1 files changed, 114 insertions, 0 deletions
diff --git a/source/arduino/attachinterrupt.rst b/source/arduino/attachinterrupt.rst
new file mode 100644
index 0000000..27a1d77
--- /dev/null
+++ b/source/arduino/attachinterrupt.rst
@@ -0,0 +1,114 @@
+.. _arduino-attachinterrupt:
+
+attachInterrupt(interrupt, function, mode)
+==========================================
+
+
+
+Description
+-----------
+
+Specifies a function to call when an external interrupt occurs.
+Replaces any previous function that was attached to the interrupt.
+Most Arduino boards have two external interrupts: numbers 0 (on
+digital pin 2) and 1 (on digital pin 3). The Arduino Mega has an
+additional four: numbers 2 (pin 21), 3 (pin 20), 4 (pin 19), and 5
+(pin 18).
+
+
+
+Parameters
+----------
+
+**interrupt**: the number of the interrupt (*int*)
+
+
+
+**function**: the function to call when the interrupt occurs; this
+function must take no parameters and return nothing. This function
+is sometimes referred to as an *interrupt service routine.*
+
+
+
+**mode** defines when the interrupt should be triggered. Four
+contstants are predefined as valid values:
+
+
+-  **LOW** to trigger the interrupt whenever the pin is low,
+-  **CHANGE** to trigger the interrupt whenever the pin changes
+   value
+-  **RISING** to trigger when the pin goes from low to high,
+-  **FALLING** for when the pin goes from high to low.
+
+
+
+Returns
+-------
+
+none
+
+
+
+Note
+----
+
+*Inside the attached function, delay() won't work and the value returned by millis() will not increment. Serial data received while in the function may be lost. You should declare as volatile any variables that you modify within the attached function.*
+
+
+
+Using Interrupts
+----------------
+
+Interrupts are useful for making things happen automatically in
+microcontroller programs, and can help solve timing problems. A
+good task for using an interrupt might be reading a rotary encoder,
+monitoring user input.
+
+
+
+If you wanted to insure that a program always caught the pulses
+from a rotary encoder, never missing a pulse, it would make it very
+tricky to write a program to do anything else, because the program
+would need to constantly poll the sensor lines for the encoder, in
+order to catch pulses when they occurred. Other sensors have a
+similar interface dynamic too, such as trying to read a sound
+sensor that is trying to catch a click, or an infrared slot sensor
+(photo-interrupter) trying to catch a coin drop. In all of these
+situations, using an interrupt can free the microcontroller to get
+some other work done while not missing the doorbell.
+
+
+
+Example
+-------
+
+::
+
+    int pin = 13;
+    volatile int state = LOW;
+    
+    void setup()
+    {
+      pinMode(pin, OUTPUT);
+      attachInterrupt(0, blink, CHANGE);
+    }
+    
+    void loop()
+    {
+      digitalWrite(pin, state);
+    }
+    
+    void blink()
+    {
+      state = !state;
+    }
+
+
+
+See also
+--------
+
+
+-  `detachInterrupt <http://arduino.cc/en/Reference/DetachInterrupt>`_
+
+