diff options
Diffstat (limited to 'source/compatibility.rst')
| -rw-r--r-- | source/compatibility.rst | 35 |
1 files changed, 16 insertions, 19 deletions
diff --git a/source/compatibility.rst b/source/compatibility.rst index cf4c2b3..7eb0a8f 100644 --- a/source/compatibility.rst +++ b/source/compatibility.rst @@ -83,34 +83,32 @@ differences, most of which are improvements: full 32-bit (4 byte) integer values instead of the regular 16-bit (2 byte) Arduino values. -* `pinMode()`_ types: any :ref:`GPIO <gpio>` (including analog pins) - can be configured into one of the following modes with a single call - to `pinMode()`_: ``OUTPUT``, ``OUTPUT_OPEN_DRAIN``, - ``INPUT_FLOATING``, ``INPUT_PULLUP``, +* :ref:`pinMode() <lang-pinmode>` types: any :ref:`GPIO <gpio>` + (including analog pins) can be configured into one of the following + modes with a single call to ```pinMode()``: ``OUTPUT``, + ``OUTPUT_OPEN_DRAIN``, ``INPUT_FLOATING``, ``INPUT_PULLUP``, ``INPUT_PULLDOWN``. Additionally, the PWM and Analog Input pins can be configured as ``INPUT_ANALOG`` and ``PWM`` respectively. See the :ref:`GPIO documentation <gpio>` for more information. - .. TODO: reference libmaple docs above when they're done - -* Serial1 syntax: like the `Arduino Mega +* ``Serial1`` syntax: like the `Arduino Mega <http://arduino.cc/en/Main/ArduinoBoardMega>`_, the Maple has - multiple USART ports. By default, Serial is not mapped to any of - them, use ``Serial1`` through ``Serial3`` instead. - - .. TODO: reference libmaple docs for Serial[n] above when they're done + multiple :ref:`USART ports <lang-serial>`. By default, ``Serial`` + is not mapped to any of them, use ``Serial1`` through ``Serial3`` + instead. * 16-bit :ref:`PWM <pwm>`: Arduino boards support 8-bit PWM, which - means that calls to `analogWrite()`_ take values between 0 (always - off) and 255 (always on). The Maple supports 16-bit PWM, so the - corresponding values should be between 0 (always off) and 65535 - (always on). + means that calls to :ref:`analogWrite() <lang-analogwrite>` take + values between 0 (always off) and 255 (always on). The Maple + supports 16-bit PWM, so the corresponding values should be between 0 + (always off) and 65535 (always on). * 12-bit :ref:`ADC <adc>`: Arduino boards support 10-bit ADC, which - means that calls to `analogRead()`_ will return values between 0 and - 1023. The Maple supports 12-bit ADC, so the same call will instead - return values between 0 and 4095. + means that calls to :ref:`analogRead() <lang-analogread>` will + return values between 0 and 1023. The Maple supports 12-bit ADC, so + the same call will instead return values between 0 and 4095. +Stub (unfinished) .. class:: ported-feature @@ -130,5 +128,4 @@ I sorta work And I am also ordinary -Stub (unfinished) |