1 files changed, 0 insertions, 103 deletions
diff --git a/main.cpp b/main.cpp
deleted file mode 100644
index db310c0..0000000
--- a/main.cpp
+++ /dev/null
@@ -1,103 +0,0 @@
-// Sample i2c master example for development i2c branch. Writes 0-63 to
-// addresses 0-63 on a 24LC256 EEPROM, then reads them back.
-
-#include <string.h>
-#include "wirish.h"
-#include "i2c.h"
-
-static const uint8 slave_address = 0b1010001;
-
-#define NR_ELEMENTS 64
-uint8 buf0[NR_ELEMENTS + 2] = {0x0, 0x0};
-uint8 buf1[] = {0x0, 0x0};
-uint8 buf2[NR_ELEMENTS];
-
-i2c_msg msgs[3];
-
-void toggle(void) {
-    digitalWrite(2, HIGH);
-    digitalWrite(2, LOW);
-}
-
-void setup() {
-    uint32 bytes = 1;
-    uint32 i;
-    int32 rc = -1;
-
-    pinMode(BOARD_LED_PIN, OUTPUT);
-    Serial2.begin(9600);
-    Serial2.println("Hello!");
-
-    pinMode(2, OUTPUT);
-    digitalWrite(2, LOW);
-
-    for (i = 2; i < sizeof buf0; i++) {
-        buf0[i] = i - 2;
-    }
-
-    i2c_master_enable(I2C1, 0);
-
-    while (bytes < 64) {
-        Serial2.print("Writing ");
-        Serial2.print(bytes);
-        Serial2.print(" bytes...");
-
-        /* Write test pattern  */
-        msgs[0].addr = slave_address;
-        msgs[0].flags = 0;
-        msgs[0].length = 2+ bytes;
-        msgs[0].data = buf0;
-        i2c_master_xfer(I2C1, msgs, 1);
-        delay(5);
-
-        /* Read it back */
-        msgs[1].addr = slave_address;
-        msgs[1].flags = 0;
-        msgs[1].length = 2;
-        msgs[1].data = buf1;
-        /* Repeated start condition */
-        msgs[2].addr = slave_address;
-        msgs[2].flags = I2C_MSG_READ;
-        msgs[2].length = bytes;
-        msgs[2].data = buf2;
-        i2c_master_xfer(I2C1, msgs + 1, 2);
-
-        /* Compare */
-        rc = memcmp(&buf0[2], buf2, bytes);
-        if (rc == 0) {
-            Serial2.println("good!");
-        } else {
-            Serial2.println("failed!");
-        }
-
-        delay(5);
-        bytes++;
-    }
-}
-
-int32 rc;
-
-void loop() {
-    toggleLED();
-    delay(100);
-    rc = i2c_master_xfer(I2C1, msgs + 1, 2);
-    if (rc < 0) {
-        Serial2.println("Failed transfer!");
-        i2c_master_enable(I2C1, 0);
-    }
-}
-
-// Force init to be called *first*, i.e. before static object allocation.
-// Otherwise, statically allocated object that need libmaple may fail.
-__attribute__(( constructor )) void premain() {
-    init();
-}
-
-int main(void) {
-    setup();
-
-    while (1) {
-        loop();
-    }
-    return 0;
-}