry.  We'll go through an example here.
+
+Let's say you want to write to pin 4 on the Maple.  In order to find
+out the port and bit number, take look at the Maple's :ref:`master pin
+map <maple-pin-map-master>` next to "D4".  You'll see that in the
+"GPIO" column, there's "PB5".  That's short for "**P**\ ort **B**, bit
+**5**".  So the GPIO port is "B", and the bit is "5".  (If you're not
+on the Maple, you can find your board's pin map :ref:`from here
+<gpio-pin-maps>`).
+
+That's all you need to know.  Now you can use the function
+``gpio_write_bit()`` to quickly write to the pin.  The way you call it
+is by writing ``gpio_write_bit(GPIO<port>, <bit>, HIGH/LOW)``, where
+``<port>`` is the GPIO port, ``<bit>`` is the bit, and ``HIGH`` or
+``LOW`` is the level you want to write to the pin.  Here's an example
+program which writes pin 4 (GPIOB, bit 5) ``HIGH`` and then ``LOW``
+several times in a row each time it :ref:`lang-loop`\ s::
+
+    /*
+       Fast pin writing example, for Maple.
+
+       This example works for pin 4 (PB5 on Maple).  If you want to
+       use another pin (or are on another board), just change PIN,
+       PIN_PORT, and PIN_BIT as described above.
+    */
+
+    #define PIN 4
+    #define PIN_PORT GPIOB
+    #define PIN_BIT 5
+
+    void setup() {
+        pinMode(PIN, OUTPUT);
+    }
+
+    void loop() {
+        gpio_write_bit(PIN_PORT, PIN_BIT, HIGH);
+        gpio_write_bit(PIN_PORT, PIN_BIT, LOW);
+        gpio_write_bit(PIN_PORT, PIN_BIT, HIGH);
+        gpio_write_bit(PIN_PORT, PIN_BIT, LOW);
+    }
+
+Now, if you've already tried this and you still can't get enough
+speed, there are some threads on the `forum`_ which might help you
+squeeze a little extra out of your board.  First, a `general summary
+<http://forums.leaflabs.com/topic.php?id=860>`_ of other things to
+try, with measurements of the speed you'll get.  Next, a thread
+featuring a `detailed discussion on pin capability
+<http://forums.leaflabs.com/topic.php?id=774>`_, with a focus on
+writes.